Centrifugal and rotary pumps 1999 nelik

132 212 0
Centrifugal and rotary pumps 1999   nelik

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

... Data Nelik, Lev Centrifugal and rotary pumps : fundamentals with applications / Lev Nelik p cm Includes bibliographical references and index ISBN 0-8493-0701-5 (alk paper) Centrifugal pumps Rotary. .. External Gear Pumps Internal Gear Pumps Sliding Vane Pumps Lobe Pumps 1999 CRC Press LLC Chapter Multiple-Screw Pumps Three-Screw Pumps Design and Operation Two-Screw Pumps Design and Operations... Institute Standards for Centrifugal, Rotary & Reciprocating Pumps, Parsippany, NJ, 1994 Russell, G Hydraulics, 5th ed., Henry Holt and Company, New York, 1942 Stepanoff, A J Centrifugal and Rotary Pumps,

Ngày đăng: 07/07/2018, 10:29

Từ khóa liên quan

Mục lục

  • cr0701fm.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Preface

      • Author

      • Acknowledgments

      • Table of Contents

  • cr0701ref.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • References

  • cr0701ch01.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 1: Introduction

  • cr0701ch02.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 2: Classification of Pumps

  • cr0701ch03.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 3: Concept of a Pumping System

        • Liquid Transfer

        • Input Power, Losses, and Efficiency

        • System Curve

        • Pump Curve

  • cr0701ch04.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 4: Centrifugal Pumps — Fundamentals

        • Affinity Laws

        • Helpful Formulas, per Centrifugal Pump Triangles

          • Quiz #1 — Velocity Triangles

            • Solution to Quiz #1

        • Performance CurveS

          • Quiz #2 — How Much Money Did a Maintenance Mechanic Save His Plant?

            • Solution to Quiz #2

        • Performance Modifications

          • Quiz #3 — A Valve Puzzle

            • Answer to Quiz #3:

        • Underfiling and Overfiling

        • Design Modeling Techniques

        • Specific Speed (Ns)

  • cr0701ch05.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 5: Gear Pumps — Fundamentals

        • Quiz #4 — Gear Pump Capacity

          • Solution to Quiz #4

        • Cavitation in Gear Pumps

        • Trapping Methods

        • Lubrication

        • User Comments

          • External Gear Pumps

          • Internal Gear Pumps

          • Sliding Vane Pumps

          • Lobe Pumps

  • cr0701ch06.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 6: Multiple-Screw Pumps

        • Three-Screw Pumps

          • Design and Operation

        • Two-Screw Pumps

          • Design and Operations

        • User Comments

  • cr0701ch07.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 7: Progressing Cavity (Single-Screw) Pumps

        • Principle of Operation

        • Pump Performance Considerations

        • Power Requirements

        • Fluid Velocity and Shear Rate

        • Fluid Viscosity

        • Inlet Conditions

          • Suction Lift

          • High Vapor Pressure Fluid

          • Vacuum Pot Installations

        • Guidance for Proper Selection and Installation

          • Abrasion

            • Particles

            • Carrier Fluids

          • Temperature Effects and Limits

          • Mounting and Vibration

          • The Drive Frame

        • Progressing Cavity Pump Applications

        • Troubleshooting

        • User Comments

  • cr0701ch08.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 8: Metering Pumps

        • Definition

        • Features

        • Where are Metering Pumps Used?

        • Types of Metering Pumps

        • Components of Metering Pumps

          • The Power End or Drive

          • Power Conversion or Drive Mechanisms

            • Reciprocating Design

            • Rotary Design

          • Pump Mechanism (Pump Head Module)

            • Packed Plunger Pumps and Piston Pumps

            • Diaphragm Pumps

            • Gear Pumps for Metering Applications

            • Peristaltic Tubing Pumps

            • Rotating/Reciprocating Valveless Pumps

        • Metering Pumps Selection

        • Control and Integration

        • Accessories

        • Typical Applications

  • cr0701ch09.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 9: The Advantages of Rotary Pumps

  • cr0701ch10.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 10: Case History #1 — Double-Suction Centrifugal Pump Suction Problems

        • Quiz #5 — are Ns and Nss Dependent on Speed?

          • Solution to Quiz #5

  • cr0701ch11.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 11: Case History #2 — Lube Oil Gear Pump: Noise and Wear Reduction

        • Quiz #6 — Double Gear Pump Life in Ten Minutes?

          • Solution to Quiz #6

  • cr0701ch12.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 12: Case History #3 — Progressing Cavity Pump Failures

  • cr0701ch13.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 13: Troubleshooting “Pointers” as Given by Interviewed Pump Users and Plant Personnel

  • cr0701ch14.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 14: Application Criteria and Specification Parameters

        • Application Point #1: Pump Type — Specific Speed Criterion (Ns)

        • Application Point #2 — Within the Pump Type

        • Application Point #3 — Flow/Pressure

        • Application Point #4 — Viscosity

        • Application Point #5 — Chemistry and Materials of Construction

        • Application Point #6 — Abrasiveness

        • Application Point #7 — Temperature

        • Application Point #8 — Self-Priming

        • Application Point #9 — Driver

        • Application Point #10 — Food Applications

  • cr0701ch15.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Chapter 15: Closing Remarks

  • cr0701apa.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Appendix A: Nomenclature

  • cr0701apb.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Appendix B: Conversion Formulas

  • cr0701apc.pdf

    • Centrifugal and Rotary Pumps: Fundamentals with Applications

      • Contents

      • Appendix C: Rotary Pump Coverage Guide

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan