TEMS discovery device 10 0 user guide

420 296 3
TEMS discovery device 10 0 user guide

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

User's Guide TEMS Discovery Device 10.0 Contents Getting Started 1.1 Contact Information 1.2 TEMS Discovery Startup Window 1.3 System Requirements 1.3.1 1.3.2 Hardware Requirements 1.3.2.1 Hardware Requirements – TEMS Discovery Professional 1.3.2.2 Hardware Requirements – TEMS Discovery Enterprise Terminology 1.5 Data Archive vs Export vs Sharing 1.6 A Few Tips 1.7 Demo Documents 1.8 Demo Project 10 1.9 Walk-U-Through 11 1.10 Creating Projects from Scratch 13 1.11 Get Your Algorithm Working 15 1.12 Generate Reports As You Wish 16 Overview 2.2 2.3 17 Main Window 17 2.1.1 Data List and Progress Log Panel 18 2.1.2 Data Explorer Panel 18 2.1.3 Synchronizable and Summary View Panel 18 Menu Bar 19 2.2.1 File Menu 19 2.2.2 Views Menu 19 2.2.3 Tools Menu 20 2.2.4 Configuration Menu 20 2.2.5 Statistic Menu 21 2.2.6 Help Menu 21 Main Toolbar 22 Data List and Progress Log 23 3.1 Document List 23 3.2 Project List 24 3.2.1 Project List – File/Device Listing Filter 25 3.2.2 Project List Toolbar 26 3.2.3 Project List Pop-up Menus 26 3.2.4 3.3 User's Guide Tems Software Requirements 1.4 2.1 Project Properties 30 3.2.4.1 Project Properties – GIS Settings 31 3.2.4.2 Project Properties – UDR Configuration 33 3.2.4.3 Project Properties – Cell Configuration 34 3.2.5 Open Project 35 3.2.6 Delete Project 35 3.2.7 TEMS Discovery Peers 36 GIS List 37 Contents  iii 3.4 Task Window 39 3.5 Message Log 40 3.6 ADP Management Window 40 Main Project Windows 4.1 Data Explorer 41 4.1.1 4.1.2 4.1.3 4.2 Dataset 41 4.1.1.1 Dataset Toolbar 42 4.1.1.2 Color Scheme 43 4.1.1.3 Dataset Options 44 4.1.1.4 Dataset Pop-up Menus 49 4.1.1.5 Static Composite Dataset 65 4.1.1.6 Modify Dynamic Composite Dataset Scope 67 4.1.1.7 Dataset Group 68 Cells 69 4.1.2.1 Cells Toolbar 70 4.1.2.2 Cells Pop-up Menus 70 GIS/Coverage Map 75 4.1.3.1 GIS Categories 75 4.1.3.2 GIS Pop-up Menus 78 4.1.3.3 Download Online GIS Data Source 80 4.1.3.4 UDR Attribute Browser 81 Synchronizable Views 83 4.2.1 4.2.2 4.2.3 4.2.4 Messages View 84 4.2.1.1 Messages View Toolbars 85 4.2.1.2 Display Messages 86 4.2.1.3 Navigate Messages 86 4.2.1.4 Filter Messages 86 4.2.1.5 Message Flow Diagram 87 Map View 89 4.2.2.1 Map View Toolbar 89 4.2.2.2 Dataset in Map View 94 4.2.2.3 Cells in Map View 95 4.2.2.4 GIS in Map View 98 4.2.2.5 Cell Radius Analysis 99 4.2.2.6 Terrain Profile 101 4.2.2.7 Reposition Waypoints 102 4.2.2.8 3D Map View 103 4.2.2.9 Layer/View Options 105 4.2.2.10 Create Output 120 Time Chart 128 4.2.3.1 Time Chart Pop-up Menu 128 4.2.3.2 Time Chart Toolbar 128 4.2.3.3 Time Chart View Options 131 Metric Correlation 132 4.2.4.1 Correlation View Toolbar 134 4.2.5 Table View 136 4.2.6 Point Detail View 139 4.2.7 Instant Chart 142 4.2.8 Google Earth 145 4.2.8.1 iv  Contents 41 Google Earth Toolbar 147 User's Guide Tems 4.2.9 4.2.10 Download GIS Data – Google Map 148 Bing Map 150 4.2.9.1 Bing Map Toolbar 151 4.2.9.2 Download GIS Data – Bing Map 151 Wave View 152 Legend View 154 4.4 Summary Data Views 156 Histogram 156 4.4.1.1 Histogram Toolbar 157 4.4.1.2 Histogram View Options 158 4.4.2 Batch PDF View 160 4.4.3 Problem Summary View 160 4.4.4 Sector Statistics View 163 4.4.5 Multi-dimension Statistic View 164 Tools 5.1 167 Script Builder 168 5.1.1 Script Editor & Private Functions Editor 169 