... by ”RESET”, etc.- IS ”Axis lock“ is providedApplication example(s) Release of the clamping of the axes (in case of axes with clamping) (e.g. with rotary tables).Note: If the clamping is released ... traversing direction of the rotary axis (irres-pective of the actual position) unambiguously.S If AC or G90 is programmed, the traversing direction is dependent on the actual position of the rotary ... actual position, the axis will traversein the positive direction of rotation, otherwise, in the negative direction of rotation.S Use of ACP and ACN: For unsymmetrical workpieces, it must be possible...