... was originally written as a Ph D thesis (see end of file for original Dutch information printed inthe thesis at this page) i MULTI-WAY ANALYSIS INTHEFOODINDUSTRY Models, Algorithms & Applications ... methods described inthe thesis It is interesting to develop models and algorithms according to the nature of the data, instead of trying to adjust the data to the nature of the model In an attempt ... 1.1 INTRODUCTION The subject of this thesis is multi-way analysis The problems described mostly stem from thefoodindustry This is not coincidental as the data analytical problems arising in the...
... agitation and heating of the process fluid • Claim delivers up to 50% energy savings and reduced processing time (30 mins from 60 mins) for the intensive wort boiling stage of the brewing process PDX® ... is introduced into a special annular "conditioning" chamber that is wrapped around the core of the PDX Reactor unit • It is injected into the process fluid at supersonic conditions generating ... Continuous Wort Boiling • wort is in- line heated up to its boiling temperature • Added hop is also homogenized An adapted agitator is assuring a sufficient mixing for the trub formation Among other...
... Trademarks Granted xvi Introduction As shown, there is a steady increase in trademark filing inthefoodindustry over the period from 1999 to 2006 Companies are increasingly investing in their brand and ... especially true inthe an industry where there are many competing products in other industries or the mark may be considered descriptive (such as thefood industry) Second, although the clearance ... references using search databases, including the Internet Following the examiner’s initial examination and search, the examiner will usually issue an objection to the application for failing to satisfy...
... began by learning about the history of the culinary industryinthe world and the current state of food & beverage industryin Vietnam 1.1 Research background 1.1.1 Theindustry of food and beverage ... each cuisine differ about the origin of food, spices, processing techniques, the side dishes, However, there are similarities inthe cuisines of the countries inthe world are valuing the sequence ... tile roofs combine antique decorative lighting, deep, luxurious dining room … giving a feeling of comfort, especially while enjoying the rich food "in the sky, inthe woods, inthe sea" come from...
... route to the disruptive innovation critically needed inthefoodindustry R&D intensity is a well-established indicator of industry innovation[21] The pharmaceutical and biotechnology industry ... to many independent monitoring schemes that include the Dow Jones Sustainability Index and the Global Reporting Initiative[29] Their reports to the investor and business community create incentives ... countries/regions, including the 27 countries of the European Union and the countries of the Cooperation Council for the Arab States of the Gulf, to allow industry to react according to the different...
... containing cleaning agents is discharged to the drain or further treated onsite In most cases, flow balancing and pH adjustment are performed inthe same balancing tank According to the International ... embarrassing and very costly All steps inthe dairy chain, including production, processing, packaging, transportation, storage, distribution, and marketing, impact the environment [2] Owing to the ... explanation without intent to infringe Library of Congress Cataloging -in- Publication Data Waste treatment inthefood processing industry / edited by Lawrence K Wang … [et al.] p cm Includes bibliographical...
... and maintained regularly Within the slaughtering area and cutting rooms, measures should be adopted to minimize meat scraps and fatty tissue entering the floor drains Once inthe drains these ... there are measures that can be taken to minimize wastewater generation and the aqueous pollution load Minimization can start inthe holding pens by reducing the time that the animals remain in ... they are intrinsic to the proper operation of the process Thein uent wastewater flows upward through a sludge blanket of these granules, which remain within the reactor as their settling velocity...
... by excavating the earth Hence, the ponding system is widely favored by the palm oil industry due to its marginal cost In constructing the ponds, the depth is crucial for determining the type of ... shells is then separated in a winnowing column using upwards suction (hydrocyclone) and a clay bath The third source of POME is the washing water of the hydrocyclone The kernel produced is then stored ... loading of 0.8 –1.0 BOD kg/m3 Á day compared to anaerobic ponds With minimal financial input from the operators, no mechanical mixing equipment is installed inthe digesters Using the same principle...
... of the pollution Tannins that come from the olive skin remain inthe wastewater from the olive oil mill Although tannins are not harmful to people, animals, or plants, they dye the water coming ... compounds) include the pharmaceutical industry, refineries, coal-processing plants, and food- stuff manufacturing The olive oil industry (a common activity in Mediterranean countries), in particular, ... calculations [40] The percentage of biological solids inthe aeration basin will also vary with the amount and nature of the industrial wastewater Increasing the sludge age increases the biomass percentage...
... Potato Chips The processing of potatoes to potato chips essentially involves the slicing of peeled potatoes, washing the slices in cool water, rinsing, partially drying, and frying them in fat or ... processing plant depends on the processing method, to a large extent In general, the following steps are applied in potato processing: washing the raw potatoes; peeling, which includes washing to ... reciprocating orbital or rocking motion, or a combination of both The wastewater is fed into the horizontal surface of the screen, and the water passing through the retained solids is bounced across the...