5.1.2 Data Object: Metric List 170 5.1.3 Data Object: RRC IEs 171 5.1.4 Data Object: Threshold 172 5.1.5 Built-in Flags 173 5.1.6 User's Guide Tems Google Earth View Options 148 4.2.8.3 4.3 4.4.1 4.2.8.2 5.1.5.1 CONDITION_FLAG 173 5.1.5.2 TARGET_VALUE: 173 5.1.5.3 EVENT: 173 5.1.5.4 EVENT_TIMESTAMP: 174 5.1.5.5 EVENT_TYPE: 174 5.1.5.6 MESSAGE: 174 5.1.5.7 MESSAGE_INDEX: 175 5.1.5.8 EOF: 175 5.1.5.9 TIMESTAMP: 175 5.1.5.10 LOG_FILE_NAME: 175 5.1.5.11 IS_NEMO_DATA: 176 5.1.5.12 IS_TEMS_DATA: 176 5.1.5.13 IS_QVOICE_DATA: 176 5.1.5.14 IS_QVOICE_MASTER: 176 5.1.5.15 IS_QVOICE_SLAVE: 177 5.1.5.16 IS_JDSU_DATA: 177 5.1.5.17 QVOICE_MASTER_END_TIMESTAMP: 177 5.1.5.18 QVOICE_SLAVE_END_TIMESTAMP: 177 5.1.5.19 TIMESTAMP_START_OF_FILE: 177 Built-in User-defined Functions 178 5.1.6.1 ClearAllEvents: 178 5.1.6.2 ClearEvent: 179 5.1.6.3 ReplaceEvent: 179 5.1.6.4 AddEvent: 180 5.1.6.5 AssignMetricValue: 180 5.1.6.6 ReplaceMetricValue: 181 5.1.6.7 GetLatLon: 181 5.1.6.8 IsValueValidStatic: 182 Contents  v GetDeviceAttribute: 182 5.1.6.11 SetDeviceAttribute: 183 5.1.6.12 GetWcdmaUarfcnIndex: 183 5.1.6.13 ElementNotContain: 183 5.1.6.14 ElementMissing: 184 5.1.6.15 FindPairValue: 184 5.1.6.16 MaxOfArrayList: 184 5.1.6.17 CountOfArrayList: 185 5.1.6.18 IsIdentical: 185 5.1.6.19 IsIdenticalIgnoreOrder: 185 5.1.6.20 IsIdenticalFloatArray: 185 5.1.6.21 GetDisplayString: 186 5.1.6.22 ArrayListContains: 186 5.1.6.23 ArrayListIndexOf: 186 5.1.6.24 SameMemberInt: 186 5.1.6.25 ConvertToInt: 187 5.1.6.26 ConvertToDateString: 187 5.1.6.27 ConvertToTimeString: 187 5.1.6.28 ConvertToDateTimeString: 188 5.1.6.29 ExtractNumericValue: 188 5.1.6.30 GetSectorParameter: 189 5.1.6.31 GetSectorParameters: 190 5.1.6.32 GetOperatorByMncMcc: 191 5.1.6.33 GetOperatorBySid: 191 5.1.6.34 GetOperatorByOperatorId: 191 5.1.6.35 TimeDiff: 191 Built-in Math Function 193 5.1.8 Built-in String Function 193 5.1.9 Built-in Classes 193 5.1.10 Declaration 194 5.1.12 Programming in C# Language 195 5.1.11.1 Statements 195 5.1.11.2 Declaring and Initializing Variables 195 5.1.11.3 Casting Variables 196 5.1.11.4 Writing Comments 196 5.1.11.5 Using Blocks { } 196 5.1.11.6 Declaring Functions 196 5.1.11.7 Using the return statement 197 5.1.11.8 Branching Statements 197 5.1.11.9 Iterations 198 5.1.11.10 Expression 200 Example 201 Report Template Builder – Measurement Data 204 5.2.1 Report Builder Toolbar and Pop-up Menu 206 5.2.2 File Formats and Limitations 207 5.2.3 vi  Contents IsValueValid: 182 5.1.6.10 5.1.7 5.1.11 5.2 5.1.6.9 Define Report Template 208 5.2.3.1 Metric List 209 5.2.3.2 Report Options 210 5.2.3.3 Define Trend Chart 213 5.2.3.4 Define Single Chart 213 User's Guide Tems 5.2.4 5.2.5 5.2.6 5.3 5.2.3.5 Define Multi-series Chart 216 5.2.3.6 Define Chart Skeleton 218 5.2.3.7 Define Statistic Data 220 5.2.3.8 Define Tabular List 222 5.2.3.9 Define Correlation Chart 222 5.2.3.10 Options of Repetition in Report 225 Generating Microsoft Office Word Report 229 5.2.4.1 Requirement 229 5.2.4.2 MS-Word reporting template 229 5.2.4.3 Sample Word Report Template 233 Generate Report From Report Template 233 Available Chart Types 236 5.2.6.1 Column Charts 236 5.2.6.2 Bar Charts 237 5.2.6.3 Line Charts 237 5.2.6.4 Pie Charts 239 5.2.6.5 XY (Scatter) Charts 239 5.2.6.6 Area Charts 240 5.2.6.7 Doughnut Charts 241 5.2.6.8 Radar Charts 241 5.2.6.9 Bubble Charts 242 5.2.6.10 Stock Charts 242 5.2.6.11 Cylinder, Cone, or Pyramid