8600 Smart Routers Hardware Installation Guide 76.8600-40039M 29.07.2015 Document Information Revision History Document No Date Description of Changes 76.8600-40039M 29.07.2015 Warning added to the 8660 Smart Router R1 Fan Module Upgrade Kit CFP2 transceivers specifications and installation instructions added in 9.6 CFP2 Used in 8600 System Updates applied in 9.8 Installation of Pluggable Transceivers Added the support of 8665 Smart Router and 8615 Smart Router stacked Added: 3.1 8665 Smart Router Subrack Installation, 3.3.1 8615 Smart Router Stacked Installation, 8665 Smart Router LU1 and SU1 Installation Reworked 14.1 ESW Shutdown Operation Information about replacing an IFC1 added in 14.3 Replacing CDC, SCM or Line Cards 76.8600-40039L 03.11.2014 8615 Smart Router added Chapter Interface Numbering and Legal Modules added Chapter 9.7 GNSS SFP added 81.86T-SM3TX01Q-R6 and 81.86T-SM3TX02R-R6 SFPs added to chapter 9.3 SFPs Used in 8600 System Note regarding electrical SFPs added to 9.2 Electrical Transceivers Addition on circuit breaker in 12.1 8602 Smart Router Power Installation Changes to the document structure 8600 Smart Routers Hardware Installation Guide 76.8600-40039M © 2015 Coriant Document No Date Description of Changes 76.8600-40039K 04.06.2014 8602 Smart Router added GNSS SFP added in 10 Installation of GNSS SFP 76.8600-40039J 27.03.2014 Related documentation updated in 8600 Smart Routers Technical Documentation AC power installation note added to chapter Safety Notes CDC2 control card data added and corresponding changes applied in 8.3 8630 Smart Router and 8660 Smart Router Line Card and CDC Assembly with New Captive Screws and New Ejector Levers, 11 Grounding, Appendix: Site Survey Added hot insertion of line modules and corresponding updates applied in 14.5.5 Replacing Line Module Supporting Hot Insertion with Different Typeand 14.5.6 Adding Line Module Supporting Hot Insertion to an Empty Slot Chapter 13.6 Communication Link Cabling restructured and updated Added support of 1x10GBASE-R HM and updates made in 6.3 8609 Smart Router and 8611 Smart Router Physical Line Module Installation and 13.3 Optical Cabling ELC1 and 8x100/1000BASE-X R2 IFM electrical 1000BASE-T SFP update in chapter 9.3 SFPs Used in 8600 System 8611 Smart Router XFP support updated in chapter 9.5 XFP Used in 8600 System Chapter 8.1 Upgrading Power Feeding of 8660 Smart Router R2 from Protected CDC Feeding to Protected PIM Feeding updated New chapter 14.15 Fiber Optic Cleaning ESW file naming information updated in chapter 16 ESW Downloading Note added to 13.2.6 Balun Panels regarding PS404-0002 front panel SCI/SCO pinout added to 13.5.3 8611 Smart Router and 13.5.4 8609 Smart Router and 8615 Smart Router This manual documents the following network elements: 8602 Smart Router 8605 Smart Router 8607 Smart Router 8609 Smart Router 8611 Smart Router 8615 Smart Router 8620 Smart Router 8630 Smart Router 8660 Smart Router 8665 Smart Router The functionality described in this document for 8615 Smart Router is also applicable to 8615 Smart Router stacked, unless otherwise stated © 2015 Coriant All rights reserved This manual is protected by U.S and international copyright laws, conventions and treaties Your right to use this manual is subject to limitations and restrictions imposed by applicable licenses and copyright laws Unauthorized reproduction, modification, distribution, display or other use of this manual may result in criminal and civil penalties The specifications and information regarding the products in this manual are subject to change without notice All statements, information, and recommendations in this manual are believed to be accurate but are presented without warranty of any kind, express or implied Users must take full responsibility for their