routing protocols and concepts version 4 0 chapter 11 answers
Routing Protocols and Concepts: Chapter 4 pptx
... 10. 2 .0. 0 is directly connected, Serial0 /0/ 0 R 10. 3 .0. 0 [1 20/ 1] via 10. 2 .0. 2, 00 :00 : 04 , Serial0 /0/ 0 C 10. 1 .0. 0 is directly connected, FastEthernet0 /0 R 10 .4. 0. 0 [1 20/ 2] via 10. 2 .0. 2, 00 :00 : 04 , ... Serial 0/ 0 /0 10. 3 .0. 0 available through interface Serial 0/ 0/1 R3: 10. 3 .0. 0 available through interface Serial 0/ 0 /0 10 .4. 0. 0 available through interface FastEthernet 0/ 0 21 Initial Exchange of Routing ... network 10 .4. 0. 0 on Serial 0/ 0 /0 with a metric of (new) Stores network 10 .4. 0. 0 in the routing table with a metric of Same update from R2 contains information about network 10. 3 .0. 0 on Serial 0/ 0/0...
- 71
- 342
- 0
Routing Protocols and Concepts – Chapter 4 docx
... send For example an update out Serial 0/ 0 /0 g containing the network 10. 1 .0. 0 because R2 learned about that network through Serial 0/ 0 /0 ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights reserved ... 172.16.3 .0/ 24 is hop and that the direction is out the interface S0 /0/ 0 t i t f toward R2 d R2 ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights reserved Cisco Public Distance Vector Routing Protocols ... not yet know about 10 0 and that R3 does not yet know about 10 .4. 0. 0 10. 1 .0. 0? –Full knowledge and a converged network will not take place until there is another exchange of routing information...
- 44
- 390
- 0
Chapter 4 - Distance Vector Routing Protocols Routing Protocols and Concepts CCNA pps
... www.bkacad.com 13 Routing Table Maintenance • RIP uses timers – Update timer 30s – Invalid timer 180s – Holddown timer 180s – Flush timer 2 40 s Học viện mạng Bách Khoa - Website: www.bkacad.com 14 Routing ... Distance Vector Routing Protocols • Examples of Distance Vector routing protocols: – Routing Information Protocol (RIP) RFC 1 508 • Hop count is used as the metric • Max hop is 15 • Routing updates ... vector routing protocols Describe the network discovery process of distance vector routing protocols using Routing Information Protocol (RIP) Describe the processes to maintain accurate routing...
- 40
- 258
- 0
Tài liệu Routing Protocols and Concepts: Chapter 6 pot
... 111 1111 1 .111 100 00. 000 000 00. 000 000 00 111 1111 1 .111 1 100 0 .00 000 000 .00 000 000 111 1111 1 .111 11 100 .00 000 000 .00 000 000 111 1111 1 .111 111 10. 000 000 00. 000 000 00 111 1111 1 .111 1111 1 .00 000 000 .00 000 000 111 1111 1 .111 1111 1. 100 000 00. 000 000 00 111 1111 1 .111 1111 1.1 100 000 0 .00 000 000 ... 111 1111 1 .111 1111 1.1 100 000 0 .00 000 000 111 1111 1 .111 1111 1 .11 100 000 .00 000 000 111 1111 1 .111 1111 1 .111 100 00. 000 000 00 111 1111 1 .111 1111 1 .111 1 100 0 .00 000 000 111 1111 1 .111 1111 1 .111 11 100 .00 000 000 111 1111 1 .111 1111 1 .111 111 10. 000 000 00 ... 111 1111 1 .111 1111 1. 100 000 00. 000 000 00 111 1111 1 .111 1111 1.1 100 000 0 .00 000 000 111 1111 1 .111 1111 1 .11 100 000 .00 000 000 111 1111 1 .111 1111 1 .111 100 00. 000 000 00 111 1111 1 .111 1111 1 .111 1 100 0 .00 000 000 111 1111 1 .111 1111 1 .111 11 100 .00 000 000 111 1111 1 .111 1111 1 .111 111 10. 000 000 00...
