10/03 • 100571 600 mm Products 28 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 FL1000 Fiber Termination Products Two-Door Wall Mount Boxes 12-Position Termination/Splice Wall Box The FL1000 two-door, wall mount boxes feature a unique design and many integrated features such as: • Multiple, configurable locking options that allow users and service providers separate access for security • Acceptance of strength member tie-off hardware • Acceptance of cable clamps at each corner Grounding screws, mounting screws, and dust caps are included with each panel. More accessories are available on page 33. PNT0 PNT1 13.0" 3.6" 11.2" Swing-Out Door Tie Lance Splice Tray (Optional) Swing-Out Door Splice Deck Radius Limiter (4 Places) 6pak Adapter Plate (Optional With or Without Pigtails) Cable Clamp (Optional) Compression Fitting (Optional) Designation Label Cable Channel (Optional) Strength Member Tie-Off (Optional) 24-Position Termination/Splice Wall Box 17.0" 6.2" 17.7" Swing-Out Door Tie Lance Splice Tray (Optional) Swing-Out Door Splice Deck Radius Limiter (4 places) 6pak Adapter Plate (Optional With or Without Pigtails) Cable Clamp (Optional) Compression Fitting (Optional) Designation Label Strength Member Tie-Off (Optional) 48-Position Termination/Splice Wall Box 14.0" 3.6" 15.1" Swing-Out Door Tie Lance Splice Tray (Optional) Swing-Out Door Splice Deck Radius Limiter (4 Places) 6pak Adapter Plate (Optional With or Without Pigtails) Cable Clamp (Optional) Compression Fitting (Optional) Designation Label Cable Channel (Optional) Strength Member Tie-Off (Optional) 10/03 • 100571 600 mm Products 29 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 FL1000 Fiber Termination Products Two-Door Ordering Information FL1- __ __ __ __ __ __ __ __ - __ __ __ __ __ Wall Box Type G 2-door, 12-position termination/splice wall box H 2-door, 24-position termination/splice wall box J 2-door, 48-position termination/splice wall box Splice Tray with Chip 1 Bare fusion 2 Heat shrink fusion 3 Mechanical (elastomeric) 4 Rotary 6 FibrLok ® 7 Nortel QPAK N None Accessories 5 Cable clamp 6 Compression fittings 7 Bonding grounding kit 8 Strength member tie-off Locks A Two A keys B Two B keys C One A key, one B key D One A key E One B key N None 6paks not Installed into Wall Box (with or without Fiber) OR 1 Adapters with pigtails (2.0 mm x 3.0 m) 2 Adapters only N None/NA 6paks Installed into Wall Box (with or without Fiber)* 3 Adapters with pigtails preinstalled into wall box (2.0 mm x 3.0 m) 4 Adapters preinstalled into wall box Multimode and Singlemode 6pak Adapter/Connector Type Singlemode Multimode 0 Blank N None/NA 2 FC ultra polish 4ST ® ultra polish 7 SC ultra polish C SC duplex with zirconia sleeves E SC duplex F FC angled polish J SC angled polish K E-2000 angled polish L FC with zirconia sleeves PST ® with zirconia sleeves R SC with zirconia sleeves XLX.5 ® 8LC 5ST ® 9SC AFC D SC duplex YLX.5 ® 6LC 1 2 3A 3B 3C 3D 3E 4 5 6 7 8 9 Number of splice trays received depends on amount of 6paks used: 1-2 6paks = 1 splice tray 4 6paks = 2 splice trays 6 6paks = 3 splice trays 8 6paks = 4 splice trays *Use the guide above for placement of factory-installed 6paks. Place the desired connector or adapter type (from guide above) above the corresponding location designation of 3A, 3B, 3C, 3D or 3E. The diagram illustrates the location of each 6pak within the bulkhead. Enter the desired quantity (0-9) above the corresponding accessory. Numerous locking options are available for separate user and service provider access. Choose the combination appropriate for your securtiy needs. 