application of any products Adobe ® Reader ® are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries 8600 Smart Routers Hardware Installation Guide 76.8600-40039M © 2015 Coriant Document Information Terms and Abbreviations Term Explanation ATM Asynchronous Transfer Mode CD Carrier Detect CDC Control and DC Power Card (used in 8630 Smart Router and 8660 Smart Router) CLI Command Line Interface Com Common Control card The control card in the 8600 system consists of a Control and DC Power Card CDC (used in 8630 Smart Router and 8660 Smart Router), Switching and Control Module SCM (used in 8611 Smart Router) In 8000 Intelligent Network Manager and CLI referred to as unit 76.8600-40039M © 2015 Coriant CPU Central Processor Unit CTS Clear To Send CU Control Functionality (used in 8615 Smart Router and 8665 Smart Router) DSR Data Set Ready DTR Data Terminal Ready ELC1 Ethernet Line Card (used in 8630 Smart Router and 8660 Smart Router) EMC Electromagnetic Compatibility EMI Electromagnetic Interference ESD Electrostatic Discharge ESW Embedded Software Fan One fan in a fan module Fan Module A module consisting of two or more fans, the mechanics and possibly the control electronics FTP Foil Shielded Twisted Pair GE Gigabit Ethernet GND Ground HM High Speed Module (used in 8611 Smart Router) IFC Interface Module Concentrator (used in 8630 Smart Router and 8660 Smart Router) IFM Interface Module A specific term of the module which can be placed on the IFC line card or 8620 Smart Router baseboard and which consists of the physical interfaces (used in 8620 Smart Router, 8630 Smart Router and 8660 Smart Router) IP Internet Protocol LAN Local Area Network LED Light-Emitting Diode 8600 Smart Routers Hardware Installation Guide Document Information Line card The line card in the 8600 system consists of an Ethernet Line Card (ELC1), Interface Module Concentrator (IFC) and up to two Interface Modules (IFMs) (used in 8630 Smart Router and 8660 Smart Router) In 8000 Intelligent Network Manager and CLI referred to as unit LM Line Module (used in 8607 Smart Router, 8609 Smart Router and 8611 Smart Router) LNA Low Noise Amplifier LU Traffic Functionality (used in 8615 Smart Router and 8665 Smart Router) MGMT Management port MO Mobile Optimization (Interface Module) MS Multiservice (Interface Module) NC Normally Closed NE Network Element NO Normally Open NRTL Nationally Recognized Testing Laboratory OCXO Oven Controlled Crystal Oscillator Operating temperature The operating temperature or temperature range refers to the ambient temperature of the telecommunications installation OSPF Open Shortest Path First PDF Power Distribution Field PKG Software package file POS Packet over SDH/Sonet RTS Request To Send RxD Receive Data SCM Switching and Control Module (used in 8611 Smart Router) SDH Synchronous Digital Hierarchy SEC SDH Equipment Clock SFP Small Form-Factor Pluggable Transceiver type used in 8600 IFMs and HM STP Shielded Twisted Pair TxD Transmit Data UTP Unshielded Twisted Pair 8600 Smart Routers Hardware Installation Guide 76.8600-40039M © 2015 Coriant Document Information Compliance Statement Hereby, Coriant Oy declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and Directive 2011/65/EU FCC Notification Statement Federal Communications Commission (FCC) Rules require that you be notified of the following: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by Coriant Operations, Inc., in writing can void the user’s authority to operate the equipment 8602 Smart Router and 8605 Smart Router have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules Industry Canada Notification Statement Industry Canada interference-causing equipment regulations require that you be notified of the following: This Class A digital apparatus complies with Canadian ICES-003 Cet