- 50
- 888
- 0
Tài liệu Routing Protocols and Concepts: Chapter 10 ppt
... Network 10. 5 .0. 0/16 via R2 Serial 0/ 0 /0 at a cost of 22 20 33 Determining the Shortest Path Network 10. 6 .0. 0/16 via R3 Serial 0/ 0/1 at a cost of 34 Determining the Shortest Path 10 Network 10. 7 .0. 0/16 ... Shortest Path 20 10 37 Determining the Shortest Path 10 10 Network 10. 10. 0 .0/ 16 via R3 Serial 0/ 0/1 at a cost of 25 38 Determining the Shortest Path Network 10. 11 .0. 0/16 via R3 Serial 0/ 0/1 at a cost ... from R4: Connected to neighbor R1 on network 10 .4. 0. 0/16, cost of 20 Connected to neighbor R3 on network 10. 7 .0. 0/16, cost of 10 Connected to neighbor R5 on network 10. 10. 0 .0/ 16, cost of 10 29...
- 51
- 322
- 0
Routing Protocols and Concepts: Chapter 11 ppt
... ID 10. 3.3.3 10. 2.2.2 Pri 1 State FULL/ FULL/ - Dead Time 00 :00 : 30 00: 00: 33 Address 192.168. 10. 6 192.168. 10. 2 Interface Serial0 /0/ 1 Serial0 /0/ 0 Dead Time 00 :00 :36 00 :00 :37 Address 192.168. 10. 10 ... 192.168. 10. 1 Interface Serial0 /0/ 1 Serial0 /0/ 0 Dead Time 00 :00 : 34 00 :00 :38 Address 192.168. 10. 9 192.168. 10. 5 Interface Serial0 /0/ 1 Serial0 /0/ 0 R2# show ip ospf neighbor Neighbor ID 10. 3.3.3 10. 1.1.1 ... 192.168. 10. 0/ 30 is subnetted, subnets 192.168. 10. 0 [1 10/ 845 ] via 192.168. 10. 9, 14: 31:52, Serial0 /0/ 1 [1 10/ 845 ] via 192.168. 10. 5, 14: 31:52, Serial0 /0/ 0 192.168. 10 .4 is directly connected, Serial0 /0 192.168. 10. 8...
- 111
- 1,514
- 0
Routing Protocols and Concepts: Chapter 2 pot
... 1 200 , 2 40 0, 9 600 , 19 200 , 3 8 40 0, 5 600 0, 6 40 00 , 7 200 0, 12 500 0, 148 00 0, 500 000 , 800 000 , 100 000 0, 1 300 000 , 200 000 0, and 40 00 000 l If DTE interface is configured with the clock rate command, IOS disregards ... serial 0/ 0 /0 R1(config-if)# clock rate 6 40 00 01 : 10: 28: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0 /0/ 0, changed state to up l Available clock rates, in bits per second, are 1 200 , 2 40 0, ... Commands to Verify Interface Configuration R1# show interfaces fastethernet 0/ 0 FastEthernet0 /0 is up, line protocol is up Hardware is AmdFE, address is 00 0c. 301 0.92 60 (bia 00 0c. 301 0.92 60) Internet...
- 110
- 335
- 0
Routing Protocols and Concepts: Chapter 5 doc
... 192.168.1 .0/ 24 192.168.2 .0/ 24 192.168.3 .0/ 24 [1 20/ 1] via [1 20/ 2] via is directly is directly [1 20/ 1] via 192.168.2.2, 00 :00 :02 , Serial0 /0/ 0 192.168.2.2, 00 :00 :02 , Serial0 /0/ 0 connected, FastEthernet0 /0 ... 192.168 .4. 2, 00 :00 :08 , Serial0 /0/ 1 192.168 .4. 2, 00 :00 :08 , Serial0 /0/ 1 192.168 .4. 2, 00 :00 :08 , Serial0 /0/ 1 25 Verifying RIP: show ip route Command R1# show ip route R 192.168.5 .0/ 24 [1 20/ 2] ... networks are used: 172. 30. 0 .0/ 16 192.168 .4. 0/ 24 192.168.5 .0/ 24 The 172. 30. 0 .0/ 16 network is subnetted into three subnets: 172. 30. 1 .0/ 24 172. 30. 2 .0/ 24 172. 30. 3 .0/ 24 The 192.168 .4. 0/ 24 network is subnetted...
