These are the first 71 CCIE Labs from www.ccprep.com's Lab FastTrack. Enjoy! Welcome, Sebastion! To access subscriber questions, select blue button on left. To update profile, please go to My Account . Lab FastTrack 01 |02|03|04 05|06|07|08 09|10|11|12 13|14|15|16 17|18|19|20 21|22|23|24 25|26|27|28 29|30|31|32 33|34|35|36 37|38|39|40 41|42|43|44 45|46|47|48 49|50|51|52 53|54|55|56 57|58|59|60 61|62|63|64 65|66|67|68 69|70|71 Welcome to the Lab FastTrack As a subscriber, you now have access to practice labs. If you have any specific questions about a lab, please email us at the following address: labs@ccprep.com . Lab 01 - Trouble-Shooting Lab 02 - Policy Routing Lab 03 - Frame Relay & IPX Tunneling (GRE) Lab 04 - Time Protocol Lab 05 - Frame Relay & AppleTalk Tunneling (Cayman) Lab 06 - Password Recovery Trouble-Shooting Lab 07 - ISDN Lab 08 - NAT Translation Lab 09 - Frame Relay Lab 10 - BGP Trouble-Shooting Lab 11 - IP Access Lists Lab 12 - Configure IPX Lab 13 - Fast EtherChannel between Catalyst 5000 Switches Lab 14 - Virtual Link Lab Lab 15 - Trouble-Shooting Lab 16 - Trouble-Shooting Lab 17 - Trouble-Shooting Lab 18 - ISDN Trouble-Shooting Lab 19 - BGP External and Internal Lab 20 - X-25 Lab Lab 21 - HSRP Lab 22 - Trouble-Shooting Lab 23 - IP DHCP Server Lab 24 - Trouble-Shooting Lab 25 - AppleTalk Trouble-Shooting Lab 26 - Lost IOS Trouble-Shooting Lab 27 - DLSw+ Translation between Ethernet & Token Ring Lab 28 - AppleTalk Lab 29 - Floating Static Route Lab 30 - Bridging Lab 31 - Trouble-Shooting Lab 32 - OSPF Lab 33 - Cisco's Network Address Translation with Overload Lab 34 - Configuring DECnet Lab 35 - Trouble-Shooting Lab 36 - Variable Length Subnet Masking (VLSM) Lab 37 - IGRP Load Balancing Lab 38 - Trouble-Shooting Lab 39 - Trouble-Shooting Lab 40 - Reverse Telnet Lab 41 - Configuring Multiple Routing Protocols Lab 42 - Trouble-Shooting Lab 43 - Configure AppleTalk Lab 44 - Network Address Translation and Extended Access-Lists Lab 45 - Queuing Lab 46 - Queuing Lab 47 - Multicasting Lab 48 - Traffic Shaping Lab 49 - ISDN LAB (Caller ID) Lab 50 - ISDN LAB Lab 51 - Tacacs Lab Lab 52 - Stun Lab Lab 53 - Protocol Translation - X.25/TCP 1 of 2 09/04/00 14:20 CCPrep.com - Lab FastTrack Lab 54 - Trouble-Shooting Lab 55 - Trouble-Shooting Lab 56 - AppleTalk Configuration Lab 57 - AppleTalk Configuration Lab 58 - OSPF over Frame-relay LAB Lab 59 - Using Your AUX Port as a DDR Interface Lab 60 - RIPv2/OSPF Redistribution LAB Lab 61 - Using Route-Map Statements to Redirect Traffic Lab 62 - Locating Network Devices Without a Topology Map Lab 63 - Changing Update and Hold Down Timers for EIGRP Lab 64 - Setting up a router as a frame-relay switch Lab 65 - Integrated Routing and Bridging Lab 66 - Configuring Dec and performing LAT translation to TCP Lab 67 - Frame-relay traffic-shaping Lab 68 - Configuring a Cisco router to provide dial-in access Lab 69 - Troubleshooting OSPF Lab 70 - UDP Flooding Lab 71 - Gateway redundancy Copyright © 1998-2000 CCPrep.com. All rights reserved. Do not duplicate or redistribute in any form. Home | Logon | Support | Advertise 2 of 2 09/04/00 14:20 CCPrep.com - Lab FastTrack file:///C|/cdrw/Geninfo CD/cisco/ccie/CCPrep Labs/Lab FastTrack.htm Welcome, Sebastion! To access subscriber questions, select blue button on left. To update profile, please go to My Account . Lab FastTrack 01 |02|03|04 05|06|07|08 09|10|11|12 13|14|15|16 17|18|19|20 21|22|23|24 25|26|27|28 29|30|31|32 33|34|35|36 37|38|39|40 41|42|43|44 45|46|47|48 49|50|51|52 