FURUNO installing IHO

4 4 0
  • Loading ...
1/4 trang

Thông tin tài liệu

Ngày đăng: 15/03/2019, 10:36

Migrating to IHO Public Key for S-63 1.1 in Furuno ECDIS This guide is based on the Furuno FEA 2107/2807 ECDIS Version 06.21 Migrating to IHO certificate for S-63 1.1 Migrating from PRIMAR.PUB to IHO.PUB To install S-63 1.1 Data the latest IHO certificate (Public Key) will need to be installed in your ECDIS The IHO.PUB is located on any AVCS S-63 1.1 Media To install it please insert the S-63 1.1 Media into your ECDIS and follow the steps below: Note: Furuno ECDIS use the IHO.PUB not the IHO.CRT To load the IHO.PUB Certificate: Select ‘Chart Permits’ from the ‘Chart Menu’ window Select ‘Public Key’ Migrating to IHO certificate for S-63 1.1 3 The installed Public Key will then be displayed Select ‘Load New’ On ‘Public Key Load’ window, select the Drive where the Public Key is stored Highlight the IHO.PUB Public Key to be installed Click ‘Load’ A new ‘Public Key’ window will then be shown displaying the IHO.PUB Public Key file This will not overwrite the currently installed Public Key until the user clicks on ‘Accept New’ The IHO.PUB is then installed and S-63 1.1 data can be loaded into the ECDIS Migrating to IHO certificate for S-63 1.1 Reverting to PRIMAR.CRT If for any reason the migration to S-63 1.1 fails then the PRIMAR.PUB file will need to be re-installed To this you will need to obtain a copy of the PRIMAR.PUB If you not already have a copy then please contact UKHO customer services (customerservices@ukho.gov.uk) who will be able to supply this to you Once received please follow exactly the same process as outlined above however this time browsing to the location of the PRIMAR.PUB Your system will now be in the same state as before attempting the upgrade and you can continue to use AVCS S-63 1.0 data However, you should inform your Admiralty Chart Agent of the problems that you have encountered UKHO 2013 All Rights Reserved The copyright in this document, which contains information of a proprietary nature, is vested in UKHO The content of this document may not be used for purposes other than that for which it has been supplied and may not be reproduced, either wholly or in part, in any way whatsoever ... steps below: Note: Furuno ECDIS use the IHO. PUB not the IHO. CRT To load the IHO. PUB Certificate: Select ‘Chart Permits’ from the ‘Chart Menu’ window Select ‘Public Key’ Migrating to IHO certificate...Migrating to IHO certificate for S-63 1.1 Migrating from PRIMAR.PUB to IHO. PUB To install S-63 1.1 Data the latest IHO certificate (Public Key) will need to be installed in your ECDIS The IHO. PUB... where the Public Key is stored Highlight the IHO. PUB Public Key to be installed Click ‘Load’ A new ‘Public Key’ window will then be shown displaying the IHO. PUB Public Key file This will not overwrite
- Xem thêm -

Xem thêm: FURUNO installing IHO , FURUNO installing IHO

Gợi ý tài liệu liên quan cho bạn

Nhận lời giải ngay chưa đến 10 phút Đăng bài tập ngay