... performed on the soft drinks or their components inthe laboratories of the bottling plants After the soft drinks leave the manufacturing factory, they may be subjected to further testing by external ... unpacking machines remove the caps from the bottles, then cleaning machines wash the bottles repeatedly until they are thoroughly clean The cleaned bottles are examined by an inspection machine ... drinks The function of introducing acidity into soft drinks is to balance the sweetness and also to act as a preservative Its importance lies in making the soft drink fresh and thirst-quenching...
... higher than that of inthe chemical industry and inthe paper and textiles industry [3,6] Normally, half of the water is used inthe process, while the remainder is used for washing purposes (e.g., ... who were trained by the UNEP Working Group conducted a series of training programs for the remaining staff Finally, the staff was rewarded for their implementation of CP Cost-Saving Benefits Through ... nearby watercourse Owing to the poor nutrient content inthein uent, nutrient was fed directly into the aeration tank Not all the added nitrogen was consumed inthe treatment, thus the total Kjedahl...
... wastes including various minerals may not be appropriate for incineration 9.4.2 Vessels, Containers, and Wrapping Wastes Another type of waste relating to food industries is the waste originating ... Systems for Food Processing Different sources contribute to the generation of wastewater infood processing industries, including meat processing, dairy products, seafood and fish processing, fruits ... receiving toll is around 40,000 yen/t of BMP Since prion is a kind of protein, it must be decomposed at very high temperatures inthe kiln 9.5.3 Incineration Ash of Food Wastes Incineration is the...
... that they clean thefood handling equipment on a daily basis so the membranes inthefood processing lines must withstand daily cleaning However equipment inthe waste treatment side of the dairy ... for many years The dairy industry is one of the major utilisers of membrane technology within the foods industry, which started from the1 970s [1-3] The typical membrane separations include microfiltration ... drawback in DCMD due to the drop inthe theoretical driving force The temperature polarization coefficient (τ) is defined as the ratio between the actual driving force and the theoretical driving...
... larger inthe core The heat is exchanged from the heating channels inthe jacket, through the highly conductive jacket material, and into the core We can calculate the temperature profile by defining ... processor Finally, we will study the design of the bipolar plates and their influence on the ohmic losses inthe fuel cell stack All of the models shown inthe figures throughout the paper have ... inthe Automotive IndustryThe design of catalyst reactors has made the car engine substantially cleaner during the last two decades Car manufacturers have applied large efforts in reducing the...
... ARE THERE SANITATION NEEDS? The word sanitation is derived from the Latin “sanitas,” which means health Sanitation inthefoodindustry has been applied to the process of creating and maintaining ... to: (1) Wearing outer garments suitable to the operation in a manner that protects against the contamination of food, food- contact surfaces, or food- packaging materials (2) Maintaining adequate ... necessary for the production of safe foodFood handlers should receive (in the authors’ opinion, must receive) appropriate training in proper food handling techniques and food protection principles...
... become an integral part of the understanding what the market(s) is/are seeking Peak organisations inthe tourism industry recognise the need to encourage both new and repeat business The latter ... comparison between the efforts of the individual enterprise and those of theindustry as a whole Government agencies are now recognising the value of assessing the success of their programs in terms of ... be possible for individual sectors of theindustry to be compared with other sectors In an industry where the success of the whole depends on the contribution of each part, this information will...
... RISK-TAKING BEHAVIOUR AND OWNERSHIP INTHE BANKING INDUSTRY: THE SPANISH EVIDENCE Abstract: This paper analyses the determinants of risk-taking inthe Spanish financial intermediaries ... revealed inthe impact of the remaining variables Thus, increases in ROE have a significantly greater effect 15 on the level of risk-taking behaviour in Commercial banks than in Savings banks Indeed, ... have incentives to control the Savings banks in their regions to enhance the sustainability of certain adjustment policies The influence of these regional governments may weigh too heavily in certain...
... N-terminal FAD-binding domain facing the intermembrane space This topology would enable Gut2 to transfer of electrons to Nde1 inthe intermembrane space [32] Alo1 catalyses the final step in d-erythroascorbic ... proteins of the outer membrane, we set out to determine what proportion was integral and to identify the major protein species To determine whether the major outer membrane proteins were integral ... of the Om14 sequence that predicts two or three a-helical transmembrane segments, in support of the behavior of the protein in Triton X-114 The transmembrane segments A Integral proteins in the...