PD sheet toftejorg TJ 20g EN

4 39 0
  • Loading ...
1/4 trang

Thông tin tài liệu

Ngày đăng: 14/04/2018, 14:56

ky Award-Winning Design Toftejorg TJ 20G Rotary Jet Head Application The Toftejorg TJ 20G rotary jet head provides 3D indexed impact cleaning over a defined time period It is automatic and represents a guaranteed means of achieving quality assurance in tank cleaning Used in breweries, food and dairy processes and many other industries, the device is suitable for processing, storage and transportation tanks and vessels between 15 and 150 m3 The award-winning design is particularly suitable for hygienic industries that follow European Hygienic Equipment Design Group guidelines Working principle The flow of the cleaning fluid makes the nozzles perform a geared rotation around the vertical and horizontal axes In the first cycle, the nozzles lay out a coarse pattern on the tank surface The subsequent cycles gradually make the pattern more dense, until a full pattern is reached after cycles TECHNICAL DATA Lubricant: Standard Surface finish: Max throw length: Impact throw length: Standard thread: PHYSICAL DATA Self-lubricating with the cleaning fluid Exterior surface finish Ra 0,5µm - 14 m - m 1” Rp (BSP) or NPT, female Top cone 1” Rp (BSP) with sanitary seal Pressure Working pressure: 3-8 bar Recommended pressure: 5-6.5 bar Temperature Max working temperature: 95°C Max ambient temperature: 140°C Weight: 5.1 kg Caution Avoid hard and abrasive particles in the cleaning liquid, as this can cause increased wear and/or damage of internal mechanisms In general, a filter in the supply line is recommended Do not use for gas evacuation or air dispersion Cleaning Pattern First cycle Materials 316L (UNS S31603), Duplex steel (UNS N31803), Duplex steel (UNS S 21800), EPDM, PEEK, PVDF, PFA Full pattern The above drawings show the cleaning pattern achieved on a cylindrical horizontal vessel The difference between the first cycle and the full pattern represents the number of additional cycles available to increase the density of the cleaning Certificates 2.2, 3.1 material certificate and ATEX Flow Rate Nozzles mm m3/h Impact Throw Length Nozzles mm m 4108-0000 4108-0001 l/min 4xø5.5 250 15 15 4xø5.5 A 4xø4.6 4xø4.6 A 200 4xø3.9 10 A 10 4xø3.9 Flow rate 150 Throw length 100 4xø5.5 4xø4.6 4xø3.9 B 5 B B 50 bar Inlet pressure bar Inlet pressure A: Wetting - B: Impact cleaning Distillery version - flow at bar / 72.5 PSI x ø3,9 = 10 (m3/h) x ø4,6 = 12,4 (m3/h) x ø5,5 = 13,9 (m3/h) Dimensions (mm) Min RPM of machine body Nozzles mm 4108-0003 PTM RPM A 2.5 B 15 F 3.5 10 E C 3.0 D 4.0 4.5 5.0 6.0 4xø5.5 4xø4.6 7.0 8.0 4108-0002 G A 173 4xø3.9 H B 230 C 75 bar Inlet pressure D 133 E ø110 F max 25 G ø150 H ø200 Standard Design The choice of nozzle diameters can optimise jet impact length and flow rate at the desired pressure The Toftejorg TJ 20G is also available with PEEK impeller A welding adaptor with sealing for 1” ISO, 1” ANSI, 1/2” ISO Dairy Pipe or 1/2” SWG Pipe is available as an accessory The sanitary construction of the Toftejorg TJ20G is designed, with the aim to meet both European and American standards and regulations, such as EHEDG, USDA, USFDA, 3A etc The TJ20G has been tested according to the EHEDG test procedure on cleanbility and in-line steam sterilisability As standard documentation, it can be supplied with a "Declaration of Conformity" for material specifications Special distillery version available - see ordering leaflets Options Electronic rotation sensor to verify 3D coverage TRAX simulation tool TRAX is a unique software that simulates how the Toftejorg TJ 20G performs in a specific tank or vessel The simulation gives information on wetting intensity, pattern mesh width and cleaning jet velocity This information is used to determine the best location of the tank cleaning machine and the correct combination of flow, time and pressure to implement A TRAX demo containing different cleaning simulations covering a variety of applications can be used as reference and documentation for tank cleaning applications The TRAX demo is free and available upon request Wetting Intensity (US gallon/ft2) 0.06 2.5 0.07 2.9 0.08 3.4 0.09 3.9 0.11 4.5 0.13 5.3 0.15 6.1 0.17 7.1 0.20 8.3 0.24 9.6 0.27 11 0.32 13 0.37 15 TD 523-208 D4.6m H5.5m, Toftejorg TJ 20G, x ø5.5 mm, Time = 2.08 min., Water consumption = 403 l D4.6m H5.5m, Toftejorg TJ 20G, x ø5.5 mm, Time = 8.3 min., Water consumption = 1612 l Alfa Laval reserves the right to change specifications without prior notification ALFA LAVAL is a trademark registered and owned by Alfa Laval ESE00326EN 1201 How to contact Alfa Laval Contact details for all countries are continually updated on our website Please visit www.alfalaval.com to access the information direct Corporate AB © Alfa Laval ... construction of the Toftejorg TJ2 0G is designed, with the aim to meet both European and American standards and regulations, such as EHEDG, USDA, USFDA, 3A etc The TJ2 0G has been tested according... Wetting Intensity (US gallon/ft2) 0.06 2.5 0.07 2.9 0.08 3.4 0.09 3.9 0.11 4.5 0.13 5.3 0.15 6.1 0.17 7.1 0.20 8.3 0.24 9.6 0.27 11 0.32 13 0.37 15 TD 52 3-2 08 D4.6m H5.5m, Toftejorg TJ 20G, x ø5.5... Nozzles mm m3/h Impact Throw Length Nozzles mm m 410 8-0 000 410 8-0 001 l/min 4xø5.5 250 15 15 4xø5.5 A 4xø4.6 4xø4.6 A 200 4xø3.9 10 A 10 4xø3.9 Flow rate 150 Throw length 100 4xø5.5 4xø4.6 4xø3.9
- Xem thêm -

Xem thêm: PD sheet toftejorg TJ 20g EN, PD sheet toftejorg TJ 20g EN

Gợi ý tài liệu liên quan cho bạn

Nhận lời giải ngay chưa đến 10 phút Đăng bài tập ngay