53|54|55|56 57|58|59|60 61|62|63|64 65|66|67|68 69|70|71 Lab FastTrack For information on question codes, please refer to the Code Key . Lab 01- Trouble-Shooting Everything was fine before lunch: Router_A Router_A#sh run Building configuration . Current configuration: ! version 11.2 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname Router_A ! interface Ethernet0 ip address 172.16.4.17 255.255.255.240 ! interface Ethernet1 no ip address shutdown ! interface Serial0 ip address 10.16.0.5 255.255.255.252 no fair-queue ! interface Serial1 ip address 10.16.1.5 255.255.255.252 ip rip authentication mode 0 ! router ospf 100 network 10.16.0.0 0.0.0.255 area 0 network 10.16.1.0 0.0.0.255 area 1 area 1 virtual-link 10.16.1.6 . message-digest-key 10 md5 Router_C ! no ip classless ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 login ! end Router_A#sh ip ospf vir Router_A#sh ip ospf virtual-links Virtual Link OSPF_VL0 to router 10.16.1.6 is up Run as demand circuit DoNotAge LSA allowed. Transit area 1, via interface Serial1, . Cost of using 64 Transmit Delay is 1 sec, State POINT_TO_POINT, Timer intervals configured, Hello 10, Dead 40, . Wait 40, Retransmit 5 Hello due in 00:00:02 Adjacency State FULL (Hello suppressed) Router_A#sh ip ospf vir Router_A#sh ip ospf virtual-links Virtual Link OSPF_VL0 to router 10.16.1.6 is down Run as demand circuit DoNotAge LSA allowed. 1 of 3 04/04/00 12:55 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs/lab01.asp Transit area 1, Cost of using 65535 Transmit Delay is 1 sec, State DOWN, Timer intervals configured, Hello 10, Dead 40, . Wait 40, Retransmit 5 Router_C Router_C#sh run Building configuration . Current configuration: ! version 11.3 no service password-encryption ! hostname Router_C ! interface Ethernet0 no ip address shutdown ! interface Serial0 ip address 10.16.1.6 255.255.255.252 no ip mroute-cache no fair-queue clockrate 56000 ! interface Serial1 ip address 10.16.2.6 255.255.255.252 clockrate 56000 ! router ospf 100 network 10.16.2.0 0.0.0.255 area 2 network 10.16.1.0 0.0.0.255 area 1 area 1 virtual-link 10.16.1.5 . message-digest-key 10 md5 Router_A ! ip classless ! line con 0 line 1 8 line aux 0 line vty 0 4 ! end After lunch you have noticed a problem: Router_A#sh ip ospf vir Router_A#sh ip ospf virtual-links Virtual Link OSPF_VL0 to router 10.16.1.6 is down Run as demand circuit DoNotAge LSA allowed. Transit area 1, Cost of using 65535 Transmit Delay is 1 sec, State DOWN, Timer intervals configured, Hello 10, . Dead 40, Wait 40, Retransmit 5 After which, you check the configurations of both routers and discover that NO changes have been made! What is the problem? How did it happen? Solution: The virtual Link of Router_C does not use the correct Router ID. The Router ID of Router_A is 172.16.4.17 Why was the virtual link UP before lunch? The router ID, by default, will be the highest IP address configured. Before lunch Router_A had an ID that was NOT the highest IP address, in this case it must be that the Ethernet interface of Router_A was configured at a later time. OSPF will not change the Router ID 2 of 3 04/04/00 12:55 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs/lab01.asp once an ID has been established. While you were at lunch you router was rebooted which changed the Router ID. Copyright © 1998-2000 CCPrep.com. All rights reserved. Do not duplicate or redistribute in any form. Home | Logon | Support | Advertise 3 of 3 04/04/00 12:55 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs/lab01.asp