Charts 243 ADP Management 244 5.3.1 ADP Step1: File Monitor 245 5.3.2 ADP Step2: Output Data Source 249 5.3.3 ADP Step3: Output Scheduler 250 5.3.4 ADP Step4: Output Type 252 5.4 Plug-in Manager 253 5.5 Neighbor List Analyzer 254 5.6 Antenna Pattern Viewer 255 5.7 Batch Printing 256 5.8 Print Queue 257 5.9 Signaling Message Browser 258 5.10 Parameter Mapping 260 5.11 Log File Database Browser 261 5.12 Log File Database Cleanup 262 5.13 Measurement Data Cleanup 263 Statistic 265 6.1 Cube Management 266 6.2 Cube Creator 267 6.3 Statistic Browser 269 6.3.1.1 Statistic Data Cube View – Grid 271 6.3.1.2 Statistic Data Cube View – Map 272 6.3.1.3 Statistic Data Cube View – Chart 273 6.3.1.4 File/Device Drilldown 273 6.4 Statistic Dashboard 275 6.5 Statistic Dashboard Builder 276 6.5.1.1 User's Guide Tems Dashboard Builder Toolbars 281 Contents  vii 6.6 Report Template Builder – Statistic Data 282 6.6.1 6.7 Cube Data Scope Configurations 288 6.8 Statistic Data Cleanup 289 6.9 Default GIS Builder 290 6.10 Default Network Configuration Builder 291 6.11 Database User Management 292 6.12 Database User Access Permission 294 6.13 Measurement Data Server List 295 6.14 Enterprise License Information 296 Configuration and Settings 297 7.1 Publish/Update via FTP Setting 298 7.2 Configuration Management 299 7.3 Document Management 301 7.4 Generic User-Defined Metric Group 303 7.5 Metric Frame Import Configuration 306 7.6 Plot Band Definition 307 7.6.1 Plot Band Auto Generator 308 7.7 User-Defined Parameters 309 7.8 Dynamic Composite Dataset 311 7.9 Batch Configuration 312 7.10 Event Set Filter 313 7.11 Selective Task Condition Expression Builder 314 7.12 Message Coloring 315 7.13 Messages View KeyInfo Settings 316 7.14 Point Detail Settings 317 7.15 Instant Chart Component Content 318 7.16 Data Networking 319 7.16.1 Data Networking Configuration 321 7.16.2 Distributed Processing System 322 7.17 UDR Project Mapping 323 7.18 Device Attribute Assignment Template 324 7.19 Wireless Operator Lookup Table 327 7.20 Email Templates 328 7.21 Options 329 7.22 viii  Contents Generate Statistic Report From Report Template 287 7.21.1 General Options 329 7.21.2 Measurement Data Storage Options 333 7.21.3 Statistic Data Storage Options 335 7.21.4 Log File Storage Options 337 7.21.5 Color Scheme Options 338 7.21.6 TA Database Options 339 Import Data 340 7.22.1 Import Drive Test Data 340 7.22.2 Import UETR 343 7.22.3 Import Network Configuration 345 7.22.3.1 Prepare Network Configuration File 346 7.22.3.2 General Configuration 349 User's Guide Tems 7.22.3.3 7.23 Import Antenna Data 352 7.22.5 Import GIS Data 354 7.22.6 Import Coverage Map 357 7.22.7 Import HO Matrix 358 7.22.8 Plug-in for Custom Import 358 Specific Topics 359 7.23.1 Floor Print Rectifier 359 7.23.2 Save & Restore Working Environment 360 7.23.3 8.2 Cell Configuration 361 7.23.3.1 Edit Cell Configuration 361 7.23.3.2 Cell Site/Sector Filter Expression Builder 363 7.23.3.3 Edit Cell/Sector Parameters 365 7.23.3.4 Cell Configuration View Options 366 7.23.3.5 Cell Site Grouping Logic 371 7.23.3.6 Neighbor List Work Order 373 7.23.4 Delta/Special-type Grid-binned Metric 374 7.23.5 Pilot Pollution Analysis 375 7.23.6 GSM Interference Matrix 377 Appendix 8.1 Create Mapping 351 7.22.4 379 Event List in Pre-defined Scripts 379 8.1.1 CDMA_Events 379 8.1.2 EVDO_Events_Logbased 381 8.1.3 GSM_WCDMA_Events 382 8.1.4 LTE_Events 388 8.1.5 Nemo_Events 