Đang tải... (xem toàn văn)
Table of contents This document has 86 pages. Summary of changes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1 CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2 Flexi Multiradio BTS FCC Part 15 compliance. . . . . . . . . . . . . . . . . . . . 12 3 Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.1 Environmental specifications and requirements for a standalone BTS 13 3.2 Installations with cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3.3 Environmental specifications and requirements for modules in FCIA . . 17 3.4 Environmental specifications and requirements for modules in FCOA without air filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3.5 Environmental specifications and requirements for modules in FCOA with air filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3.6 Environmental specifications and requirements for modules in Flexi Mounting Shield (FMSAFMSB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.7 Environmental specifications and requirements for Remote Radio Head . 25 3.8 Safety distance requirements (compliance boundaries) . . . . . . . . . . . . 26 3.9 Compliance with EMC, RF and safety. . . . . . . . . . . . . . . . . . . . . . . . . . 33 4 Site requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 4.1 Planning and preparing the site. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 4.2 General site requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 4.2.1 Indoor site requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 4.3 Feederless site and Distributed site solution requirements. . . . . . . . . . 37 4.4 Pole installation requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 4.5 Floor installation requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 4.6 Wall installation requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 4.7 Module clearances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 4.8 Flexi Cabinet for Indoor (FCIA) clearances and anchoring holes . . . . . 49 4.9 Flexi Cabinet for Outdoor (FCOA) clearances and anchoring holes . . . 52 4.10 Flexi Mounting Shield (FMSA and FMSB) clearances and anchoring holes 55 5 Power requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 5.1 Site earth and BTS grounding requirements . . . . . . . . . . . . . . . . . . . . . 58 5.2 Mains power requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.3 BTS power consumption and battery backup times. . . . . . . . . . . . . . . . 66 5.4 Overvoltage protection properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 5.5 Lightning surge requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 6 Dimensions and weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 6.1 Module dimensions and weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 6.2 FCIA dimensions and weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 6.3 Flexi Cabinet for Outdoor (FCOA) dimensions and weight . . . . . . . . . . 81 6.4 Flexi Mounting Shield (FMSA and FMSB) dimensions and weights . . . 82 6.5 Flexi Power Rectifier (FPRx) dimensions . . . . . . . . . . . . . . . . . . . . . . . 83 4 DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements Id:0900d8058080e3a1 Confidential 7 Citytalk cabinet requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 8 Thirdparty cabinet requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Nokia Siemens Networks WCDMA RAN, Rel RU30, Operating Documentation, Issue 01 Flexi Multiradio BTS WCDMA Installation Site Requirements DN7037979 Issue 11 Approval Date 2010-12-10 Confidential Flexi Multiradio BTS WCDMA Installation Site Requirements The information in this document is subject to change without notice and describes only the product defined in the introduction of this documentation This documentation is intended for the use of Nokia Siemens Networks customers only for the purposes of the agreement under which the document is submitted, and no part of it may be used, reproduced, modified or transmitted in any form or means without the prior written permission of Nokia Siemens Networks The documentation has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it Nokia Siemens Networks welcomes customer comments as part of the process of continuous development and improvement of the documentation The information or statements given in this documentation concerning the suitability, capacity, or performance of the mentioned hardware or software products are given "as is" and all liability arising in connection with such hardware or software products shall be defined conclusively and finally in a separate agreement between Nokia Siemens Networks and the customer However, Nokia Siemens Networks has made all reasonable efforts to ensure