appareil numérique de la classe A est conforme la norme NMB-003 du Canada 76.8600-40039M © 2015 Coriant 8600 Smart Routers Hardware Installation Guide 8600 Smart Routers Hardware Installation Guide 76.8600-40039M © 2015 Coriant Table of Contents Table of Contents About This Manual 16 Objectives 16 Audience 16 8600 Smart Routers Technical Documentation 16 Document Conventions 19 Documentation Feedback 19 8600 Smart Routers Discontinued Products 20 Safety Notes 21 Intended Purpose 21 Class Laser Product 21 Jewelry Removal 22 Installation and Maintenance 22 Lightning Activity 24 Overview 25 1.1 1.2 1.3 1.4 1.5 Site Survey 25 ESD 26 Unpacking Equipment 26 Packing for Transportation 27 Required Accessories 27 Interface Numbering and Legal Modules 30 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 8602 Smart Router IF Numbering 30 8605 Smart Router IF Numbering 30 8607 Smart Router IF Numbering 31 8609 Smart Router IF Numbering 31 8611 Smart Router IF Numbering 32 8615 Smart Router IF Numbering 32 8615 Smart Router Stacked IF Numbering 33 8620 Smart Router IF Numbering 33 8630 Smart Router IF Numbering 34 76.8600-40039M © 2015 Coriant 8600 Smart Routers Hardware Installation Guide Table of Contents 2.10 8660 Smart Router IF Numbering 35 2.11 8665 Smart Router IF Numbering 36 Network Element Installation on Rack/Cabinet 38 3.1 3.2 3.3 3.4 3.5 3.6 Network Element Installation on Vertical Surface 54 4.1 4.2 4.3 4.4 8607 Smart Router Fan Module Installation 75 8609 Smart Router, 8611 Smart Router and 8615 Smart Router Fan Module Installation 76 Physical Module Installation 79 6.1 6.2 6.3 8605 Smart Router and 8607 Smart Router Installation on Wall 54 8602 Smart Router Outdoor Installation on Wall 55 4.2.1 Attaching the Carrying Handle to the 8602 Smart Router chassis 56 4.2.2 8602 Smart Router Instructions for Outdoor Installation on Wall 56 4.2.3 8602 Smart Router Sun Cover Installation 61 8602 Smart Router Outdoor Installation on Pole 63 8602 Smart Router Indoor Installation on Wall 67 4.4.1 Attaching the Carrying Handle to the 8602 Smart Router chassis 68 4.4.2 8602 Smart Router Instructions for Indoor Installation on Wall 68 4.4.3 8602 Smart Router Sun Cover Installation 73 Fan Module Installation 75 5.1 5.2 8665 Smart Router Subrack Installation 39 8660 Smart Router and 8630 Smart Router Subrack Installation 41 8615 Smart Router Installation on Rack/Cabinet 45 3.3.1 8615 Smart Router Stacked Installation 46 8602 Smart Router Indoor Installation on Rack/Cabinet 47 8605 Smart Router, 8607 Smart Router, 8609 Smart Router and 8611 Smart Router Installation on Rack/Cabinet 50 8620 Smart Router Installation on Rack/Cabinet 53 8607 Smart Router Line Module Installation 79 8611 Smart Router SCM Installation 80 8609 Smart Router and 8611 Smart Router Physical Line Module Installation 82 6.3.1 8611 Smart Router High Speed Module Installation 83 6.3.2 8609 Smart Router and 8611 Smart Router Line Module Installation 83 8665 Smart Router LU1 and SU1 Installation 85 7.1 Installing Units 85 7.1.1 Installation of LU1 85 7.1.2 Installation of SU1 88 8600 Smart Routers Hardware Installation Guide 10 76.8600-40039M © 2015 Coriant ... conforme la norme NMB-003 du Canada 76. 8600- 40039M © 2015 Coriant 8600 Smart Routers Hardware Installation Guide 8600 Smart Routers Hardware Installation Guide 76. 8600- 40039M © 2015 Coriant Table of... fi-documentation@tellabs.com 76. 8600- 40039M © 2015 Coriant 8600 Smart Routers Hardware Installation Guide 19 8600 Smart Routers Discontinued Products 8600 Smart Routers Discontinued Products 8600 Smart Routers Manufacture... 8600 Smart Routers Hardware Installation Guide 18 76. 8600- 40039M © 2015 Coriant About This Manual Document Title Description 8600 Smart Routers Test and Measurement Configuration Guide (76. 8600- 50124)