- 81
- 353
- 0
Routing Protocols and Concepts: Chapter 7 potx
... R C C C S 172. 30. 0 .0/ 16 [1 20/ 1] via 209 .165. 200 .2 30, 00 :00 :09 , Serial0 /0/ 0 [1 20/ 1] via 209 .165. 200 .2 34, 00 :00 :11, Serial0 /0/ 1 209 .165. 200 .0/ 30 is subnetted, subnets 209 .165. 200 .232 is directly ... ip route R 172. 30. 0 .0/ 16 [1 20/ 1] via 209 .165. 200 .2 30, 00 :00 :09 , Serial0 /0/ 0 [1 20/ 1] via 209 .165. 200 .2 34, 00 :00 :11, Serial0 /0/ 1 209 .165. 200 .0/ 30 is subnetted, subnets C 209 .165. 200 .232 is directly ... 209 .165. 200 .229, 00 :00 :16,Serial0 /0/ 0 209 .165. 200 .228 is directly connected, Serial0 /0/ 0 10. 0 .0. 0/8 [1 20/ 1] via 209 .165. 200 .229, 00 :00 :16, Serial0 /0/ 0 R1 has its own 172. 30. 0 .0 routes: 172. 30. 2 .0/ 24...
- 80
- 396
- 0
Routing Protocols and Concepts: Chapter 8 doc
... FastEthernet0 /0 C 172.16.2 .0 is directly connected, Serial0 /0/ 0 R 172.16.3 .0 [1 20/ 1] via 172.16.2.2, 00 :00 :25, Serial0 /0/ 0 R 192.168.1 .0/ 24 [1 20/ 1] via 172.16.2.2, 00 :00 :25, Serial0 /0/ 0 R2# show ... 172.16 .0. 0/ 24 is subnetted, subnets 172.16 .4. 0 is directly connected, Serial0 /0/ 1 172.16.1 .0 [1 20/ 1] via 172.16.2.1, 00 :00 :08 , Serial0 /0/ 0 172.16.2 .0 is directly connected, Serial0 /0/ 0 172.16.3 .0 ... 172.16 .4. 0 is directly connected, Serial0 /0/ 1 172.16.1 .0 [1 20/ 1] via 172.16.2.1, 00 :00 :08 , Serial0 /0/ 0 172.16.2 .0 is directly connected, Serial0 /0/ 0 172.16.3 .0 is directly connected, FastEthernet0/0...
- 87
- 290
- 0
Routing Protocols and Concepts: Chapter 3 docx
... summary, 00 : 04 : 07 , Null0 172.16.1 .0/ 24 [ 90/ 217 241 6] via 172.16.3.1, 00 :11: 11, S0 /0/ 0 172.16.2 .0/ 24 is directly connected, FastEthernet0 /0 172.16.3 .0/ 30 is directly connected, Serial0 /0/ 0 10. 0 .0. 0/ 30 ... summary, 00 :03 :11, Null0 192.168. 10 .4/ 30 is directly connected, Serial0 /0/ 0 192.168. 10. 8/ 30 is directly connected, Serial0 /0/ 1 172.16 .0. 0/16 [ 90/ 217 241 6] via 192.168. 10. 5, 00 :03 :23, S0 /0/ 0 [ 90/ 217 241 6] ... Serial0 /0/ 0 10. 0 .0. 0/ 30 is subnetted, subnets C 10. 1.1 .0 is directly connected, Loopback1 D 192.168.1 .0/ 24 [ 90/ 217 241 6] via 192.168. 10. 10, 00 :02 : 54, S0 /0/ 1 The 192.168. 10. 0/ 24 and 172.16 .0. 0/16...