3 E 3 D Wall-Mount Bulkhead Viewed from Equipment Side Mounting Wall Side Door Side 3 C 3 A 3 E 3 D 3 C 3 B How to order an FL1000 two-door wall mount box 1. Select wall box type 2. Select 6pak (with or without fiber) not installed in wall mount box (recommended for quicker availability) OR Select 6pak (with or without fiber) installed in wall mount box 3. Select 6pak adapter type (if factory installed, choose placement in the wall mount box 4. Select splice tray with chip 5. Select number of cable clamps (0-9) 6. Select number of compression fittings (0-9) 7. Select number of bonding grounding kits (0-9) 8. Select number of strength member tie-off kits (each wall box accepts 2, maximum) (0-9) 9. Select locks Catalog Number 10/03 • 100571 600 mm Products 30 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 FL1000 Fiber Termination Products Two-Door Wall Mount Boxes with MTRJ Connectors FL1- __ __ - 0 __ __ __ __ __ __ __ __ __ Box Size Catalog Number 12 12-position (24 fiber connections) 24 24-position (48 fiber connections) 36 36-position (72 fiber connections) 48 48-position (96 fiber connections) 72 72-position (144 fiber connections) 96 96-position (192 fiber connections) Type of Splice Tray 1 Bare fusion 2 Heat shrink 3 Mechanical 4 Rotary 6 Fibrlok ® 7 Nortel QPAK 8 Raychem N None** Locks N None A (2) key A B (2) key B C (1) key A, (1) key B D (1) key A E (1) key B Fiber Connections* 012 12 024 24 036 36 048 48 072 72 096 96 144 144 192 192 Adapter Style M MTRJ (pass through adapters only) S MTRJ workstation jack (putty) B MTRJ secure keyed jack (blue) G MTRJ secure keyed jack (green) H MTRJ secure keyed jack (yellow) W MTRJ secure keyed jack (red) 12 3456789101112 Accessories*** 8 Cable clamp 9 Compression fittings 10 Bonding/grounding 11 Strength member tie-off * Each position = 2 fiber connections (e.g., 24-position panel fully loaded with MTRJ = 48 fiber connections). ** For interconnect only applications; right side of box can be used as slack storage. *** Select number of each as needed. Qty 0-9. Dimensions H x W x D 12-position 15.5" x 20.0" x 4.1" 24-position 15.5" x 20.0" x 4.1" 36-position 23.0" x 22.2" x 5.5" 48-position 23.0" x 22.2" x 5.5" 72-position 23.0" x 22.2" x 7.0" 96-position 31.0" x 22.2" x 7.0" Features • Quick installation • Compact size • Durability • Single catalog number ordering • Wall boxes come preconfigured (6paks installed) • Two-door design allows for separate user/service provider access • Numerous locking options • Acceptance of strength member tie-off hardware • Acceptance of cable clamps or compression fittings at each corner • Slack storage on left, splicing or storage on right side of box • Available in putty 10/03 • 100571 600 mm Products 31 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 FL1000 Fiber Termination Products One-Door Wall Mount Boxes 12-Position Termination/Splice Wall Box The FL1000 one-door, wall mount boxes feature a unique design and many integrated features such as: • Numerous cable tie points within the panels • Ability to accept hasp-style locks • Acceptance of cable clamps at each corner Grounding screws, mounting screws, and dust caps are included with each panel. More accessories are available on page 33. 24-Position Termination/Splice Wall Box 48-Position Splice Wall Box 6pak Adapter Plate (Optional, With or Without Pigtails) Compression Fitting (Optional) Splice Tray Shown With Cover Removed (Optional) Swing-Out Door Designation Label Tie Lance Grounding Kit Mounting Holes Radius Limiter (4 Places) Splice Deck Cable Clamp 19.8" 1.0" 3.58" (9.1 cm) 1.2" 12.0" 7.8" 10.2" (25.96 cm) 15" (38.1 cm) 6pak Adapter Plate (Optional, With or Without Pigtails) Cable Clamp Compression Fitting (Optional) Splice Tray Shown With Cover Removed (Optional) Swing-Out Door Designation Label Tie Lance Radius Limiter (4 Places) Splice Deck Grounding Kit Mounting Holes 21.4" 3.58" (9.1 cm) 1.2" 13.0" 8.4" Compression Fitting (Optional) Splice Tray Shown With Cover Removed (Optional) Swing-Out Door Designation Label Tie Lance Radius Limiter (4 Places) Splice Deck Cable Clamp 15" (38.1 cm) Grounding Kit Mounting Holes 21.4" 1.0" 