... establish standards of identity for meat and poultry products Under the FMIA and the PPIA, a product is “misbranded” if: It purports to be or is represented as a food for which a definition and standard ... conforms to such definition and standard, and (B) its label bears the name of the food specified in the definition and standard 68 A standard of identity prescribes a manner of preparation and ... the setting of standards of identity for food products 28 The FMIA and PPIA state that USDA’s standards for any meat and poultry food products may not be inconsistent with standards established...
... Added “Except for entries of tare,” before “the minimum length “ for clarity Deleted “Except for entries of tare,” for clarity Replaced “display” and “displayed” with “indicate” and “indicated” ... 20402-0001 Handbook 44 - 2007 Foreword Handbook 44 was first published in 1949, having been preceded by similar handbooks of various designations and in several forms, beginning in 1918 Handbook ... Replaced “display” and “displayed” with “indicate” and “indicated” Replaced “side” with “axis” in Minimumand Maximum Dimensions for Each Side: for clarity Added “(or each axis and range)” to the...
... Added “Except for entries of tare,” before “the minimum length “ for clarity Deleted “Except for entries of tare,” for clarity Replaced “display” and “displayed” with “indicate” and “indicated” ... 20402-0001 Handbook 44 - 2007 Foreword Handbook 44 was first published in 1949, having been preceded by similar handbooks of various designations and in several forms, beginning in 1918 Handbook ... Replaced “display” and “displayed” with “indicate” and “indicated” Replaced “side” with “axis” in Minimumand Maximum Dimensions for Each Side: for clarity Added “(or each axis and range)” to the...
... articles for distribution, for purchase, offered or submitted for sale, for distribution, purchase, or in computing any basic charge or payment for services rendered on the basis of weight, and in ... 2, or S.1.2.1 Weight Units - Except for postal scales, indicating and recording elements for shipping and postal applications, and scales used to print standard pack labels, a device shall indicate ... NIST Handbook 130, Uniform Laws and Regulations in the Area of Legal Metrology and Engine Fuel Quality, Interpretations and Guidelines, Paragraph 2.6.11 Good Quantity Control Practices 2-68 Handbook...
... used for calibration and weights and measures approval unless the meter is recalibrated with a different product and tested by a registered service agency or a weights and measures official and ... compensated and uncompensated volume for each delivery, the tests in (a) and (b) may be performed as a single test (Amended 1987) N.4.1.2 Repeatability Tests - Tests for repeatability should include a minimum ... Values - The maintenance and acceptance tolerances for normal and special tests shall be as shown in Table T.2 (Amended 2003) Table T.2 Accuracy Classes and Tolerances for LPG and Anhydrous Ammonia...
... test results shall not exceed 0.6 % for tests performed at the normal and intermediate flow rates, and 1.3 % for tests performed at the minimum flow rate, and each test shall be within the applicable ... weights and measures official T Tolerances T.1 Tolerance Values on Normal Tests and on Special Tests Other Than Low-Flame Tests - Maintenance and acceptance tolerances for normal and special tests for ... hydrogen, and argon (Amended 1986 and 1995) A.2 - This code does not apply to the following: (a) Devices used for dispensing liquefied petroleum gases (for which see Sec 3.32; Code for Liquefied...
... (Amended 1977, 1986, and 1988) S.1.3.1 Minimum Height of Figures, Words, and Symbols - The minimum height of the figures used to indicate the fare shall be 10 mm andfor extras, mm The minimum height ... 1996, and 2003) 5-27 5.56.(a) Grain Moisture Meters Handbook 44 - 2007 S.1.2 Grain or Seed Kind and Class Selection and Recording - Provision shall be made for selecting and recording the kind and ... listed in Table S.1.2 (Amended 1993 and 1995) Table S.1.2 Grain Types Considered for Type Evaluation and Calibration andMinimum Acceptable Abbreviations MinimumMinimum Acceptable Grain Type Grain...
... effect of the widespread enforcement of a single standard of design and performance The enforcement effort in each jurisdiction can then reinforce the enforcement effort in all other jurisdictions ... status and is not intended to be enforced The requirements are designed for study prior to the development and adoption of a final Code for Livestock, Meat, and Poultry Evaluation Systems and/ or ... Institute of Standards and Technology Handbook 105-Series standards (or other suitable and designated standards) This section shall not preclude the use of additional field standards and/ or equipment,...
