Migrating to IHO Certificate for S-63 1.1 in Kelvin Hughes ECDIS This guide is based on the KH Manta ZM-1816 v3.9.3 Migrating to IHO certificate for S-63 1.1 Migrating from P R IMAR C R T to IHO.C R T To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS The IHO.CRT is located on any AVCS S-63 1.1 Media To install it please insert the S-63 1.1 Media into your ECDIS and follow the steps below: In the “Chart Maintenance” window, select the “Chart Licence” Tab Select the “Install Certificate from Removable Media” Tab The system will automatically scan for available certificates, Select the IHO.CRT Migrating to IHO certificate for S-63 1.1 Select OK to confirm the installation The IHO.CRT has now been installed and S-63 1.1 data can be loaded into the ECDIS R everting to P R IMAR C R T If for any reason the migration to S-63 1.1 fails then the PRIMAR.CRT file will need to be reinstalled To this insert any AVCS S-63 1.0 Media into your ECDIS and follow the same process as described above except this time selecting the PRIMAR.CRT Your system will now be in the same state as before attempting the upgrade and you can continue to use AVCS S-63 1.0 data However, you should inform your Admiralty Chart Agent of the problems that you have encountered UKHO 2013 All Rights Reserved The copyright in this document, which contains information of a proprietary nature, is vested in UKHO The content of this document may not be used for purposes other than that for which it has been supplied and may not be reproduced, either wholly or in part, in any way whatsoever ...Migrating to IHO certificate for S-63 1.1 Migrating from P R IMAR C R T to IHO. C R T To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS The IHO. CRT is located... automatically scan for available certificates, Select the IHO. CRT Migrating to IHO certificate for S-63 1.1 Select OK to confirm the installation The IHO. CRT has now been installed and S-63 1.1 data can