3.58" (9.1 cm) 1.2" 13.0" 8.4" 10/03 • 100571 600 mm Products 32 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 FL1000 Fiber Termination Products One-Door Ordering Information Wall Box Type A 1-door, 12-position termination/splice wall box B 1-door, 24-position termination/splice wall box C 1-door, 48-position splice-only wall box Splice Tray with Chip 1 Bare fusion 2 Heat shrink fusion 3 Mechanical (elastomeric) 4 Rotary 6 FibrLok ® 7 Nortel QPAK N None Accessories 5 Cable clamp 6 Compression fittings 7 Bonding grounding kit 6paks not Installed into Wall Box (with or without Fiber) OR 1 Adapters with pigtails (2.0 mm x 3.0 m) 2 Adapters only N None/NA 6paks Installed into Wall Box (with or without Fiber)* 3 Adapters with pigtails preinstalled into wall box (2.0 mm x 3.0 m) 4 Adapters preinstalled into wall box Multimode and Singlemode 6pak Adapter/Connector Type Singlemode Multimode 0 Blank N None/NA 2 FC ultra polish 4ST ® ultra polish 7 SC ultra polish C SC duplex with zirconia sleeves** E SC duplex** F FC angled polish J SC angled polish K E-2000 angled polish L FC with zirconia sleeves PST ® with zirconia sleeves R SC with zirconia sleeves XLX.5 ® 8LC 5ST ® 9SC D SC duplex** AFC YLX.5 ® 6LC How to order an FL1000 one-door wall mount box 1. Select wall box type 2. Select 6pak (with or without fiber) not installed in wall mount box OR Select 6pak (with or without fiber) installed in wall mount box 3. Select 6pak adapter type (if factory installed, choose placement in the wall mount box) 4. Select splice tray with chip 5. Select number of cable clamps (0-9) 6. Select number of compression fittings (0-9) 7. Select number of bonding grounding kits (0-9) 1 2 3A 3B 3C 3D 4 5 6 7 8 Number of splice trays received depends on amount of 6paks used: 1-2 6paks = 1 splice tray 3-4 6paks = 2 splice trays Wall Box Type C = 4 splice trays *Use the guide to the right for placement of factory-installed 6paks. Place the desired connector or adapter type (from guide above) above the corresponding location designation of 3A, 3B, 3C or 3D. The diagram illustrates the location of each 6pak within the bulkhead. **Requires zip cable Enter the desired quantity (0-9) above the corresponding accessory. 3 C 3 A Wall-Mount Bulkhead idf Mounting Wall Side Door Side 3 D 3 B Catalog Number FL1- __ __ __ __ __ __ N N __ - __ __ __ 10/03 • 100571 600 mm Products 33 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 FL1000 Fiber Termination Products FL2-6PMMSC FL2-6PMMDSC FL2-6PMMST FL2-6PMMFC FL2-6PMMLX FL2-6PMMLC FL2-6PSMSC FL2-6PSMDSC FL2-6PSMST FL2-6PSMFC FL2-6PSMSC-Z FL2-6PSMDSC-Z FL2-6PSMST-Z FL2-6PSMFC-Z FL2-6PSMASC FL2-6PSMAFC FL2-6PSMAE2 FL2-6PSMALX FL2-6PSMLC SC Duplex SC ST ® FC LX.5 ® LC SC Duplex SC ST ® FC SC (with zirconia sleeve) Duplex SC (with zirconia sleeve) ST ® (with zirconia sleeve) FC (with zirconia sleeve) SC angled 8° FC angled 8° E-2000 angled 8° LX.5 ® LC Multimode Catalog Number (62.5/125) 6paks without fiber FL1-6P9BC003 FL1-6PDBC003 FL1-6P5BC003 FL1-6PABC003 FL1-6PYBC003 FL1-6P6BC003 FL1-6P7SC003 FL1-6PESC003 FL1-6P4SC003 FL1-6P2SC003 FL1-6PRSC003 FL1-6PCSC003 FL1-6PPSC003 FL1-6PLSC003 FL1-6PJSC003 FL1-6PFSC003 FL1-6PKSC003 FL1-6PXBC003 FL1-6P8SC003 SC Duplex SC ST ® FC LX.5 ® LC SC Duplex SC ST ® FC SC (with zirconia sleeve) Duplex SC (with zirconia sleeve) ST ® (with zirconia sleeve) FC (with zirconia sleeve) SC angled 8° FC angled 8° E-2000 angled 8° LX.5 ® LC Multimode Catalog Number (62.5/125) 6paks with fiber Singlemode Singlemode Flexibility for future growth: To add capacity to an existing FL1000 panel, simply order the appropriate 6pak. 6pak Adapter Packs Accessories 6pak without fiber 6pak with fiber Description Compression fitting Radius limiters (set of 2 for use with rack mount panels) Strength member tie-off kit NEMA box access tool Cable clamp Bonding grounding kit Lock and Key Type A Lock and Key Type