389 8.1.6 QVoice_Markers 390 8.1.7 TEMS_Collectors_Events 398 Enabling FILESTREAM in SQL Server 2008 R2 404 Index 409 User's Guide Tems Contents  ix Marker Category Not Categorized Markers MTC Dial MTC Setup MTC Connect MTC ConnectFail MTC Disconnect MTC Release MTC ReleaseError MTC Break MTC CallError MTC SystemRelease MTC UserRelease Configuration MOC Dial Configuration MOC Setup Configuration MOC Connect Configuration MOC ConnectFail Configuration MOC Disconnect Configuration MOC Release Configuration MOC ReleaseError Configuration MOC Break Configuration MOC CallError Configuration MOC SystemRelease Configuration MOC UserRelease Configuration MTC Dial Configuration MTC Setup Configuration MTC Connect Configuration MTC ConnectFail Configuration MTC Disconnect Configuration MTC Release Configuration MTC ReleaseError Configuration MTC Break Configuration MTC CallError Configuration MTC SystemRelease Configuration MTC UserRelease VT MOC Dial 396  Appendix Marker Description WSP Abort mru exceeded WSP Abort more exceeded WSP Abort peer req WSP Abort net error WSP Abort user req WSP Abort user rfs WSP Abort user pnd WSP Abort user dcr WSP Abort user dcu Not Categorized Markers VT MOC Setup VT MOC Connect VT MOC ConnectFail VT MOC Disconnect VT MOC Release VT MOC ReleaseError VT MOC Break VT MOC CallError VT MOC SystemRelease VT MOC UserRelease VT MTC Dial VT MTC Setup VT MTC Connect VT MTC ConnectFail VT MTC Disconnect VT MTC Release VT MTC ReleaseError VT MTC Break VT MTC CallError VT MTC SystemRelease VT MTC UserRelease VoIP MOC Dial (SIP Invite) VoIP MOC Connect (SIP Invite OK) VoIP MOC ConnectFail (Timeout) VoIP MOC Disconnect (SIP Bye) VoIP MOC Release (SIP Bye OK) VoIP MOC ReleaseError (SIP Bye NOK or Timeout) VoIP MOC Break VoIP MOC CallError (SIP Invite NOK) VoIP MOC SystemRelease VoIP MOC UserRelease VoIP MTC Dial (SIP Invite) VoIP MTC Connect (SIP Invite OK) VoIP MTC ConnectFail VoIP MTC Disconnect (SIP Bye) VoIP MTC Release VoIP MTC ReleaseError (SIP Bye NOK or Timeout) VoIP MTC Break VoIP MTC CallError (SIP Invite NOK) VoIP MTC SystemRelease VoIP MTC UserRelease User's Guide Tems Appendix  397 8.1.7 TEMS_Collectors_Events Event Category Event Description Common EV-DO 1x Tune-away EV-DO Dynamic Rate EV-DO Fixed Rate EV-DO Island Narrowband Interference Polluter Datalink Failure EGPRS MS Out Of Memory PDU Error Activated AQM Out of Synch AQM Synched Authentication Failure Cell Reselection Deactivated Dedicated Mode Filemark GPS Position Invalid GPS Position Valid Idle Mode Limited Service Mode Location Area Update Location Area Update Failure No reported data No Service Mode Packet Mode RACH Error Recording Paused Recording Resumed Ringing Routing Area Update Routing Area Update Failure Rove In To GAN Rove In To GAN Failure Rove In To GAN Redirect Rove Out From GAN Rove Out From GAN Failure Scanning Mode Silent Call SMS Error Common SMS Received SMS Sent More Than Strong SCs RRC Connection Abnormal Release RRC Connection Reject RRC Established RRC Protocol Error SHO Procedure Complete SHO Procedure Complete Without Measurement Control Access EV-DO Access Failure 398  Appendix Event Category Event Description EV-DO Access Success Attach and Detach PS Attach PS Attach Failure PS Detach Call Ending Call End Dropped Call Call Setup Results Blocked Call Call Established Call Setup Call Start Call Attempt Call Attempt Retry Call Initiation CDMA Handoff