Welcome, Sebastion! To access subscriber questions, select blue button on left. To update profile, please go to My Account . Lab FastTrack 01 |02|03|04 05|06|07|08 09|10|11|12 13|14|15|16 17|18|19|20 21|22|23|24 25|26|27|28 29|30|31|32 33|34|35|36 37|38|39|40 41|42|43|44 45|46|47|48 49|50|51|52 53|54|55|56 57|58|59|60 61|62|63|64 65|66|67|68 69|70|71 Lab FastTrack For information on question codes, refer to the Code Key . Lab 02 - Policy Routing The following scenario refers to the diagram below. Scenario: All routers are configured in a single OSPF area. Router_C, based on the cost metric for OSPF will send all packets with a destination network address of 10.4.0.0 out the E0 interface. Problem: Have all packets destined for network 10.4.0.0 exit the Serial 0 Router_C. Router_C#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP, D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP, i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default, U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/16 is subnetted, 3 subnets C 10.2.0.0 is directly connected, Serial0 C 10.3.0.0 is directly connected, Ethernet0 O 10.4.0.0 [110/74] via 10.3.0.1, 00:00:13, Ethernet0 Solution: Policy routing will allow you to configure a route map. The route map 1 of 3 04/04/00 12:57 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs/lab02.asp will be used by the router in lieu of destination routing. In this scenario the best route to the destination network 10.4.0.0 is to go ethernet. We want to force the route to take the serial connection. Step 1 Configure a route map tag. I chose "takeserial". Step 2 Point the route map to the tag. Don’t let the 10 shake you it is just a sequence number. Router_C(config)#route-map takeserial permit ? <0-65535> Sequence to insert to/delete from existing route-map entry Step 3 Identify which packet should be route mapped. In our example we will match the ip address of access list 1. Step 4 Tell the router where to send the matched packet. We will send the packets to Serial 0. Current configuration: ! version 11.2 ! hostname Router_C ! ! ! interface Ethernet0 ip address 10.3.0.3 255.255.0.0 ! interface Ethernet1 ip address 10.1.0.3 255.255.0.0 ip policy route-map takeserial*Step 1 ! interface Serial0 ip address 10.2.0.1 255.255.0.0 clockrate 38400 ! interface Serial1 no ip address shutdown ! router ospf 100 network 10.0.0.0 0.255.255.255 area 0 ! no ip classless access-list 1 permit 10.1.0.5 route-map takeserial permit 10 *Step 2 match ip address 1 *Step 3 set interface Serial0 *Step 4 ! line con 0 line aux 0 line vty 0 4 login ! end Now we will ping 10.4.0.2 from Workstaton A: Router_C#debug ip policy Policy routing debugging is on Router_C# IP: s=10.1.0.5 (Ethernet1), d=10.4.0.2, len 74, policy match IP: route map takeserial, item 10, permit IP: s=10.1.0.5 (Ethernet1), d=10.4.0.2 (Serial0), 2 of 3 04/04/00 12:57 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs/lab02.asp len 74, policy routed IP: Ethernet1 to Serial0 10.4.0.2 IP: s=10.1.0.5 (Ethernet1), d=10.4.0.2, len 74, policy match IP: route map takeserial, item 10, permit IP: s=10.1.0.5 (Ethernet1), d=10.4.0.2 (Serial0), len 74, policy routed IP: Ethernet1 to Serial0 10.4.0.2 IP: s=10.1.0.5 (Ethernet1), d=10.4.0.2, len 74, policy match IP: route map takeserial, item 10, permit IP: s=10.1.0.5 (Ethernet1), d=10.4.0.2 (Serial0), len 74, policy routed IP: Ethernet1 to Serial0 10.4.0.2 IP: s=10.1.0.5 (Ethernet1), d=10.4.0.2, len 74, policy match IP: route map takeserial, item 10, permit IP: s=10.1.0.5 (Ethernet1), d=10.4.0.2 (Serial0), len 74, policy routed IP: Ethernet1 to Serial0 10.4.0.2 Copyright © 1998-2000 CCPrep.com. All rights reserved. Do not duplicate or redistribute in any form. Home | Logon | Support | Advertise 3 of 3 04/04/00 12:57 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs/lab02.asp Welcome, Sebastion! To access subscriber questions, select blue button on left. To update profile, please go to My Account . Lab FastTrack 01 |02|03|04 05|06|07|08 09|10|11|12 13|14|15|16 17|18|19|20 21|22|23|24 25|26|27|28 29|30|31|32 33|34|35|36 37|38|39|40 41|42|43|44 45|46|47|48 49|50|51|52 53|54|55|56 57|58|59|60 61|62|63|64 65|66|67|68 69|70|71 Lab FastTrack For information on question codes, please refer to the Code Key . Lab 03 - Frame Relay and IPX Tunneling (GRE) Scenario: Given the following diagram, configure IPX on the Ethernet links of Router_A and Router_C only. Provide full connectivity using Router_B as a frame relay switch. Solution: Router_B hostname Router_B enable secret 5 . $1$eZ3D$vnTjKaCLtbSCcMF1mGzZm0 enable password ccnaprep ! frame-relay switching isdn switch-type ntt ! interface Serial0 no ip address no ip mroute-cache shutdown no fair-queue clockrate 4000000 ! interface Serial1 encapsulation frame-relay no ip mroute-cache keepalive 15 clockrate 2000000 frame-relay lmi-type cisco frame-relay intf-type dce frame-relay route 100 interface Serial2 . 200 ! interface Serial2 encapsulation frame-relay frame-relay lmi-type ansi no ip mroute-cache keepalive 15 clockrate 115200 frame-relay intf-type dce 1 of 3 04/04/00 12:57 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs/lab03.asp frame-relay route 200 interface Serial1 . 100 ! interface Serial3 no ip address no ip mroute-cache shutdown no cdp enable ! interface TokenRing0 no ip address no ip mroute-cache shutdown no cdp enable ! interface BRI0 no ip address no ip mroute-cache shutdown no cdp enable ! ip classless ! line con 0 exec-timeout 0 0 line aux 0 line vty 0 4 password ccieprep login end Router_C Current configuration: ! version 11.2 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname Router_C ! enable secret 5 . $1$jCQH$nzkHW6lQ9ywoAX87xsp9p1 enable password ccnaprep ! ipx routing 0060.09c3.df60 interface Tunnel0 no ip address ipx network CAD tunnel source Serial0 tunnel destination 172.16.10.1 ! interface Ethernet0 ipx network DAD ! interface Ethernet1 no ip address shutdown ! interface Serial0 ip address 172.16.10.2 255.255.255.0 encapsulation frame-relay no fair-queue ! interface Serial1 no ip address shutdown ! no ip classless line con 0 line aux 0 line vty 0 4 password sailing login ! end Router_A Current configuration: ! version 11.3 no service password-encryption ! hostname Router_A ! enable secret 5 . $1$.s1R$iaEqZxLnYJo2QlZi8UNaO0 enable password ccnaprep 2 of 3 04/04/00 12:57 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs/lab03.asp [...]... 172.16.4.5 end 2 of 3 04/04/00 12:58 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 4.asp Copyright © 1998-2000 CCPrep.com All rights reserved Do not duplicate or redistribute in any form Home | Logon | Support | Advertise 3 of 3 04/04/00 12:58 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 5.asp Welcome, Sebastion! To access subscriber... 13:08 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 5.asp When configuring GRE-IP, an Appletalk address must be used Copyright © 1998-2000 CCPrep.com All rights reserved Do not duplicate or redistribute in any form Home | Logon | Support | Advertise 4 of 4 04/04/00 13:08 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 6.asp Welcome,... 