B Mini-splice trays (used only in 12-position, wall mount box) Bare fusion Heat shrink fusion Rotary FibrLok ® Northern Telecom QPAK Standard splice trays Bare fusion Heat shrink fusion Mechanical (Elastomeric) Rotary FibrLok ® Northern Telecom QPAK Raychem universal chip Catalog Number FL1-ACC001 FL1-ACC002 FL1-ACC003 ACE/AGX-KEY FL2-ACC007 FL2-ACC006 IPA-K1 IPA-K2 FL1-M-FT FL1-M-HS FL1-M-RT FL1-M-3M FL1-M-NT FST-FT FST-HS FST-MT FST-RT FST-3M FST-NT FST-RCM Ordering Information 10/03 • 100571 600 mm Products 34 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 FL2000 System Introduction Single Fiber Access Swing-out Bulkhead Allows Full Access The FL2000 System is a flexible, modular and economical series of fiber products designed for mounting into ETSI cabinets with either 19" or ETSI mounting. FL2000 Rack Mount Termination Panel (Empty) FL2000 Rack Mount Termination Panel with IFC FL2000 Rack Mount Termination/Splice Panel (Empty) 6pak Adapter Packs Features • A complete line of modular panels and boxes, developed for cabinet, rack and wall mounting. • Fully adaptable for large or small main distribution frame (MDF), intermediate distribution frame (IDF) or telephone closet (TC) applications. • Designed for 19-inch (48.26 cm) EIA rack or cabinet environment found in many enterprise networks; optional brackets are available to accommodate ETSI rack or cabinet mounting. • Provides termination, splicing and storage capabilities for in-building cables, outside plant cables and fiber optic terminal (FOT) equipment patch cords. • Modular design offers maximum flexibility to satisfy both current needs and future growth requirements. • A full line of options and accessories ensures compatibility with existing optical equipment. • FL2000 systems accommodate Value-Added Modules, adding flexibility and functionality to the optical transport systems. Splitters, wavelength division multiplexers (WDMs) and other optical components can be easily incorporated. • All FL2000 panels and boxes accommodate the modular FL2000 6pak plug-ins. 6paks are available in all connector styles and can be ordered as needed. • ADC’s patented removable angled retainers allow easy access for single fiber maintenance. • FL2000 panels and boxes feature superior vertical cable protection and management. • Rack mount panels are hinged on one side, allowing full access to the rear of the front plate and the interior of the panel. • Rack mount panels are equipped with mounting brackets to provide 12.7cm (5-inch) recess mounting; mounting brackets are available for virtually any mounting application. • Rack mount panels can be wall mounted. • The new FL2000 splice wheel allows easy roll-up of pigtail and buffer tube lengths and superior bend radius protection. • The FL2000 splice deck is available to complete existing installations. 10/03 • 100571 600 mm Products 35 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Features • Available with factory-installed multifiber intrafacility cable (IFC) or OSP cable • Panels with multifiber cable attached ship as a single unit with cable clamp installed • Panels come equipped with customer specified number of adapters, retainers, connectors, cable type and cable length • Panels with multifiber cable attached save costly installation time • Simplifies ordering process by allowing one part number for the panel, adapters, connectors and cable • Multiple mounting styles available Fiber Panel Data • Termination • Preloaded with multifiber cable FL2000 Rack or Cabinet Mount Panels Preconfigured Termination Panels with Multifiber Cable Ordering information appears on next page. 10/03 • 100571 600 mm Products 36 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 36 FL2000 Rack or Cabinet Mount Panels Preconfigured Termination Panels with Multifiber Cable SC Duplex SC ST ® LX.5 ®1 LC 1 Ultra PCFC FC with zirconia