Others Hard Handoff Idle Handoff Idle Handoff To Analog Idle Handoff To CDMA Idle Handoff To EV-DO Traffic Handoff To Analog Traffic Handoff To CDMA Traffic Handoff To EV-DO CDMA Soft Handoff Soft Handoff 2-Way Soft Handoff 3-Way Soft Handoff 4-Way Soft Handoff 5-Way Soft Handoff 6-Way Soft Handoff Complete Channel Type Switching Channel Switch R4 to R5 Channel Switch R4 to R5 Failure Channel Switch R5 to R4 Channel Switch R5 to R4 Failure PS Channel Type Switch Complete PS Channel Type Switch Failure Connection EV-DO Connection Failure EV-DO Connection Success EV-DO Session Failure EV-DO Session Success DCH Rate Switching PS RAB Channel Rate Switch Complete PS RAB Channel Rate Switch Failure EVDO_Handoff EV-DO Handoff Active EV-DO Handoff Actives EV-DO Handoff Actives EV-DO Handoff Actives EV-DO Handoff Actives EV-DO Handoff Actives Handover Handover Intracell Handover Intracell Failure Handover Handover Failure Handover From GAN Handover From GAN Failure Handover To GAN User's Guide Tems Appendix  399 Event Category Event Description Handover To GAN Failure HS Serving Cell HO HS Serving Cell HO Failure Hard Handover Intra-frequency Hard Handover Intra-frequency Hard Handover Failure Idle Procedures Inter-frequency Cell Reselection LTE Attach EUTRAN Attach Complete LTE Detach EUTRAN Detach Accept LTE EUTRA Reporting Events EUTRAN RRC A1 Event EUTRAN RRC A2 Event EUTRAN RRC A3 Event EUTRAN RRC A4 Event EUTRAN RRC A5 Event LTE Handover EUTRAN Inter-frequency Handover EUTRAN Inter-frequency Handover Failed EUTRAN Intra-frequency Handover EUTRAN Intra-frequency Handover Failed LTE MIMO MIMO Mode Changed Measurement Report Events Measurement Report Measurement Report Measurement Report Measurement Report Missing Neighbor Alerts Missing CDMA Neighbor Missing GSM Neighbor Missing GSM Neighbor, GSM Symmetry Missing LTE Neighbor Missing TD-SCDMA Neighbor Missing WCDMA Intra-frequency Neighbor, based on DN reporting Missing WCDMA Neighbor PDP Activation PDP Context Activation Failure PDP Context Activation Time PDP Context Activation PDP Context Activation Failure PDP Deactivation PDP Context Deactivation PING Results Ping Timeout Timer Expiry T200 Expired T3126 Expired T3162 Expired T3168 Expired T3170 Expired UE-Reported Failures Radio Bearer Reconfiguration Failure Radio Bearer Setup Failure Security Mode Failure Not Categorized Events Data Activated Attach Failure Attach Setup Time Data Deactivated 400  Appendix Not Categorized Events DNS Host Name Resolution Failure DNS Host Name Resolution Time Email Receive End Email Receive Error Email Receive Start Email Send End Email Send Error Email Send Start FTP Download Data Transfer Cutoff FTP Download Data Transfer Time FTP Download End FTP Download Error FTP Download IP Service Access Failure FTP Download IP Service Setup Time FTP Download Mean Data Rate FTP Download Service Not Accessible FTP Download Setup Time FTP Download Start FTP Upload Data Transfer Cutoff FTP Upload Data Transfer Time FTP Upload End FTP Upload Error FTP Upload IP Service Access Failure FTP Upload IP Service Setup Time FTP Upload Mean Data Rate FTP Upload Service Not Accessible FTP Upload Setup Time FTP Upload Start HTTP Data Transfer Cutoff HTTP Data Transfer Time HTTP End HTTP Error HTTP IP Service Access Failure HTTP IP Service Setup Time HTTP Mean Data Rate HTTP Service Not Accessible HTTP Setup Time HTTP Start MMS Receive Data Transfer