Tài liệu LoopStar® 722 A Flexible, Cost-Effective Solution for Extending the Metro Network—Further pptx

4 233 0
  • Loading ...
1/4 trang

Thông tin tài liệu

Ngày đăng: 10/12/2013, 19:15

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Spec Sheet LoopStar ® 722 A Flexible, Cost-Effective Solution for Extending the Metro Network—Further Service providers must be able to deliver a diverse mix of services to all customers—regardless of the capacity size or location—across any type of network. Yet in this lean economy, carriers need to deliver these services at a low first-cost, using current infrastructures, while continuing to migrate toward next-generation IP/MPLS networks. ADC’s LoopStar ® 722 is ideally suited to address these challenges by extending Ethernet and TDM-based services to multiple customer locations. Typically deployed at the customer premise, the LoopStar 722 can be used as a standalone product for single customer applications, serve as an aggregator for leased access facilities’ solutions, or even sub-tend off the larger LoopStar 750. The LoopStar 722 offers a combination of fixed configurations and an option slot, and provides the same software base and feature set as the LoopStar 750. Features • Business-class Metro Ethernet services • Carrier-class TDM over packet networks • Protection from network failures • LoopStar 700 in-band or out-of-board management • Network processor-based architecture • Compact, light weight design The LoopStar 722 gives customers the flexibility to grow and adapt to current and future application requirements by offering fixed configurations for 10/100 Base-T, T1/E1 and Gigabit Ethernet. This product also provides an option slot that can be configured with the same assortment of interface modules as the LoopStar 750 to support a variety of multiservice applications and expansions. Using a single platform also means less inventory to manage, while the IP-centric architecture makes it easy to manage and provision. Incorporating the management suite’s full range of performance statistics, fault indication, loopback diagnostics, and differentiated service provisioning and definition at the multiservice demarcation point, the LoopStar 722 allows service providers to create a secure, reliable network that resolves today’s multiservice challenges while setting the stage for migration to next-generation networking. 2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 LoopStar ® 722 A Flexible, Cost-Effective Solution for Extending the Metro Network—Further Application Diversity The high-performance LoopStar 722 edge platform can reach across any type of network (SONET/SDH, Optical Ethernet, CWDM/DWDM, RPR, etc.) to deliver uniform high-speed Ethernet and TDM services to multiple locations, whether located on the provider’s network or off. Applications include: • Metro Ethernet private line or multi-point services • Voice and data private line / business services • Cost-effective aggregation rings delivering sub-50 millisecond resiliency • Network extension via fiber lateral or riser • Off-net extension or leased line With the LoopStar 722, multiservice traffic can now be transported efficiently and cost-effectively to any customer location—across a single network—instead of having to use expensive overlay schemes. 9 / 0 6 • 1 0 2 1 5 7 A E LoopStar ® 722 Features • Extends multiple services to multi-tenant buildings or business park environments without an expensive build-out of the network • Leverages existing network investments and reaches more customers, both on-net and off • Delivers a full range of packet and TDM services to fiber-attached locations with one universal approach • Provides the same powerful software base and management features as the LoopStar 750 • Delivers a rich set of Ethernet services required for metro networks that expand data revenue opportunities • Cost-effective, packet-based rings keep services running 24 hours a day by delivering sub-50 millisecond resiliency, automatic failover of prioritized traffic, and by providing diversely routed aggregation groups for additional redundancy and backup • Transports ILEC-quality T1/E1 services over packet networks without compromise • Extends IP management visibility to all locations, out-of-band management regardless of the network infrastructure, and reduces truck rolls, thereby saving money in capex expense • New protocols, interfaces and features can be added quickly and easily as they emerge via a software download, rather than having to perform forklift upgrades • Easily deployed at the customer premise with full frontal access to interfaces.Can either be wall-mounted or rack-mounted Central office or hub Ethernet Edge Switch Multi-Customer On-Net Single Customer On-Net Fiber-attached locations Ethernet T1/E1 Ethernet T1/E1 Single Customer Off-Net Ethernet T1/E1 IP Core 100base FX or GigE Class 5 Metro Network (SONET/SDH or Optical Ethernet) DS3 DS3 OCn T1/E1 or GigE DS3 Ethernet T1/E1 PSTN LEC LS 745 LS 722 LS 750 LS 722 LS 722 LS 750 LS 722 The LoopStar 722 delivers cost-effective Ethernet and TDM services to single customer locations, and can be used in conjunction with the LoopStar 750 for larger sub-tending configurations. 3 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Specifications Data Interfaces • 4 x 10/100 Base-T • 2 x T1/E1 • 1 x GigE (SFP) • 2 GigE (SFP, Ring only) • 1 option slot—supports all LoopStar 750 interface modules, including: - OC-12c/STM-4c - OC-3c/STM-1 - DS3 - T1/E1 - 10/100 Base-T - 100 Base-FX - Channelized DS3 Management • CLI management interfaces - RS-232 - 2 x 10/100 • In-band or out-of-band • SNMP • FTP to download multiple software images and configurations • LoopStar 700 intelligent management Ethernet Services • 802.1d bridging • 802.1p prioritization • 802.1q VLAN tagging/stacking • VLAN switching • MPLS/VPLS • 802.3ad Link Aggregation • Rate-limiting per port or VLAN: - I Mb/s increments (1 to 100M) - 50 Mb/s increments (100 to 1000M) • Protected Switching Ring (PSR) with 50/msec resiliency • Spanning Tree Protocol Circuit Emulation Services • Framed or unframed mode • Fixed or Adaptive Jitter Buffer • Adaptive, BITS, Loop or Internal (Stratum 4) timing modes • Round-trip and one-way delay measurements • Local and remote loopbacks • ANSI t1.231 reports Physical • 2.2” high x 17” wide x 11” deep (including I/O modules) • 0° to 50° C (operating) • ETSI 300-119-3 • FCC Part 15 – Class A • UL 60950, EN 60950 • EN 55022 – Class A Power • AC Power: 90-264 V auto ranging, 47-63 Hz • DC Power using External Outboard Power Module (OPM) -48 VDC nominal (-40 to -60 VDC)or 24 VDC LoopStar ® 722 A Flexible, Cost-Effective Solution for Extending the Metro Network—Further 9 / 0 6 • 1 0 2 1 5 7 A E LoopStar ® 722 Spec Sheet Description Catalog Number LPS-722 AC Package (2T1/E1, 4BT, 1GE, 1 slot, no optics) *Includes 1 AC power supply and AC power cord, blanking plate, 19” and 23” rack mount brackets, console cable, license for basic software and documentation LPS-722-AC L1 LPS-722-48VDC Package (2T1/E1, 4 BT, 1GE, 1 slot, no optics) *Includes 1-48VDC power supply (OPM4812), blanking plate, 19” and 23” rack mount brackets, console cable, license for basic software and documentation LPS-722-48DC L1 Interface Cards LoopStar 5000/2200/2100 Blank Interface Slot Faceplate 10/100 BaseT Ethernet-8 port 100BASE FX SM-8 port, fixed optics 100BaseFX MM-8 port, fixed optics Gigabit Ethernet, SFP-1 port, w/o optics T1/E1/J1-8 port (with NxT1/E1 Uplink) DS3, Clear Channel-3 port Dual Gigabit Ethernet Ring, SFP-2 port w/o optics DS3, Channelized, MLPPP only, support 8 bundles of up to 8 T1s OC-3/STM-1, Clear Channel-1 port, w/o optics OC-12/STM-4, Clear Channel-1 port, w/o optics LPS-7INF-BLNK L1 LPS-7INF-FE L1 LPS-7INF-100SM L1 LPS-7INF-100MM L1 LPS-7INF-Gig L1 LPS-7INF-T1E1 L1 LPS-7INF-DS3 L1 LPS-7INF-2Gig L1 LPS-7INF-DS3C L1 LPS-7INF-STM1 L1 LPS-7INF-STM4 L1 O r d e r i n g I n f o r m a t i o n Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 102157AE 9/06 Revision © 2006 ADC Telecommunications, Inc. All Rights Reserved . money in capex expense • New protocols, interfaces and features can be added quickly and easily as they emerge via a software download, rather than having. fixed configurations and an option slot, and provides the same software base and feature set as the LoopStar 750. Features • Business-class Metro Ethernet services
- Xem thêm -

Xem thêm: Tài liệu LoopStar® 722 A Flexible, Cost-Effective Solution for Extending the Metro Network—Further pptx, Tài liệu LoopStar® 722 A Flexible, Cost-Effective Solution for Extending the Metro Network—Further pptx, Tài liệu LoopStar® 722 A Flexible, Cost-Effective Solution for Extending the Metro Network—Further pptx

Gợi ý tài liệu liên quan cho bạn

Nhận lời giải ngay chưa đến 10 phút Đăng bài tập ngay