adapter FC 8° angled polish Ultra PCSC SC with zirconia adapter SC 8° angled polish Duplex SC Ultra PCST ST ® with zirconia adapter E-2000 8° angled polish LX.5 ®1 LC 1 FC Hybrid (FC connector on front; SC connector on back of bulkhead) ST ® Hybrid (ST ® connector on front; SC connector on back of bulkhead) S M Singlemode Multimode Panel Type 1 2 3 4 7 9 12-position 1.75" (4.45cm) (1RU) 24-position 3.5" (8.89 cm) (2RU) 36-position 5.25" (13.34 cm) (3RU) 48-position 5.25" (13.34 cm) (3RU) 72-position 8.75" (22.23 cm) (5RU) 96-position 10.5" (26.67 cm) (6RU) Nominal Capacity Panel Height Multimode 9 D 5 Y 6 Singlemode 2 L F 7 N J E 4 P K X 8 1 3 Connector Style 1 2 3 4 7 9 A Z Y X W 12 24 36 48 72 96 144 2 x 12 2 x 24 2 x 36 2 x 48 Cable Size Multimode C Singlemode A F G H J K M T L IFC stranded 62.5/125 IFC stranded riser-rated Plenum stranded OSP single armor stranded Indoor-outdoor stranded OSP dielectric stranded IFC stranded Maxi-Strip IFC ribbon riser-rated OSP dielectric ribbon OSP armored ribbon Cable Type XXX Cable length (meters) Length in Meters A B C D E F H 19" (48.26 cm) standard (19.6" [49.78 cm] overall) 19" (48.26 cm) maximum (19" [48.26 cm] overall) 19" (48.26 cm) flush mount 23" (58.42 cm) centered 23" (58.42 cm) with oversized VCG ETSI flush mount 600 mm Mounting Style 2 U D Up Down Cable Exit Direction FL2 - __ __ __ __ __ __ __ __ __ - __ __ __ __ Catalog Number 0 0 1 LX.5 ® and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter. 2 Mounting kit shipped unattached, if other than standard mounting style. 0 1 2 5 6 Standard Hole Plug Screwdriver K1 Lock K2 Lock Latch Type Please see pages 49-51 for mounting instructions. 10/03 • 100571 600 mm Products 37 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 37 FL2000 Rack or Cabinet Mount Panels Preconfigured Termination Panels with Pigtails R Termination only Panel Type 1 2 3 4 7 9 12-position 1.75" (4.45 cm) (1U) 24-position 3.5" (8.89 cm) (2U) 36-position 5.25" (13.34 cm) (3U) 48-position 5.25" (13.34 cm) (3U) 72-position 8.75" (22.23 cm) (5U) 96-position 10.5" (26.67 cm) (6U) Nominal Capacity Panel Height 1 LX.5 ® and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter. 2 For use with LX.5 ® and LC. 3 Mounting kit shipped unattached, if other than standard mounting style. FL2 - Catalog Number 123 000- 4 5 6 7 8 9 10 11 A P H R K Y Adapters only 6-fiber softwall bundle 6-fiber Maxi-Strip 12-fiber ribbon 12-fiber softwall bundle 2 12-fiber Maxi-Strip 2 0 1 2 5 6 Latch Hole plug Screwdriver K1 lock K2 lock Latch Type 12 Pigtail or Adapter Type Number of Ports Loaded A B C D E F H 19" (48.26 cm) standard (19.6" [49.78 cm] overall) 19" (48.26 cm) maximum (19" [48.26 cm] overall) 19" (48.26 cm) flush mount 23" (58.42 cm) centered 23" (58.42 cm) with oversized VCG ETSI flush mount 600 mm Mounting Style 3 0 SC Duplex SC ST ® LX.5 ®1 LC 1 Ultra PCFC FC with zirconia adapter FC 8° angled polish Ultra PCSC SC with zirconia adapter SC 8° angled polish Duplex SC Ultra PCST ST ® with zirconia adapter E-2000 8° angled polish LX.5 ®1 LC 1 FC hybrid (FC connector on front; SC connector on back of bulkhead) ST ® hybrid (ST ® connector on front; SC connector on back of bulkhead) Multimode 9 D 5 Y 6 Singlemode 2 L F 7 N J E 4 P K X 8 1 3 Connector Style 4.95" (12.58 cm) 10.14" (25.76 cm) 19.60" (49.79 cm) 5.25" (13.34 cm) [...]... 