Cutoff MMS Receive Data Transfer Time MMS Receive End MMS Receive Error MMS Receive Start MMS Retrieval Failure User's Guide Tems Appendix  401 Not Categorized Events MMS Retrieval Time MMS Send Data Transfer Cutoff MMS Send Data Transfer Time MMS Send End MMS Send Error MMS Send Failure MMS Send Start MMS Send Time Network Connect Network Connect Error PDP Context Cutoff Ping End Ping Error Ping Roundtrip Time Ping Start Streaming End Streaming Error Streaming Intermediate Vsqi Streaming Quality Mtqi Streaming Quality Vsqi Streaming Reproduction Cutoff Streaming Reproduction Start Delay Streaming Reproduction Start Failure Streaming Service Access Time Streaming Service Not Accessible Streaming Session Cutoff Streaming Start Streaming State TCP Download End TCP Download Error TCP Download Start TCP Handshake Time TCP Upload End TCP Upload Error TCP Upload Start UDP Download End UDP Download Error UDP Download Total Packet Loss UDP Download Start UDP Upload End UDP Upload Error UDP Upload Total Packet Loss UDP Upload Start WAP Activation Failure 402  Appendix Not Categorized Events WAP Activation Time WAP End WAP Error WAP Page Data Transfer Cutoff WAP Page Data Transfer Time WAP Page Mean Data Rate WAP Page Request Failure WAP Page Request Time WAP Portal Access Time WAP Portal Not Accessible WAP Site Access Time WAP Site Not Accessible WAP Start Cell Change Order From UTRAN Cell Change Order From UTRAN Failure Cell Change Order To UTRAN Cell Change Order To UTRAN Failure Cell Reselection From UTRAN Cell Reselection To UTRAN Compressed Mode Entered Compressed Mode Exited Handover From UTRAN Handover From UTRAN Failure Handover To UTRAN Handover To UTRAN Failure Baton Handover Baton Handover Failure Hard Handover Hard Handover Failure Inter-frequency Handover Inter-frequency Handover Failure Radio Link Addition Radio Link Addition Failure Radio Link Removal Radio Link Removal Failure Radio Link Replacement Radio Link Replacement Failure User's Guide Tems Appendix  403 8.2 Enabling FILESTREAM in SQL Server 2008 R2 You must enable FILESTREAM on the Database Engine instance of the SQL Server The following steps describe how to enable FILESTREAM by using the SQL Server Configuration Manager From the Start menu, go to All Programs | Microsoft SQL Server 2008 R2 | Configuration Tools | SQL Server Configuration Manager In the list of services, right-click SQL Server Services, and select Open from the context menu In the SQL Server Configuration Manager snap-in, locate the instance of SQL Server on which you want to enable FILESTREAM Right-click the instance, and select Properties from the context menu The SQL Server Properties dialog will be displayed 404  Appendix User's Guide Tems Appendix  405 Go to the FILESTREAM tab Make the settings described below, and then click Apply  Select the Enable FILESTREAM for Transact-SQL access check box  If you want to read and write FILESTREAM data from Windows, select Enable FILESTREAM for file I/O streaming access Enter the applicable name in the Windows Share Name box  If remote clients must access the FILESTREAM data that is stored on this share, select Allow remote clients to have streaming access to FILESTREAM data In SQL Server Management Studio, click New Query to display the Query Editor In the Query Editor, enter the following Transact-SQL code: EXEC sp_configure filestream_access_level, RECONFIGURE Click Execute Restart