Tranning report in MY

22 46 0
  • Loading ...
1/22 trang

Thông tin tài liệu

Ngày đăng: 15/04/2018, 01:20

Tối 144, cơ quan CSĐT Công an tỉnh Vĩnh Phúc đang khám nghiệm hiện trường, khám nghiệm tử thi vụ trọng án xảy ra trên địa bàn xã Đạo Tú, huyện Tam Dương. Trước đó khoảng 20h cùng ngày, một bé trai 8 tuổi được phát hiện tử vong với vết chém sau gáy REPORT BÁO CÁO Dep / Sec: Date: Ban/ Bộ phận Ngày: Position: Annex: Chức vụ : Phụ lục: Title: DD Ngày MM Thán g YY Năm LAB CHEMICAL MANAGEMENT Tiêu đề: Observe hood room: has ventilated system, include - Fume hood cupboard: there are two cupboard 1: prepare chemical 2: put electric cooker & refrigerating system… - Waste containers Classify waste: there are three type, consist of organic waste, inorganic waste and halogenated waste All are kept in separate waste containers with label and are put in a well – ventilated room Monthly remove waste to regulation place or when waste container is full - Chemical room: inside room include Chemical lists COA and MSDS documents Temperature & humidity utilization record Fire extinguisher Chemical cabinets with chemical list is pasted on door Regulation for using chemical Classify & storage chemical (How to arrange chemical): there are two form: solid & liquid Solid form: Category: poison/toxic & normal analytic chemical Poison/toxic chemicals: to be stored separately in ventilate cabinet with lock & key and this cabinet is put in room that has temperature & humidity control daily Normally analytic chemicals: to be stored in designed cabinet Total chemicals are arranged follow alphabet character Liquid form: Category: Poison/toxic, corrosive, flammable, harmful, irritant To be stored separately in cabinets to avoid interact Comment Chú thích Follow me: + Liquid form: they can be put (stored) in a cabinet with separately sites (shelves) For example: one cabinet has shelves, above shelf put flammable, middle shelf put corrosive and bottom shelf put irritant… + Classify waste: type, consist of organic waste & inorganic waste (Asst) Section Manager (Asst) Department Manager General Manager General Director (Trợ lý) Trưởng Khu vực ( Trợ lý ) Trưởng Bộ phận Giám Đốc Tổng Giám Đốc DD Ngày MM Tháng YY Năm DD Ngày MM Tháng YY Năm DD Ngày MM Tháng YY Năm DD Ngày MM Tháng YY Năm REPORT BÁO CÁO Dep / Sec: Date: Ban/ Bộ phận Ngày: Position: Annex: Chức vụ : Phụ lục: Title: DD Ngày MM Thán g YY Năm VOLUMETRIC SOLUTION, TEST SOLUTION AND BUFFER SOLUTION CONTROL Tiêu đề: - Observe label: the same size for all labels; separate label color for volumetric solution (white), test solution (pink) & buffer solution (yellow) On label must have signature of prepare staff and QC supervisor or above - For V.S: observe valid date (6 months) and re-standardization date (2 months) - Record for VS, TS, BS stock control: For solutions only use time: remove after using No need control record For solutions use a lot times: after using, record the total volume use in stock control form (establish notebook) - Storage reagent after preparing: to be kept on individual shelves (if need, reagent can be arranged follow alphabet character to looking for easily - All reagents are stored in suitable containers (plastic, amber, glass bottle…) and must be tightly closed Follow me: + Not yet have record to estimate re-standardization date, they depend on every volumetric solution (follow company: re-standardization date is months) + Not control buffer solution It is prepared enough for time test + Classify: Volumetric solution, Test solution, Indicator Execution: Weighing & Titration: Weigh accurately 0.15mg of primary standard Anhydrous Sodium Carbonate Dissolve it in 100ml of water and ass drops of Methyl Red Ts Titration slowly form burette of 0.1N HCl VS with constant stirring, until the solution becomes faintly pink Repeat for 10 times Calculate the RSD titration vol and sample weight Result: Factor K of 0.1N HCl VS = 1.0260 (The Acceptance limit: 0.970 ÷ 1.030) No Comment Chú thích Average RSD 1000C: use oil to test Temperature set ≤ 1000C: use raw water to test Read and discuss SOPs: - Sop for sop - Sop for GMP –Related coding system - Sop for handling finished product, raw material and stability studies sample - Sop for good laboratory practice - Sop for finished product retained sample - Sop for finished product stability study - Sop for finished product retained sample quality monitoring Dossiers for QC section (include protocol & report): - IQ, OQ & PQ validation of HVAC system - IQ, OQ & PQ validation of Water system - Water and environmental Monitoring - IQ, OQ & PQ validation of equipments - Equipments verification - Glassware verification - Subculture microorganism control - Culture medium validation - OOS result investigation - Chemical management - VS, TS, BS solution control - Reference standards, working standard & impurity standard control and management - Handling of wastes (collect & dispose of wastes) - Testing of Raw material, packing material & finished product - Raw material & Finished product retained sample - Finished product stability study - Training record - Analytical method validation - Cleaning Validation (consist of Microbiology & chemical) - Productive Process Validation - Bioassay (calculation software for antibiotic potency) - SOP for operation equipments - Specification of Raw material, packing material & finished product - Instrument utilization record MM Thán g YY Năm YY Năm REPORT Comment Chú thích BÁO CÁO (Asst) Section Manager (Asst) Department Manager General Manager General Director (Trợ lý) Trưởng Khu vực ( Trợ lý ) Trưởng Bộ phận Giám Đốc Tổng Giám Đốc DD Ngày MM Tháng YY Năm DD Ngày MM Tháng YY Năm DD Ngày MM Tháng YY Năm DD Ngày MM Tháng YY Năm ... Y.S.P WATER SYSTEM MONITORING Sampling points: Original point and point of use Sampling procedure: - Prepare sampling instruments - Sampling: + Disinfect the tap using sterilize 700 alcohol +... SAMPLING PROCEDURE (HOW TO SAMPLING) - Separate path of sample (RM) and path of human (changing R sampling R….) Using LAF with A class to sampling: inside LAF put table, balance and other instruments... bring any effect to the manufacturing process and the quality of the finish product Head of QC shall initiate a system Incident Report for approve of release OOS raw material Handling of finished
- Xem thêm -

Xem thêm: Tranning report in MY, Tranning report in MY

Gợi ý tài liệu liên quan cho bạn

Nhận lời giải ngay chưa đến 10 phút Đăng bài tập ngay