Design and preparation of oxygen electrocatalysts for nonaqueous lithium oxygen batteries

... rate performance and cycle stability of the batteries The slow kinetics can only be avoided with the use of effective catalysts The design and preparation of oxygen electrocatalysts has therefore ... catalyst, and with LiI catalyst for a DOD of 1000 mAh/g and a current density of 2000 mA/g b) Electrochemical curves and c) cyclability and the end of charge and end -of- discharge voltages of CNT ... 1 The dawn of lithium oxygen batteries 9 2 The components of lithium oxygen batteries and their issues 11 2.2.1 Major cell configurations of LOBs 11 2.2.2 Lithium anode...

Design and preparation of nanostructures for applications

... DESIGN AND PREPARATION OF NANOSTRUCTURES FOR APPLICATIONS NEO MIN SHERN (B.Sc.(Hons.), NUS) A THESIS SUBMITTED FOR THE DEGREE OF DOCTOR OF PHILOSOPHY DEPARTMENT OF CHEMISTRY NATIONAL ... based on the bandgap size and relative position of the valence band and conduction band energy levels of the core and shell components Figure 1.5 Schematic diagram of the different type of core-shell ... PbS and nm PbS/CdS, (c-d) 6nm PbS and nm PbS/CdS, and (e-f) nm PbS and nm PbS/CdS 111 4.2 XRD patterns of (a) nm PbS and nm PbS/CdS; (b) nm PbS and nm PbS/CdS; (c) nm PbS and nm PbS/CdS Standard...

279
1,223
0

báo cáo hóa học:" Research Article Design and Implementation of a Testbed for IEEE 802.15.4 (Zigbee) Performance Measurements" doc

... for that particular packet All of these packets are picked up by BaseStation.java listening on the USB port and it saves each consecutive packet in a file for future analysis A new file is created ... created for each trial A second Java program (Analyze.java) was developed to analyze the saved files containing the received packets Since the transmitted data is known, this program can easily calculate ... channel, the transmitter node always transmits the same data packet The first octets are AM BER = header information and the dummy data payload is decimal number 85 which was chosen simply because...

Báo cáo y học: "Optimal design and validation of antiviral siRNA for targeting HIV-1" potx

... part by grants from the Ministry of Education, Culture, Sports, Science and Technology of Japan (to YN, KU-T, KS, and YT), the Ministry of Health, Labour and Welfare of Japan (to YT), and the ... Next, siRNAs were evaluated for their antiviral efficacy against three evolutionary-distant groups of HIV-1: subtypes B and B' (Thailand variant of subtype B [16]); subtype C; and CRF01_AE Each siRNA ... CRF01_AE 93JP-NH1 (AB052995) siRNA vs target sequence perfect matches imperfect matches Figure Validation of 41 siRNAs Validation of 41 siRNAs The antiviral efficacy of each siRNA was tested against...

Design and implementation of a testbed for indoor mimo systems

... channel In addition, w e only pay attention to uniform antenna arrays in this section, that is, all an tennas are aligned and equally separated in the tran sm it and receive antenna arrays 8 2.2.1 ... create b aseb and signal and m odulation type to be applied in the tran sm itter and to receive reco vered data signal for channel capacity co m p u tin g (figure 19) Both b aseb an d and IF parts ... creates a sine w ave o f 12.5M H z to shift base b a n d signal to IF band before passing through D ACs Figure 23: Baseband Transmitter Diagram a) Data G en erato r b) W alsh code G en erato...

Design and analysis of computer experiments for stochastic systems

... the design and metamodeling methods for the Design and Analysis of Computer Experiments( DACE) for stochastic systems In this chapter, we ﬁrst brieﬂy introduce the background and development of ... 2.3 Review of Design of Experiment for Computer Simulation 2.3 Review of Design of Experiment for Computer Simulation Experimenters use the design of experiment to increase the information gained ... INTRODUCTION 1.1 Computer Simulation Model and Computer Experiments 1 1.2 Deterministic Simulation Model and Computer Experiments 1.3 Stochastic Simulation Model and Computer Experiments ...

Design and modeling of wireless link for biomedical implantable applications

... external monitoring apparatus For most cases, the communication link is composed of power link and data link The power link consists of two closely spaced coils intended for wireless power transfer ... implantation for MICS band and xi ISM band 75 Figure 4-13 Machine used for coating the implantable antennas 77 Figure 4-14 Fabricated implantable antenna and measurement setup for the implantable ... resistance values are adopted For most applications, there are two data links, the downlink and the uplink [22] The downlink usually transmits control and command signals, and the data is transferred...

DESIGN AND CONSTRUCTION OF BIOSENSING PLATFORMS FOR THE DETECTION OF BIOMARKERS

... (Os-RP), and the other is a novel ruthenium complex-tethered redox polymer (Ru-RP) The biosensing membranes are formed through the co-immobilization of glucose oxidase (GOx) and the mediators on the ... sensitive and highly accurate detection devices in a variety of research and commercial applications This thesis focuses on the development of novel biosensing platforms for glucose and deoxyribonucleic ... the separation of the fluorophore and the quencher, resulting in the restoration of the fluorescence.129, 130 Alternatively, other than the direct modification of substrate DNA, fluorophore and...

Design and development of a bioreactor for ligament tissue engineering

... (lateral collateral ligament and medial collateral ligament) , and two interior ligaments (anterior cruciate ligament (ACL) and posterior cruciate ligament) , which help control stabilisation and ... Rotating Wall Bioreactor 28 2.2.2.3 The Flow Perfusion Bioreactor 29 CHAPTER 3: DESIGN AND FABRICATION OF BIAXIAL MECHANICAL STIMULATION AND PERFUSION BIOREACTOR 32 3.1 DESIGN CRITERIA 32 3.2 MATERIAL ... field of tissue engineering has shown to be a promising alternative in using cell transplantation as a strategy to achieve tissue repair and regeneration for a variety of therapeutic needs One approach...

Design and experimentation of surgical devices for voice restoration

... and thus translating to lower costs 1.3 Research scope and organization of thesis This study focuses on the design and development of two separate surgical devices to aid the restoration of voice ... complete system for deployment of the micro-clip 35 Device for TEP and voice prosthesis insertion This chapter will focus on the design, implementation and evaluation of a device for TEP and voice prosthesis ... fold scar, cumulating in better surgical outcomes and cost savings for patients For voice restoration, an improvement in the current voice restoration method of voice prosthesis insertion is required...

API - 2510A - Fire-Protection Considerations for the Design and Operation of Liquefied Petroleum Gas (LPG) Storage Facilities

... Is the primary root valve available and accessible to shut off the line? Could water be FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUIFIED PETROLEUM GAS (LPG) STORAGE FACILITIES ... Institute FOREWORD This publication covers aspects of the design, operation, and maintenance of liqueÞed petroleum gas (LPG) storage facilities from the standpoints of prevention and control of releases, ... ßame impingement problems if the leakage were ignited For the FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUIFIED PETROLEUM GAS (LPG) STORAGE FACILITIES same reasons, all...

44
2,758
0

the chemical laboratory its design and operation a practical guide for planners of industrial, medical, or educational facilities

... THE CHEMICAL LABORATORY: ITS DESIGN AND OPERATION THE CHEMICAL LABORATORY: ITS DESIGN AND OPERATION A Practical Guide for Planners of Industrial, Medical, or Educational Facilities ... Arguments for Additional Space Educational Laboratory Requirements Fume Hoods Analytical Balances Other Equipment Planning for the Future Storage Areas Industrial, Medical, and Research Laboratories Educational ... discussed in Chapter A partial check list of operations for an industrial chemical laboratory is shown in Table The format of a formal list will vary considerably from one laboratory to another, but...

Báo cáo hóa học: " Design and Fabrication of Fiber-Optic Nanoprobes for Optical Sensing" pdf

... 19 Holland L: Vacuum Deposition of Thin Films Wiley, New York; 1956 doi:10.1007/s11671-010-9744-5 Cite this article as: Zhang et al.: Design and Fabrication of Fiber-Optic Nanoprobes for Optical ... nanoprobe fabrication A thin film of an optically opaque metal such as aluminum, silver, or gold is coated along the outside walls of the tapered optical fiber tip to form an optical light pipe free of ... gives reliable nanoprobes with well-defined nanoapertures of circular geometry, and the length of the optical fiber nanoprobes can be longer, which can make coupling of light into the optical fibers...

Báo cáo hóa học: " Research Article Design and Analysis of an Energy-Saving Distributed MAC Mechanism for Wireless Body Sensor Networks" doc

... can be completely avoided and the lifetime of the BSN can be prolonged Another energy-efficient TDMA-based MAC protocol for wireless BSNs is the BodyMAC [13], which uses flexible and efficient bandwidth ... conditions, an energy-efficiency comparison between DQMAC performance and that of the standard facto 802.15.4 MAC and the BSN -MAC is portrayed BSN -MAC has been selected as a reference benchmark for its ... sensing and backoff periods) Based on that, we propose here a novel DQ -MAC energy-efficiency theoretical analysis for nonsaturation conditions and evaluate its performance in front of 802.15.4 MAC and...

Báo cáo hóa học: "Research Article WING/WORLD: An Open Experimental Toolkit for the Design and Deployment of IEEE " ppt

... methodologies and algorithms can be tested and evaluated in an isolated environment In this work, an open approach is used to design and deploy a wireless mesh networking toolkit where o the- shelf and ... lightweight loads, and the limited radio capabilities, due to small antennas and low power WiFi cards On the other hand, embedded platforms provide high flexibility in terms of custom and off -the- shelf ... tools and OSes can be used On the other hand, the Gateworks boards deliver higher performances and support up to miniPCI wireless adapters enabling effective multiradio/multichannel deployments The...

Xem thêm