the SQL Server service 406  Appendix User's Guide Tems Appendix  407 Index A Add Sources From File 80 Add SQL Server – Log Files Database 337 Add SQL Server – Statistic Database 336 Antenna Pattern Data 352 API 358 Attributes 324 C Calculate Area Statistics 268 Cell Configuration Editor 361 Cell Site Icon Size 95 Coverage Map Import 357 D Data Filters 44 Database Browser 261 Database Cleanup 263 Database License Information 296 Dataset Route Direction 94 Default Statistic Database 335 Detail View 84 Direction 94 Display Cell Sites 95 E Edit Neighbor List Tool 96 Embed condition filter 212 Export Options 300 F Filtering Options 44 Functions Editor 169 G GetGlobal flag 206 GIS data files 354 GIS Data Sources 80 GIS element display options 118 Global Mapper 80 H Handover Matrix 358 HO Matrix 358 User's Guide Tems I Images/Maps 76 Intellectual Property Protection 300 K KeyInfo Settings 84 KeyInfo Settings 316 Keywords 315 L Label Display Options 95 Layer Information Elements 209 Legend display options 118 Listing Filters 46 M Message Flow Diagram 84 N Neighbor List IntelliSense Tool 96 O OLAP Cube Concept 265 Online GIS Data Sources 80 P Pick Serving Sector Tool 96 Plot Band Auto Generator 308 R Remove Cell Sites from Display 96 Render settings 112 Repetition in Report 225 Repetition Key 206, 283 Route Direction 94 S Script Editor 169 Search Script Results 47, 48 Sector Coverage tool 97 Sector Selector tool 97 SetGlobal flag 206 Spatial Data Products and Formats 354 Spider Movement tool 115 Spider Movement Tool 94 Statistic Dashboard 275 Statistic Data Cube View 269 Index  409 T TerraServer Images/Maps 76 Tooltips 89 V Vector Map Detail Loading 112 410  Index ... PACIFIC + 60. 3. 502 1.5 202 Hours of Operation: 8: 30 AM - 5 :00 PM CHINA +86 . 10. 6566 608 8 Hours of Operation: 9 :00 AM - 5 :00 PM Email: tems. support.china@ascom.com INDIA +91.98. 805 005 00 User' s Guide Tems. .. Cache, 105 W) Storage Controller P410i/512 BBWC P410i/512 BBWC P410i/512 BBWC P410i/512 BBWC Total Memory HP 64GB PC38 500 R 4x16GB 4Rank Memory HP 64GB PC38 500 R 4x16GB 4Rank Memory HP 128GB PC 3 106 00 R... 3 90 8.1.7 TEMS_ Collectors_Events 398 Enabling FILESTREAM in SQL Server 200 8 R2 404 Index 409 User' s Guide Tems Contents  ix Getting Started Welcome to TEMS Discovery! TEMS Discovery

Ngày đăng: 18/10/2018, 21:47

Từ khóa liên quan

Mục lục

  • 1 Getting Started

    • 1.1 Contact Information

    • 1.2 TEMS Discovery Startup Window

    • 1.3 System Requirements

      • 1.3.1 Software Requirements

      • 1.3.2 Hardware Requirements

        • 1.3.2.1 Hardware Requirements – TEMS Discovery Professional

        • 1.3.2.2 Hardware Requirements – TEMS Discovery Enterprise

        • 1.4 Terminology

        • 1.5 Data Archive vs. Export vs. Sharing

        • 1.6 A Few Tips

        • 1.7 Demo Documents

        • 1.8 Demo Project

        • 1.9 Walk-U-Through

        • 1.10 Creating Projects from Scratch

        • 1.11 Get Your Algorithm Working

        • 1.12 Generate Reports As You Wish

        • 2 Overview

          • 2.1 Main Window

            • 2.1.1 Data List and Progress Log Panel

            • 2.1.2 Data Explorer Panel

            • 2.1.3 Synchronizable and Summary View Panel

            • 2.2 Menu Bar

              • 2.2.1 File Menu

              • 2.2.2 Views Menu

              • 2.2.3 Tools Menu

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan