... new password: Password changed DLSwitch1> (enable) set enablepass Enter old password: (Because you not currently have a password, just hit enter) Enter new password: Retype new password: Password ... Enter new password: ( cisco hit enter) Retype new password: ( cisco hit enter) Password changed DLSwitch1> (enable) set enablepass Enter old password: (just hit enter) Enter new password: (“class” ... into the Catalyst switch You will not be able to get in because you not know the passwords The Catalyst 4000 series of switches deals with passwordrecovery much differently than the other Cisco...
... re-assign the passwords: ALSwitch(config)#enable password class ALSwitch(config)#line ALSwitch(config-line) #password cisco ALSwitch(config-line)#line vty 15 ALSwitch(config-line) #password cisco ALSwitch(config-line)#login ... Attempt to telnet into the Catalyst switch You will not be able to get in because you not know the passwords The Catalyst 2900 series of switches deals with passwordrecovery in a similar fashion ... default config, which has no passwords Once the switch is up and running, we get into enable mode, move the saved startup config into running config, modify the passwords and then move it back...
... unknown passwords as follows: ALSwitch#configure terminal ALSwitch(config)#no enable secret ALSwitch(config)#enable passwordCisco ALSwitch(config)#line console ALSwitch(config-line) #password cisco ... above port 1x goes off or when the diagnostic console is displayed Cisco Systems Diagnostic Console Copyright(c) Cisco Systems, Inc 1999 All rights reserved Ethernet Address: 00-E0-1E-7E-B4-40 ... The following logon screen will appear: Cisco Systems Diagnostic Console Copyright(c) Cisco Systems, Inc 1999 All rights reserved Ethernet Address: 00-E0-1E-7E-B4-40 ...
... unknown passwords as follows: ALSwitch#configure terminal ALSwitch(config)#no enable secret ALSwitch(config)#enable passwordCisco ALSwitch(config)#line console ALSwitch(config-line) #password cisco ... Copyright 2003, Cisco Systems, Inc 4 Release the Mode button one or two seconds after the LED above port 1x goes off Cisco Systems Diagnostic Console Copyright(c) Cisco Systems, Inc 1999 All rights ... before June 1997 , please refer to the Firmware Version 1.09 and Earlier section of this document, and contact the Cisco Technical Assistance Center (TAC) for passwordrecovery Clearing the Password...
... router(config-line) #password newpassword router(config)#line aux router(config-line)#login router(config-line) #password newpassword router(config)#line vty router(config-line)#login router(config-line) #password ... Enter a new privileged password and change other lost passwords as may be necessary router#config term router(config)#enable secret newpassword router(config)#enable password newpassword router(config)#line ... router(config-line) #password newpassword router(config)#line aux router(config-line)#login router(config-line) #password newpassword router(config)#line vty router(config-line)#login router(config-line)#password...
... Cards 131 Catalyst 8510 Line Cards 132 The Chassis 132 Catalyst 2900 Series 132 Catalyst 5002 Series 133 Catalyst5000 134 Catalyst 5505 135 Catalyst 5509 135 Catalyst 5500 136 Catalyst5000 Series ... Catalyst Switches 107 Catalyst 1900 108 Catalyst 2820 110 Catalyst 2900XL Series 111 Catalyst 3000 Series 113 Catalyst 3900 Series 114 Catalyst 4000 Series 115 Page vii Chapter The Catalyst5000 ... configuration options that are available for the Catalyst IOS Although I used the Catalyst5000 Series in writing this book, the Catalyst 4000 and 6000 series run the Catalyst IOS as well And many of the...
... router Attempt to logon to the router using the enable passwordcisco The output should look like the following: Router>enable Password: Password: Password: % Bad secrets Router> Step Document the ... Enter Privileged EXEC mode and change password a Now at the user mode prompt Router>, type enable and press Enter to go to the privileged mode without a password b Use the command copy startup-config ... privileged EXEC no password is needed c Type configure terminal to enter the global configuration mode d In the global configuration mode type enable secret class to change the secret password e While...
... router Attempt to logon to the router using the enable passwordcisco The output should look like the following: Router>enable Password: Password: Password: % Bad secrets Router> Step Document the ... Step Enter Privilege Exec mode and change password a Now at the user mode prompt Router>, type enable and press Enter to go to the privileged mode without a password b Use the command copy startup-config ... privileged exec no password is needed c Type configure terminal to enter the global configuration mode d In the global configuration mode type enable secret class to change the secret password e While...
... lại password mới: router#config term router(config)#enable secret newpassword router(config)#enable password newpassword router(config)#line router(config-line)#login router(config-line) #password ... router(config-line) #password newpassword router(config)#line aux router(config-line)#login router(config-line) #password newpassword router(config)#line vty router(config-line)#login router(config-line) #password newpassword ... Enter a new privileged password and change other lost passwords as may be necessary router#config term router(config)#enable secret newpassword router(config)#enable password newpassword router(config)#line...
... sulfat amôn xử lý bùn điện phân thu hồi bạc kim loại Sản phẩm dự án bao gồm: + 5000 chì/năm chất lượng 99, 99% + Bạc thỏi > 99% Ag: 7000 kg/năm + Phân đạm sunfat amôn loại I : 1500 tấn/năm Công nghệ ... luyện chì m Tấn 18000 5050 Tính quy 100%Pb Thực thu toàn điện phân chì % 99 15 Thực thu trực tiếp % 95 Sản phẩm > 99, 99% Pb Tấn 5000 Than Antraxit Tấn 0,1 500 Axit H2SiF6 Kg 4,8 24000 Gelatin Kg 0,4 ... PbSiF6, 120 - 130 g/l axit H2SiF6 Sơ đồ công nghệ điện phân tinh luyện chì thể hình đây: Chì loại I (99, 99% Pb) Điều chế Axit Than, quạt gió dung dịch H2SiF6,H2O điện phân Chì loại II (96,5% Pb) (chì...
... the catalyst solution remains fully functional to achieve an economic catalyst life 2.7.1 RECOVERY OF METAL VALUES FROM A SPENT CATALYST For the purposes of the following discussion, the catalyst ... the resin Recovery and/or Reactivation of Spent Catalysts Technologies are available for dealing with spent catalyst There are procedures for separating active catalyst from deactivated catalyst, ... potentially active catalyst from purge streams and the decomposition of active catalyst by the process of product recovery The first two can be alleviated to some extent by improvements in catalyst or...
... Systems Floor Plan Building A West Sunset Key Map 1cm = 10ft 1in = 10m Copyright Cisco Systems May be reprinted only for Cisco Academt ED McCarty - 2000 - 2002 ...
... password 070C285F4D064B Lệnh username name passwordpassword có đặc điểm tương tự lệnh enable secret Lệnh service password- encryption mã hóa tất mật liệt kê câu lệnh username name password password; ... “7” lệnh password có nghĩa giá trị theo sau mật mã hóa câu lệnh service password- encryption line password 05080F1C2243 login line vty password 00071A150754 login Chú ý lệnh service password- encryption ... lệnh no service password- encryption), mật không tự động giải mã, thay vào đó, Cisco IOS chờ mật bị thay đổI trước hiển thị dạng không mã hóa Chú ý thuật toán mã hóa dùng lệnh service password- encryption...