4.95" (12.58 cm) Fiber Panel Data 5.25" (13.34 cm) • Fiber capacity*: 12, 24, 36, 48, 72 & 96 • Termination • Pigtail storage *All panels can double capacity with LX.5® adapters Ordering Information • Panel Height Rack or cabinet mount termination panel Includes vertical cable management trough 12 -fiber capacity 24 -fiber capacity 36 -fiber capacity 48 -fiber capacity 72 -fiber capacity 96 -fiber capacity... lock 6 K2 lock Mounting Style A 19" standard (19.6" overall) B 19" maximum (19.0" overall) C 19" flush mount D 23" centered E 23" oversized VCG +32-2-712-65-42 39 FL2000 Rack or Cabinet Mount Panels Empty Termination Panels Features 1.75" (4.45 cm) 600 mm Products • Mounting - 19-inch (48.26 cm) EIA rack or cabinets, standard 12.7 cm ( 5") recess - Wall mounting option available - Other mounting kits... Adapters only 6 -fiber softwall bundle 6 -fiber Maxi-Strip 12 -fiber ribbon 12 -fiber softwall bundle 2 12 -fiber MaxiStrip2 Number of Cable Clamps 0 2 Splice Type 1 2 3 7 8 None or N/A Mechanical (wheel) Heat shrink fusion (wheel) Bare fusion (deck) Heat shrink fusion (deck) Mechanical (deck) Raychem universal (deck) Nortel (deck) B C D E F H 1 2 3 Splice Type2 M N 1 clamp (standard) 2 clamps Mounting Style3... panel and wall mount box products • Saves installation time FL2000 6pak with SC adapters and pigtails Multimode Pigtails and Adapters Catalog Number B C 6 FL2 - 6P Multimode Connector Style 5 ST® 9 SC A FC D Duplex SC Y LX.5®1 6 LC1 Length (in meters) 3 m (9.84') pigtail 03W for wall mount boxes 5 m (16.4') pigtail 05R for rack mount panels 1 LX.5® and LC 6paks are loaded with 12 fiber pigtails... 10/03 Accessories Wall mount bracket Needed for 12 fiber capacity panel only FL2-12RPNL FL2-24RPNL FL2-36RPNL FL2-48RPNL FL2-72RPNL FL2-96RPNL 24 -Fiber Capacity FL2-ACC008 72 -Fiber Capacity Cable clamp kit One per cable recommended Outer diameter 2" to 8" Outer diameter 7" to 1.0" Cable clamp kit for 12 fiber capacity panel only FL2-ACC007 FL2-ACC021 FL2-ACC033 Bonding/grounding kit For mounting kits and... flush mount 23" (58.42 cm) centered 23" (58.42 cm) with oversized VCG ETSI flush mount 600 mm LX.5® and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter For use with LX.5® and LC Mounting kit shipped unattached if other than standard mounting style Mechanical (wheel) Nortel (wheel) +32-2-712-65-00 • +32-2-712-65-42 38 FL2000 Rack Mount Panels Termination. .. +32-2-712-65-42 42 FL2000 Slack Storage Solutions Fiber Storage Disk 10.14" (25.76 cm) Features 600 mm Products • Provides jumper storage for 3 mm patch cords – one patch cord per disk • Stores 3.8 meters (12.5') of patch cord in each disk 19.60" (49.79 cm) 4.95" (12.58 cm) 5.25" (13.34 cm) Fiber Panel Data ROTATE TO REMOVE SLACK • Patch cord storage • Rack/cabinet mount • Wall mount Ordering Information Description... Number 5.25" x 19" x 10.19" (13.34 x 48.26 x 25.81 cm) FL2-CST60525 Fiber Storage Tray 6 trays www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 43 FL2000 Slack Storage Solutions Storage Deck Panel 10/03 • 100571 600 mm Products Features 10.14" (25.76 cm) • Mounts with FL2000 termination panels to provide jumper storage • Wall, rack, or cabinet mount • Utilizes unique storage decks for patch cord storage •... panel for 600 mm centered mounting FL2-HZSTORE-600 Horizontal interbay management panel for flush mounting FL2-HZSTORE-FLMT Wall bracket for wall mounting FL2-HZSTORE-WMNT www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 44 FL2000 6pak Adapter Packs • Completely interchangeable between FL2000 panel and wall box products • Can be ordered with all standard types of simplex and duplex single and multimode adapters... • Offers combination of splicing protection and associated fiber/ pigtail storage • Splice panel can be mounted in conjunction with any FL2000 termination panel or as a stand-alone splice panel • Occupies same footprint and offers same mounting options as FL2000 termination panels • Accepts the new ADC splice wheel for efficient management of fiber cable and splice protection • Accepts the traditional . 100571 600 mm Products 28 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 FL1000 Fiber Termination Products Two-Door Wall Mount Boxes 12-Position Termination/ Splice. 100571 600 mm Products 31 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 FL1000 Fiber Termination Products One-Door Wall Mount Boxes 12-Position Termination/ Splice