that the instructions contained in the document are adequate and free of material errors and omissions Nokia Siemens Networks will, if deemed necessary by Nokia Siemens Networks, explain issues which may not be covered by the document Nokia Siemens Networks will correct errors in this documentation as soon as possible IN NO EVENT WILL Nokia Siemens Networks BE LIABLE FOR ERRORS IN THIS DOCUMENTATION OR FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA,THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT This documentation and the product it describes are considered protected by copyrights and other intellectual property rights according to the applicable laws The wave logo is a trademark of Nokia Siemens Networks Oy Nokia is a registered trademark of Nokia Corporation Siemens is a registered trademark of Siemens AG Other product names mentioned in this document may be trademarks of their respective owners, and they are mentioned for identification purposes only Copyright © Nokia Siemens Networks 2010 All rights reserved f Important Notice on Product Safety Elevated voltages are inevitably present at specific points in this electrical equipment Some of the parts may also have elevated operating temperatures Non-observance of these conditions and the safety instructions can result in personal injury or in property damage Therefore, only trained and qualified personnel may install and maintain the system The system complies with the standard EN 60950 / IEC 60950 All equipment connected has to comply with the applicable safety standards The same text in German: Wichtiger Hinweis zur Produktsicherheit In elektrischen Anlagen stehen zwangsläufig bestimmte Teile der Geräte unter Spannung Einige Teile können auch eine hohe Betriebstemperatur aufweisen Eine Nichtbeachtung dieser Situation und der Warnungshinweise kann zu Körperverletzungen und Sachschäden führen Deshalb wird vorausgesetzt, dass nur geschultes und qualifiziertes Personal die Anlagen installiert und wartet Das System entspricht den Anforderungen der EN 60950 / IEC 60950 Angeschlossene Geräte müssen die zutreffenden Sicherheitsbestimmungen erfüllen Id:0900d8058080e3a1 Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements Table of contents This document has 86 pages Summary of changes CE marking 11 Flexi Multiradio BTS FCC Part 15 compliance 12 3.1 3.2 3.3 3.4 Environmental requirements 13 Environmental specifications and requirements for a stand-alone BTS 13 Installations with cabinet 15 Environmental specifications and requirements for modules in FCIA 17 Environmental specifications and requirements for modules in FCOA without air filter 19 Environmental specifications and requirements for modules in FCOA with air filter 21 Environmental specifications and requirements for modules in Flexi Mounting Shield (FMSA/FMSB) 23 Environmental specifications and requirements for Remote Radio Head 25 Safety distance requirements (compliance boundaries) 26 Compliance with EMC, RF and safety 33 3.5 3.6 3.7 3.8 3.9 DN7037979 Issue 11 4.1 4.2 4.2.1 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 Site requirements 35 Planning and preparing the site 35 General site requirements 36 Indoor site requirements 36 Feederless site and Distributed site solution requirements 37 Pole installation requirements 42 Floor installation requirements 44 Wall installation requirements 46 Module clearances 48 Flexi Cabinet for Indoor (FCIA) clearances and anchoring holes 49 Flexi Cabinet for Outdoor (FCOA) clearances and anchoring holes 52 Flexi Mounting Shield (FMSA and FMSB) clearances and anchoring holes 55 5.1 5.2 5.3 5.4 5.5 Power requirements Site earth and BTS grounding requirements Mains power requirements BTS power consumption and battery backup times Overvoltage protection properties Lightning surge requirements 58 58 59 66 73 74 6.1 6.2 6.3 6.4 6.5 Dimensions and weights Module dimensions and weights FCIA dimensions and weight Flexi Cabinet for Outdoor (FCOA) dimensions and weight Flexi Mounting Shield (FMSA and FMSB) dimensions and weights Flexi Power Rectifier (FPRx) dimensions 77 77 80 81 82 83 Id:0900d8058080e3a1 Confidential Flexi Multiradio BTS WCDMA Installation Site Requirements Citytalk cabinet requirements 84 Third-party cabinet requirements 85 Id:0900d8058080e3a1 Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements List of figures Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 Figure 20 Figure 21 Figure 22 Figure 23 DN7037979 Issue 11 CE marking 11 Sea salt distribution over land masses 16 Area around the antenna 27 Antenna side and top view 28 Antenna connection to the BTS 29 Formula for safety distances 32 Wind load calculations, side view 42 Wind load calculations, front view 43 Anchoring the plinth on