... and tests set forth when such inspections and tests are deemed necessary to ensure that the material to conforms to the prescribed requirements 27.4 Sampling for Flattening and Flaring Test and ... acceptable Individual lengths that not conform to the test requirements may be resubmitted for test provided the reason for nonconformance is established and the nonconforming portion removed 18 Retreatment ... specified yield strength for ferritic alloy and stainless steel pipe, or 50 % of the specified minimum yield strength for austenitic alloy and stainless steel pipe andfor ferritic/austenitic...
... voted for; asked the voter about issues affecting his/her vote choice; and asked about the voter’s demographics including gender, age, and race The voter’s participation was voluntary and anonymous ... plaintiff the costs and disbursements of this action; d Award plaintiff reasonable attorney fees pursuant to 42 U.S.C §1988; and e Grant plaintiff such other relief as is equitable and proper [6] ... County of Franklin, and State of Ohio At all times material hereto, plaintiff was and is a registered voter, as shown in the records of the Franklin County (Ohio) Board of Elections, and was eligible...
... the decision; III.Identify your decision based on personal standards of honesty and fairness I and II II and III I and III I, II, and III Financial reports are used by management creditors investors ... respectively provide information to internal and external users are forensic accounting and financial accounting managerial accounting and financial accounting managerial accounting and environmental ... and Habitat for Humanity Denzel Jones’ personal records and Crystal Cleaning Denzel Jones’ personal records, Crystal Cleaning, and Habitat for Humanity Donner Company is selling a piece of land...
... n i bi n d ng Yờu c u thi cụng v nghi m thu Hydraulic structures - Joint deformation Requirementsfor construction and acceptance 1.1 Ph m vi ỏp d ng Tiờu chu n ny quy nh cỏc yờu c u v thi cụng ... V t li u xõy d ng d ng h t cú ng kớnh h t l n nh t khụng quỏ mm 3.4 V i lm c t (Textile fabric for framework) V t li u dựng lm c t ch t o cỏc t m ma tớt ỏt phan Cú th dựng v i s i ay, s i gai...
... knowledge,proficiency, and • Haveacompleteunderstandingoftheoperation and handling confidence,takeaboating safety course Tolocatelocalcourseofferings,or for moreinformationonrecreational boating and boating safety, contactyourstateboatingagency,U ... Otherwise,makesureitisreadilyaccessible Register Type of Message and Use 06 Inter-ship Safety: Used for ship-to-ship safety messages and searchmessages and for ships and aircraftofthe CoastGuard 09 Boater Calling: ... Pistol-launched and hand-heldparachuteflares and meteorshavemany characteristicsofafirearm and mustbehandledwithextremecaution Insomestates and Canadatheymaybeconsideredafirearmand...
... Version 2.0 October 2011 For more information on medicine safety, please visit: www.pfizer.com/medicinesafety Medication Safetyfor the Elderly: A Guide for Patients and Caregivers • • • Be honest ... Version 2.0 October 2011 For more information on medicine safety, please visit: www.pfizer.com/medicinesafety Medication Safetyfor the Elderly: A Guide for Patients and Caregivers Nonprescription ... the medicine (trade name and generic); how, when, andfor how long you should take it; any precautions or warnings about the medicine; side effects to watch out for, and what to if they occur...
... Radiation threats and your safety A guide to Preparation and REsponse for Professionals and Community Radiation threats and your safety A guide to Preparation and REsponse for Professionals and Community ... numerous guidance and planning documents, and some of that information keeps changing as new plans are drawn and new terminologies and acronyms are created Also, numerous fact sheets and information ... of radiation and radioactivity, at least for many, is formed by images of mushroom clouds, cinema and television dramatizations, and even cartoon characters The need for understanding radiation...
... responsible for the conformity of the machinery with the relevant essential health andsafetyrequirements He must affix the conformity mark on the machinery and draw up and sign the Declaration of Conformity ... machinery for foodstuffs and machinery for cosmetics and pharmaceutical products, portable hand-held and hand guided machinery, portable fixing and other impact machinery; - Section 3.6.3.1 and 3.6.3.2 ... HEALTH ANDSAFETYREQUIREMENTSFOR CERTIAN CATEGORIES OF MACHINERY Foodstuffs machinery, machinery for cosmetics or pharmaceutical products, hand-held and/ or handguided machinery, portable fixing and...