- 136
- 280
- 0
Routing Protocols and Concepts: Chapter 3 pptx
... Serial0 /0/ 1 R 192.168.5 .0/ 24 [1 20/ 1] via 192.168 .4. 1, 00 :00 :08 , Serial0 /0/ 1 D 192.168.6 .0/ 24 [ 90/ 217 241 6] via 192.168.2.1, 00 :00 : 24, Serial0 /0/ 0 R 192.168.7 .0/ 24 [1 20/ 1] via 192.168 .4. 1, 00 :00 :08 , ... connected, Serial0 /0/ 1 R 192.168.5 .0/ 24 [1 20/ 1] via 192.168 .4. 1, 00 :00 :26, Serial0 /0/ 1 R 192.168.6 .0/ 24 [1 20/ 1] via 192.168.2.1, 00 :00 : 24, Serial0 /0/ 0 [1 20/ 1] via 192.168 .4. 1, 00 :00 :26, Serial0 /0/ 1 R 192.168.7 .0/ 24 ... 192.168.1 .0/ 24 [ 90/ 217 241 6] via 192.168.2.1, 00 :00 : 24, Serial0 /0 C 192.168.2 .0/ 24 is directly connected, Serial0 /0/ 0 C 192.168.3 .0/ 24 is directly connected, FastEthernet0 /0 C 192.168 .4. 0/ 24 is directly...
- 52
- 339
- 0
Routing Protocols and Concepts – Chapter 1 potx
... config-register ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights reserved Cisco Public 21 Configuration register: 0, 1, and and above ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All ... register: 2 102 and 2 142 ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights reserved Cisco Public 23 Configuration register Router(config)#config-register value ITE PC v4 .0 Chapter © 200 7 Cisco ... addresses Default gateway ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights reserved Cisco Public 40 Configure Devices and Apply Addresses ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights...
- 100
- 442
- 0
Routing Protocols and Concepts – Chapter 2 ppt
... bits per second, are 1 200 , 2 40 0, 9 600 , 19 200 , 3 8 40 0, 5 600 0, 6 40 00 , 7 200 0, 12 500 0, 148 00 0, 500 000 , 800 000 , 100 000 0, 1 300 000 , 200 000 0, 100 000 0 1 300 000 200 000 0 and 40 00 000 40 00 000 –Some bit rates might ... –For example, the networks 10. 0 .0. 0/16, 10. 1 .0. 0/16, 10. 2 .0. 0/16, 10. 3 .0. 0/16, 10 .4. 0. 0/16, 10. 5 .0. 0/16, a the way 0 0/ 6, 0/ 6, 0 0/ 6, 0/ 6, all e ay through 10. 255 .0. 0/16 can be represented by ... 172.16.3 .0/ 24 network ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights reserved Cisco Public 41 Static Routes ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights reserved Cisco Public 42 ...
- 64
- 444
- 0
Routing Protocols and Concepts – Chapter 3 ppsx
... (FastEthernet0 /0) , g=192.168. 14. 2, len 60, forward *Mar 19: 14: 37.978: IP: s =0. 0 .0. 0 (FastEthernet0 /0) , d=255.255.255.255, len 6 04 , rcvd *Mar 19: 14: 44. 122: IP: s =0. 0 .0. 0 (FastEthernet0 /0) , d=255.255.255.255, ... has a route to the 192.168.8 .0/ 24 network that is hops away •R 192 168 0/ 24 [1 20/ 2] via R 192.168.8 .0/ 24 192.168 .4. 1, 00 :00 :26, Serial0 /0/ 1 ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights ... 19: 14: 36 .00 6: IP: tableid =0, s=192.168. 14. 2 (FastEthernet0 /0) , d=192.168.16.2 (Serial0 /0) , routed via RIB *Mar 19: 14: 36 .00 6: IP: s=192.168. 14. 2 (FastEthernet0 /0) , d=192.168.16.2 (Serial0 /0) ,...
- 41
- 499
- 0
Routing Protocols and Concepts – Chapter 6 docx
... 192.168.32 .0 / 20 1 100 000 0 101 0 100 0 00 100 000 00 000 000 Answer: ITE PC v4 .0 Chapter 1 100 000 0 101 0 100 0 00 100 000 00 000 000 1 100 000 0 101 0 100 0 00 100 001 00 000 000 1 100 000 0 101 0 100 0 00 100 0 10 000 000 00 … … 1 100 000 0 ... 192.168 .0. 0/ 30 192.168 .0 .4/ 30 192.168 .0. 8/ 30 192 168 8/ 30 192.168 .0. 16/29 1 100 000 0 1 100 000 0 1 100 000 0 1 100 000 0 101 0 100 0 101 0 100 0 101 0 100 0 101 0 100 0 00 000 000 00 000 000 00 000 000 00 000 000 00 000 000 00 000 100 ... 00 001 000 00 0 100 00 192.168 .4. 0/ 30 192.168.5 .0/ 30 192.168.6 .0/ 30 192 168 0/ 30 192.168.7 .0/ 29 1 100 000 0 1 100 000 0 1 100 000 0 1 100 000 0 101 0 100 0 101 0 100 0 101 0 100 0 101 0 100 0 00 000 100 00 000 101 00 000 1 10 000 001 11...
- 42
- 444
- 0
Routing Protocols and Concepts – Chapter 7 ppsx
... class B network 172. 30. 0 .0/ 16: –172. 30. 100 .0/ 24 (FastEthernet 0/ 0) 172. 30. 100 .0/ 24 –172. 30. 1 10. 0/ 24 (Loopback 0) –172. 30. 200 .16/28 (Loopback 1) –172. 30. 200 .32/28 (L 172 30 200 32/28 (Loopback 2) ... R1 and R3 have had the 172. 30. 0 .0/ 16 network subnetted into / 24 subnets subnets –Four of these / 24 subnets are assigned: –two to R1 (172. 30. 1 .0/ 24 and ( 172. 30. 2 .0/ 24) –two to R3 (172. 30. 100 .0/ 24 ... own 172 30 0 routes: 172. 30. 0 .0 172. 30. 2 .0/ 24 and 172. 30. 1 .0/ 24 •But R1 does not send R2 those subnets •R3 has a similar routing table •Both R1 and R3 are b B th d boundary routers and d t d...
- 35
- 426
- 0
Routing Protocols and Concepts – Chapter 8 pptx
... default route (0. 0 .0. 0) What is classful? Classful means that a class A subnet should be shown as x 0 such as 10 0 255 .0. 0 .0 x .0. 0 .0 10. 0 .0. 0 255 0 If you show it as 10 .44 .0. 0 255.255 .0. 0, you are ... exit interface of Serial 0/ 0 /0 R 172.16.3 .0 [1 20/ 1] via 172.16.2.2, 00 :00 :25, Serial0 /0/ 0 ITE PC v4 .0 Chapter © 200 7 Cisco Systems, Inc All rights reserved Cisco Public 25 Routing Table Lookup Process ... as x.x .0. 0 255.255 .0. 0 such as 172.29 .0. 0 255.255 .0. 0 If you show it as 172.29.26 .0 255.255.255 .0, you are breaking its class Let’s assume RIP knows about 10. 0 .0. 0 If you break 10. 0 .0. 0 into...
- 45
- 458
- 0
Routing Protocols and Concepts – Chapter 9 doc
... case, 10, 000 ,00 0 divided by 10 24 equals 9765.625 The 625 is dropped before multiplying by 256 The bandwidth portion of the composite metric is 49 9 8 40 2 ,49 9, 8 40 ITE PC v4 .0 Chapter © 200 7 Cisco ... multicast 2 24 0 10 lti t 2 24. 0. 0. 10 If the EIGRP packet is encapsulated in an Ethernet frame, the destination MAC address is also a multicast address: 01 -00 5E -00 -00 -0A ITE PC v4 .0 Chapter © 200 7 Cisco ... bandwidth value, then you should modify the bandwidth value, The default bandwidth for ethernet is 10, 000 Kbits The default bandwidth for fastethernet is 100 ,00 0 Kbits ITE PC v4 .0 Chapter © 200 7...
