... can configure an IP address. Step 2: Configure TCP /IP to use a static IPaddress Right-click My Network Places, and then click Properties. This will display the Network and Dial-Up Connections ... Properties. 4. The Internet Protocol (TCP /IP) Properties dialog box appears. 5. Click Use The Following IP Address. 6. In the IPAddress box, the Subnet Mask box, and the Default Gateway box, type ... command prompt, type “ipconfig /all” and then press Enter. This will display the TCP /IP information configured on the physical and logical adapters in the computer. 3. Record the current TCP/IP...
... __________________________________________________________________________ port numbers 1 - 5 CCNA 2: Routers and Routing Basics v 3.0 - Lab 10.2.5 Copyright 2003, Cisco Systems, Inc. Lab 10.2.5 Well-Known Port Numbers and Multiple Sessions ... command to represent the interface. 3 - 5 CCNA 2: Routers and Routing Basics v 3.0 - Lab 10.2.5 Copyright 2003, Cisco Systems, Inc. f. List some of the Local Addressport numbers (number ... access by issuing the ip http server command in global configuration mode. Step 5 Use the workstation browser to access the router a. Open a browser on Host 1 and type http:/ /ip- address of Router...
... router. ã Show multiple HTTP and Telnet sessions on a single host. ã Show multiple HTTP and Telnet sessions on a single host. ã Observe well-known TCP port numbers on the host and router. Background/Preparation ... Lab 10.2.5 Well Known Port Numbers and Multiple Sessions Router Designation Router Name FA0/0 Address Subnet mask Enable Secret password Enable/VTY/Console ... access by issuing the ip http server command in global configuration mode. Step 5 Use the workstation browser to access the router a. Open a browser on Host 1 and type http:/ /ip- address of Router...
... regarding the IP addresses as illustrated in the exhibit above, are true? (Select three options.)A. Address C is a public Class C address. B. Address C is an exclusive Class C address. C. Address ... Address B is a public Class B address. D. Address A is a public Class A address. E. Address B is a private Class B address. F. Address A is an exclusive Class A address. Q25. You were told to ... CiscoSystem2(config-if)# ipaddress 192.216.32.39 255.255.255.248D. CiscoSystem2(config-if)# ipaddress 192.216.32.63 255.255.255.248 no shutE. CiscoSystem2(config-if)# ipaddress 192.216.32.39...
... interface Ethernet 0 description "will pass DHCP and BootP requests to CCM" ip address 192.168.105.1 255.255.255.0 ip helper -address 192.168.101.100 ipx network 200 ! interface ... CCM, the IP phones, and VoIP gateways is done through IP. You also can integrate Cisco Call Manager with legacy PBXs or key-systems using VoIP gateways. Cisco Call Manager can support only ... manages all the dial plans for the IP phones. It appears to the Cisco VoIP gateways as another H.323 device and acts as a proxy for all the IP phones. The Cisco IP phones can use either the G.711...
... over IP Technology Chapter 6 Voice over IP Benefits and Applications Chapter 7 IP Tutorial Chapter 8 VoIP: An In-Depth Analysis Chapter 9 Quality of Service Chapter 6. Voice over IP Benefits ... (a PC or an IP phone) to dynamically receive an IPaddress (that is, the IPaddress does not need to be statically configured into the device). So, for instance, if you have an IP phone configured ... combined voice and data network would provide the expected savings. Acme's Convergence Plan and Goals It is important to understand where the customer's network stands today and where...
... 9.3.5 Troubleshooting Routing Issues with show ip route and show ip protocols Objective ã Use the show ip route and show ip protocol commands to diagnose a routing configuration problem. ... corrected the RIP configuration problem. So again type the show ip protocol command to observe what networks are being routed. b. From the Birmingham router, type the following: BHM#show ip protocol ... LAN. So use the show ip protocol command to view the routing protocol status. From the Birmingham router, type the following: BHM#show ip protocol b. What networks is RIP routing? _____________________...
