Art.Nr.102907 Version 1.03 Short Instructions IS-Control Please read the respective Operating Manual for this oven before you use your new WIESHEU Oven Control Panel When operating the intelligent Control Unit, the text in the display leads you simply and comfortably through the menu To select a respective menu function, turn the Control Knob „ W“ and when the required menu function is reached, press to confirm Selected a wrong value? No problem, pressing key „C“ gets you back to the previous menu step individual Logo Display internal appliance number for the actual unit to be programmed time and actual date 15:00 30.06.04 ACTUAL operating DEVICE menue displayed correction key „C“ selection/confimation knob „W“ area for helping text key „door open/ close“ at oven without electrical door clasp without any function When the oven is powered on, it is in the Stand - By Mode The Oven is operational when the selection knob „W“ is pressed for a while Push the button for not less then 3sec The work menu flashs on in the display Choose your favourite programm and confirm it through pressing the control knob The oven will start automatically Power down Press for one time short the button “C” Now you are in the main menu Turn the selection knob and mark with the choice bar on power down Approve the choice through pushing the knob.The oven will power down immediately Page Edit Copy Move Delete Baking Program 1-200 Cleaning Cool down Programming Manual Baking Work Auto Start Settings Door Cleaning Appliance Setting* switch code System setting* Time Setting Pictogramms Main Menue Light Door ** Ringer Display Setting* Appliance Country Setting Program Change Pin Code Set Time and Date* Summertime Text & Picto Picto Text Switch Off Appliance Forward Close Open ** according to oventype *optional with Pin-Setting Tone Interval Volume Activate Appliance Time Format Contrast Show Appliance °C oder °F Programs Running Logo Change Parameter Language Programming Menues Of The IS Control Art.Nr.102907 Version 1.03 Short Instructions IS-Control Page ... Running Logo Change Parameter Language Programming Menues Of The IS Control Art.Nr.102907 Version 1.03 Short Instructions IS- Control Page ... Setting* switch code System setting* Time Setting Pictogramms Main Menue Light Door ** Ringer Display Setting* Appliance Country Setting Program Change Pin Code Set Time and Date* Summertime