the floor 44 Anchoring the plinth on base with maintenance space in the back 45 Installation example: 3U modules on the wall 47 Minimum clearances around the stand-alone base station 48 Clearances around FCIA 50 FCIA fixing points, minimum clearances 50 FCIA fixing points with maintenance space in the back 51 Cabinet clearances and anchoring holes 53 FCOA cabinet bottom cable entry 54 FMSA fixing points 56 FMSB fixing points 57 3U module dimensions for rack assembly 78 3U module dimensions with covers 78 Remote Radio Head (FRGG) dimensions without Flexi RRH Solar Shield (FMGA) 79 Module level cooling in a third-party cabinet 86 Id:0900d8058080e3a1 Confidential Flexi Multiradio BTS WCDMA Installation Site Requirements List of tables Table Table Table Table Table Table Table Table Table Table 10 Table 11 Table 12 Table 13 Table 14 Table 15 Table 16 Table 17 Table 18 Table 19 Table 20 Table 21 Table 22 Table 23 Table 24 Table 25 Table 26 Table 27 Table 28 Table 29 Table 30 Table 31 Table 32 Table 33 Table 34 Table 35 Table 36 Table 37 Table 38 Table 39 Table 40 Climatic conditions for operation 13 Temperature and humidity values 13 Flexi Multiradio BTS sound power levels (measured according to ISO 3744) 14 Climatic conditions for operation 17 Temperature and humidity values 17 FCIA sound power level 17 Climatic conditions for operation 19 FCOA (without air filter) sound power level 19 Temperature and humidity values 20 Climatic conditions for operation 21 FCOA (with air filter) sound power level 21 Temperature and humidity values 22 Climatic conditions for operation 23 Temperature and humidity values 23 FMSA/FMSB sound power levels (measured according to ISO 3744) 23 Climatic conditions for operation 25 Temperature values for the RRH 25 Whole body SAR exclusion power levels 27 Dimensions of compliance boundary in meters (General Public) 28 Dimensions of compliance boundary in meters (occupational) 28 A detailed description of the components 30 A typical antenna specification 30 Basic restrictions 31 Reference values calculated from basic restrictions 31 Requirements for the optical interface in feederless site installations (max 200 m) 37 Requirements for the optical interface in distributed site installations (max 15 km) 37 DC cable lengths of the Feederless Site Concept when the System Module provides power supply in normal operation mode 38 The guaranteed DC cable lengths of the Feederless Site Concept according to ETSI EN300132 (BTS input voltage 40.5 -57 V) 39 Nokia Siemens Networks requirements for a shielded, locally sourced DC cable (3U RF Module), T=20C 40 Flexi Power AC/DC sub-module for Single RF Module (FPAB) 40 Area for wind load calculations 43 Area for wind load calculations (FMSA) 43 Required minimum clearances 48 Cabinet clearances 49 Cabinet clearances 52 FMSA clearances 55 FMSB clearances 55 Permitted operating voltage 59 Flexi WCDMA BTS Rel fuse rates for DC current 59 Flexi WCDMA BTS Rel (with 3-sector RF Module) fuse rates for DC Id:0900d8058080e3a1 Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements Table 41 Table 42 Table 43 Table 44 Table 45 Table 46 Table 47 Table 48 Table 49 Table 50 Table 51 Table 52 Table 53 Table 54 Table 55 Table 56 Table 57 Table 58 Table 59 Table 60 Table 61 Table 62 Table 63 Table 64 Table 65 DN7037979 Issue 11 current 60 Flexi WCDMA BTS Rel (with RRH) fuse rates for DC current 62 Flexi WCDMA BTS Rel fuse rates for AC current 62 Flexi WCDMA BTS Rel (with 3-sector RF Module) fuse rates for AC current 63 Flexi WCDMA BTS Rel (with RRH) fuse rates for AC current 64 Local AC power supply for the System Module and RF Module 65 Power consumption of Flexi System Modules and BBU times with FPMA 66 Power consumption of Flexi configurations and BBU times with FPMA 66 Power consumption of Flexi Outdoor Cabinet fans FCFA and FCSA 68 Typical and maximum power consumptions for Flexi Multiradio BTS WCDMA configurations 69 Overvoltage protection level in differential (Line – Line) mode 73 Overvoltage protection level in common (Line – Ground) mode 73 Switching and lightning transient requirements for AC power port 74 Surge immunity requirements for DC power port 74 Lightning surge immunity requirements with FSEC/FSES for DC power port 74 Lightning surge requirements for antenna ports 75 Lightning surge requirements for telecom ports 75 Surge requirements for alarm and control ports 76 Lightning surge requirements for Ethernet ports 76 Dimensions and weights of 3U modules and plinth 77 Dimensions and weight of the Remote Radio Head (FRGG) 78 Dimensions and weight of Flexi Cabinet for Indoor (FCIA) 80 Dimensions and weight of the Flexi Cabinet for Outdoor (FCOA) 81 Dimensions and weight of Flexi Mounting Shield 6U (FMSA) 82 Dimensions and weight