10.10.10.2 - - 2 of 3 04/04/00 13:10 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 8.asp Copyright © 1998-2000 CCPrep.com All rights reserved Do not duplicate or redistribute in any form Home | Logon | Support | Advertise 3 of 3 04/04/00 13:10 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 9.asp Welcome, Sebastion! To access subscriber... duplicate or redistribute in any form Home | Logon | Support | Advertise 4 of 4 04/04/00 13:09 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 7.asp Welcome, Sebastion! To access subscriber questions, select blue button on left To update profile, please go to My Account Lab FastTrack 01|02|03|04 05|06|07|08 09|10|11|12 13|14|15|16 17|18|19|20 21|22|23|24 25|26|27|28 29|30|31|32... duplicate or redistribute in any form Home | Logon | Support | Advertise 3 of 3 04/04/00 13:10 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 8.asp Welcome, Sebastion! To access subscriber questions, select blue button on left To update profile, please go to My Account Lab FastTrack 01|02|03|04 05|06|07|08 09|10|11|12 13|14|15|16 17|18|19|20 21|22|23|24 25|26|27|28 29|30|31|32... duplicate or redistribute in any form Home | Logon | Support | Advertise 3 of 3 04/04/00 12:57 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 4.asp Welcome, Sebastion! To access subscriber questions, select blue button on left To update profile, please go to My Account Lab FastTrack 01|02|03|04 05|06|07|08 09|10|11|12 13|14|15|16 17|18|19|20 21|22|23|24 25|26|27|28 29|30|31|32... duplicate or redistribute in any form Home | Logon | Support | Advertise 4 of 4 04/04/00 13:10 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab1 0.asp Welcome, Sebastion! To access subscriber questions, select blue button on left To update profile, please go to My Account Lab FastTrack 01|02|03|04 05|06|07|08 09|10|11|12 13|14|15|16 17|18|19|20 21|22|23|24 25|26|27|28 29|30|31|32... duplicate or redistribute in any form Home | Logon | Support | Advertise 3 of 3 04/04/00 13:11 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab1 1.asp Welcome, Sebastion! To access subscriber questions, select blue button on left To update profile, please go to My Account Lab FastTrack 01|02|03|04 05|06|07|08 09|10|11|12 13|14|15|16 17|18|19|20 21|22|23|24 25|26|27|28 29|30|31|32... atlanta(config-if)# atlanta# %SYS-5-CONFIG_I: Configured from console by console atlanta#copy run start Building configuration [OK] atlanta# Solution: 2 of 4 04/04/00 13:09 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 6.asp First and foremost you must have physical access to the router to perform password recovery Bit 6 defines if the configuration file will be loaded from NVRAM... processor with 16384 Kbytes of main memory F3: 7564496+94188+304272 at 0x3000060 - System Configuration Dialog - 3 of 4 04/04/00 13:09 CCPrep.com - Lab FastTrack http://www.ccprep.com/premium/fasttracks/labs/labs /lab0 6.asp At any point you may enter a question mark "?" for help Use ctrl-c to abort configuration dialog at any prompt Default settings are in square brackets "[ ]." . ISDN LAB (Caller ID) Lab 50 - ISDN LAB Lab 51 - Tacacs Lab Lab 52 - Stun Lab Lab 53 - Protocol Translation - X.25/TCP 1 of 2 09/04/00 14:20 CCPrep.com - Lab. Lab 17 - Trouble-Shooting Lab 18 - ISDN Trouble-Shooting Lab 19 - BGP External and Internal Lab 20 - X-25 Lab Lab 21 - HSRP Lab 22 - Trouble-Shooting Lab