- 77
- 359
- 0
Routing Protocols and Concepts – Chapter 11 potx
... addresses: 2 24. 0. 0.5 or 2 24. 0. 0.6 2 24 0 Data Link Frame Header –Contains - destination MAC address is also a multicast address: 01 -00 -5E -00 00- 05 or 01 -00 -5E -00 -00 -06 ITE PC v4 .0 Chapter © 200 7 Cisco ... log-adjacency-changes network 10. 0 .0. 0 0. 0 .0. 7 area network 10. 0 .0. 0 0. 0.3.255 area network 0 0 255 255 255 255 area 0. 0 .0. 0 255.255.255.255 ITE PC v4 .0 Chapter http://blog.ioshints.info/ 200 6 /11/ network-statements-in-ospfprocess-are.html ... fw(config-router)#network 0. 0 .0. 0 255.255.255.255 fw(config router)#network 0 0 255 255 255 255 area fw(config-router)#network 10. 0 .0. 0 0. 0.3.255 area 13 :06 :57: %OSPF-6-AREACHG: 10. 0 .0. 0 255.255.252 .0 changed...
- 71
- 327
- 0
- ccna exploration accessing the wan version 4 0 chapter 2 answers
- ccna exploration routing protocols and concepts version 4 0 answers chapter 3
- ccna exploration 4 0 routing protocols and concepts chapter 1 exam answers
- ccna exploration routing protocols and concepts version 4 0 chapter 1 answers
- ccna exploration routing protocols and concepts version 4 0 chapter 3 answers
- ccna exploration routing protocols and concepts version 4 0 answers chapter 1
- ccna exploration routing protocols and concepts version 4 0 answers chapter 10
- ccna exploration routing protocols and concepts version 4 0 answers chapter 11
- ccna exploration routing protocols and concepts version 4 0 answers chapter 6
- routing protocols and concepts version 4 0 chapter 6 answers
- ccna exploration routing protocols and concepts version 4 0 chapter 10 answers
- routing protocols and concepts version 4 0 english chapter 11 answers
- routing protocols and concepts version 4 0 erouting chapter 1 answers
- routing protocols and concepts version 4 0 english chapter 1 answers
- ccna exploration routing protocols and concepts version 4 0 chapter 6 answers
Tìm thêm: hệ việt nam nhật bản và sức hấp dẫn của tiếng nhật tại việt nam xác định các mục tiêu của chương trình xác định các nguyên tắc biên soạn khảo sát chương trình đào tạo của các đơn vị đào tạo tại nhật bản xác định thời lượng học về mặt lí thuyết và thực tế tiến hành xây dựng chương trình đào tạo dành cho đối tượng không chuyên ngữ tại việt nam khảo sát các chương trình đào tạo theo những bộ giáo trình tiêu biểu nội dung cụ thể cho từng kĩ năng ở từng cấp độ phát huy những thành tựu công nghệ mới nhất được áp dụng vào công tác dạy và học ngoại ngữ mở máy động cơ lồng sóc mở máy động cơ rôto dây quấn các đặc tính của động cơ điện không đồng bộ hệ số công suất cosp fi p2 đặc tuyến hiệu suất h fi p2 đặc tuyến mômen quay m fi p2 đặc tuyến dòng điện stato i1 fi p2 sự cần thiết phải đầu tư xây dựng nhà máy phần 3 giới thiệu nguyên liệu từ bảng 3 1 ta thấy ngoài hai thành phần chủ yếu và chiếm tỷ lệ cao nhất là tinh bột và cacbonhydrat trong hạt gạo tẻ còn chứa đường cellulose hemicellulose chỉ tiêu chất lượng theo chất lượng phẩm chất sản phẩm khô từ gạo của bộ y tế năm 2008