Migrating to IHO Certificate for S-63 1.1 in Raytheon ECDIS This guide is based on the Raytheon Anschütz ECDIS Version E04.10 Migrating to IHO certificate for S-63 1.1 Migrating from P R IMAR C R T to IHO.C R T To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS The IHO.CRT is located on any AVCS S-63 1.1 Media To install it please insert the S-63 1.1 Media into your ECDIS and follow the steps below: Select “Charts” Select “Licence” Select “IHO S63 S63 Licence Administration” On “IHO S63 Licence Administration” load window, select “Certificate SA Public Key” Then select location of new Certificate (i.e CD, USB) Select ”Import SA Public Key” Migrating to IHO certificate for S-63 1.1 You will then be asked: Click on “Yes” to proceed with the installation of the new IHO Certificate The IHO.CRT has now been installed and S-63 1.1 data can be loaded into the ECDIS R everting to P R IMAR C R T If for any reason the migration to S-63 1.1 fails then the PRIMAR.CRT file will need to be reinstalled To this insert any AVCS S-63 1.0 Media into your ECDIS and follow the same process as outlined above except this time selecting the PRIMAR.CRT Your system will now be in the same state as before attempting the upgrade and you can continue to use AVCS S-63 1.0 data However, you should inform your Admiralty Chart Agent of the problems that you have encountered UKHO 2013 All Rights Reserved The copyright in this document, which contains information of a proprietary nature, is vested in UKHO The content of this document may not be used for purposes other than that for which it has been supplied and may not be reproduced, either wholly or in part, in any way whatsoever ...Migrating to IHO certificate for S-63 1.1 Migrating from P R IMAR C R T to IHO. C R T To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS The IHO. CRT is located... ”Import SA Public Key” Migrating to IHO certificate for S-63 1.1 You will then be asked: Click on “Yes” to proceed with the installation of the new IHO Certificate The IHO. CRT has now been installed... ECDIS and follow the steps below: Select “Charts” Select “Licence” Select IHO S63 S63 Licence Administration” On IHO S63 Licence Administration” load window, select “Certificate SA Public Key”