Đang tải... (xem toàn văn)
Weld using gas metal arc welding process (GMAW) GMAW undertaken autonomously or within a team environment using predetermined standards of quality, safety, work and welding procedures and the skills applied to a range of fabrication activities. A range of material suitable to heavy or light fabrication is used. Fillet and butt welds in all positions on a range of materials that may include carbon steel or stainless steel, etc. As a guide, welds produced to the standard of this unit would typically conform to Australian Standard 1554 General purpose, American Bureau of Shipping (ABS) or equivalent. Preparation of materials may include preheating, setting up of jigs, fixtures, clamps, etc. Remedial action using thermal processes may include oxyacetylene and air arc equipment. Grinding devices may also be used. Where thermal processes, hand andor power tools are required the appropriate specialisation units should be accessed.
... DOWN HAND 5.17A Weld using gas metal arc welding process (GMAW) Weld positions Reproduced with the kind permission of BOC 5.17A Weld using gas metal arc welding process (GMAW) Weld types Reproduced... symbol 10mm fillet weld other side 6mm fillet weld arrow side 10 GMAW Weld on site Weld all round Use the gas metal arc welding process 5.17A Weld using gas metal arc welding process (GMAW) Meaning... 5.17A Weld using gas metal arc welding process (GMAW) Fillet weld terms Parent Metal Leg Length Reinforcement Weld Metal Toe Fusion Zone Penetration Heat Effected Zone 5.17A Weld using gas metal arc