Activity 2.2: Identifying Design Phases In this activity, you will start applying the principles of conceptual, logical, and physical design by associating design steps with these phases. Objectives After completing this lab, you will be able to: ! Demonstrate your understanding of the conceptual, logical, and physical design phases of the MSF Design Process. Before You Begin This activity includes both small group tasks and class discussion. Prerequisites You must have completed Activity 1.1, “Identifying Design Steps.” Materials This activity requires the output of Activity 1.1, “Identifying Design Steps.” Time to complete this activity: 10 minutes followed by a 10 minute discussion. 10 Activity 2.2: Identifying Design Phases Exercise 1: Identifying Design Phases ! Identify the design phase for the design steps of Activity 1.1 1. Read each step identified earlier and list them in the table provided. 2. Assign a phase of conceptual, logical, or physical to each step. 3. Provide the reason for the assignment. After completing the above steps, you will discuss your responses with the class. Use the space below for brainstorming. Activity 2.2: Identifying Design Phases 11 Design step Design phase Reason 1 2 3 4 5 6 7 8 THIS PAGE INTENTIONALLY LEFT BLANK . complete this activity: 10 minutes followed by a 10 minute discussion. 10 Activity 2. 2: Identifying Design Phases Exercise 1: Identifying Design Phases ! Identify. Use the space below for brainstorming. Activity 2. 2: Identifying Design Phases 11 Design step Design phase Reason 1 2 3 4 5 6 7 8 THIS PAGE INTENTIONALLY