... allow the recipients of a sessiondescription to participate in the session. SDP includes the following information: [RFC2327]Session name and purpose● Address andport number ● Start and stop ... established over a number of bearer networksviz., TCP /IP, ATM etc.5.1.2 Events and SignalsVoice Over IP : Protocols and Standardshttp://www.cis.ohio-state.edu/~jain/cis788-99/voip_protocols/index.html ... protocols and standards● References● List of Acronyms● INTRODUCTIONVoice over IP (VOIP) uses the Internet Protocol (IP) to transmit voice as packets over an IP network. So VOIP can beachieved...
... Troubleshooting Routing Issues with show ip route and show ip Protocols Router Designation Router Name FastEthernet 0 Address Interface type Serial 0 Address Subnet mask for both interfaces ... 192.168.3.1 DTE 192.168.2.2 255.255.255.0 class cisco Objective ã Use the show ip route and show ip protocol commands to diagnose a routing configuration problem. Background/Preparation Cable ... Gadsden router 1 - 6 CCNA 2: Routers and Routing Basics v 3.0 - Lab 9.3.5 Copyright 2003, Cisco Systems, Inc. GAD#ping host -ip For example for host with IP Address, type the following: GAD#ping...
... viên tin học” CHIA SẺ - KINH NGHIỆM - HỌC TẬP - THỦ THUẬTPart 4 - IP Address Trong phần này chúng ta sẽ tìm hiểu về TCP/IPv4. IPv4 có 32bit chia thành 4 Octet ( mỗi Octet có 8bit, tương đương ... Bit: Bit nhận dạng lớp dùng để phân biệt địa chỉ IP thuộc lớp nào.- Network ID: Địa chỉ của mạng- Host ID: Địa chỉ của máyNhư vậy với một số IP được viết dưới dạng nhị phân ví dụ là 11111111.11111111.11111111.11111111 ... 3 Các IP có dạng X.Y.Z.0 & X.Y.Z.255 dùng làm Host ID & Broadcast cho mạng của mìnhNhư vậy nếu mạng tôi không quá lớn thì tôi vẫn có thể sử dụng Subnet 192.168.1.0/24 để gán IP cho...
... của địa chỉ IP là 3 con số trong từng Octet. Ví dụ: địa chỉ IP thường thấy trên thực tế có thể là 53.143.10.2 nhưng dạng đầy đủ là 053.143.010.002. b / Các lớp địa chỉ IP Địa chỉ IP chia ra ... Internet. Phần II: Cấu trúc địa chỉ IP a/ Thành phần và hình dạng của địa chỉ IP Địa chỉ IP đang được sử dụng hiện tại (IPv4) có 32 bit chia thành 4 Octet ( mỗi Octet có 8 bit, tương đương 1 byte ... địa chỉ IP còn cần đến tên riêng của các máy chủ (Host) - Domain Name ). Các phần tiếp theo chúng ta hãy nghiên cứu cấu trúc đặc biệt của địa chỉ Internet. Phần II: Cấu trúc địa chỉ IP a/ Thành...
... is: IP Address 192.168.14.2 IP subnet mask 255.255.255.0 Default gateway 192.168.14.2 b. The configuration for the host connected to the Birmingham Router is: IP Address 192.168.16.2 IP subnet ... > Accessories > Command Prompt. This will open a Command Prompt window. b. Test that the TCP /IP stack and default gateway on the workstation are configured and work properly. Use the ... can be used in IOS command to represent the interface. 3 - 4 CCNA 2: Routers and Routing Basics v 3.0 - Lab 4.2.6 Copyright 2003, Cisco Systems, Inc. Erasing and reloading the router...
... is: IP Address 192.168.14.2 IP subnet mask 255.255.255.0 Default gateway 192.168.14.2 b. The configuration for the host connected to the Birmingham Router is: IP Address 192.168.16.2 IP subnet ... FastEthernet 0 address Interface type Serial 0 Serial 0 address Interface type Serial 1 Serial 1 address Subnet mask all addressesRouter 1 GAD 192.168.14.1 DCE 192.168.15.1 NA No address ... > Accessories > Command Prompt. This will open a Command Prompt window. b. Test that the TCP /IP stack and default gateway on the workstation are configured and work properly. Use the...