of Flexi Mounting Shield 18U (FMSB) 82 Flexi Power Rectifier FPRA 83 Id:0900d8058080e3a1 Confidential Flexi Multiradio BTS WCDMA Installation Site Requirements Id:0900d8058080e3a1 Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements Summary of changes Summary of changes Changes between document issues are cumulative Therefore, the latest document issue contains all changes made to previous issues Changes between issues 10C and 11 Section Module dimensions and weights has been updated Section Overvoltage protection properties has been updated with FSES information Changes between issues 10B and 10C Flexi WCDMA BTS renamed as Flexi Multiradio BTS WCDMA throughout the document g In WCDMA application, Flexi Multiradio BTS refers to Multimode System Module (FSMC/D/E) and Multiradio RF Modules such as the FRGP Earlier hardware versions of Flexi BTS, such as the single mode System Module FSMB and Single and Dual RF Modules (for example FRIA and FRGC) are not part of the Flexi Multiradio BTS concept Tables Dimensions of compliance boundary in meters (General Public) and Dimensions of compliance boundary in meters (occupational) in section Safety distance requirements (compliance boundaries) updated Section Compliance with EMC, RF and safety updated Remote Radio Head (FRGG)-related information in section Pole installation requirements updated Figures in section Floor installation requirements updated Figures in section Flexi Cabinet for Indoor (FCIA) clearances and anchoring holes updated Figure 3U module dimensions for rack assembly in section Module dimensions and weights updated Table Dimensions of I-HSPA Adapter, including fan module in section I-HSPA Adapter dimensions and weight updated Changes between issues 10A and 10B Triple RF Module renamed as 3-sector RF Module throughout the document Section CE marking updated Sea salt distribution information added to section Installations with cabinet Tables Dimensions of compliance boundary in meters (General Public), Dimensions of compliance boundary in meters (occupational) and A detailed description of the components in section Safety distance requirements (compliance boundaries) updated Topic Safety in section Compliance with EMC, RF and safety updated Section Flexi Cabinet for Indoor (FCIA) clearances and anchoring holes updated Tables Overvoltage protection level in common (Line - Ground) mode and Overvoltage protection level in differential (Line - Line) mode in section Overvoltage protection properties updated Information about positive grounding added to section Site earth and BTS grounding requirements DN7037979 Issue 11 Id:0900d8058080e425 Confidential Summary of changes Flexi Multiradio BTS WCDMA Installation Site Requirements Tables Power consumption of Flexi modules and BBU times with FPMA and Typical and maximum power consumptions for Flexi WCDMA BTS configurations in section BTS power consumption and battery backup times updated Table Dimensions and weights of 3U modules and plinth in section Module dimensions and weights updated (FPBA/B and plinth) Section Flexi Cabinet for Indoor (FCIA) dimensions and weight updated Section Flexi Cabinet for Outdoor (FCOA) dimensions and weight updated Changes between issues 9-3 and 10A FPBB added to sections BTS power consumption and battery backup times and Module dimensions and weights 10 Id:0900d8058080e425 Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements The values not include the optional cabinet (FCOA) and optional site support (FCSA) power consumption For the microwave transmission sub-module case (FTFA), add max 70 W The estimated maximum heat load can be assumed to be the same as the power consumption values 72 Id:0900d8058073be8c Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements 5.4 Overvoltage protection properties Overvoltage protection properties of FSEC and FSES The requirements for overvoltage protection are described in the tables below • • • Supply voltage Nominal 48 V DC according to ETSI 300-132-2 Protection level Up (differential, i.e Line – Line) < 500 V (at In, / 20 us) Protection level Up (common, i.e Line – Ground) < 1000 V (at In, / 20 us) OVP Class II (C/T2) requirements for differential (Line – Line) mode Voltage protection level, Up [...]... Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements Site requirements 4 Site requirements 4.1 Planning and preparing the site Purpose Before installing the BTS, the site must be properly surveyed and prepared, and all required external connections must be correctly installed Any special requirements for installation must also be identified during the survey Steps 1 Check that the BTS can.. .Flexi Multiradio BTS WCDMA Installation Site Requirements CE marking 1 CE marking Figure 1 CE marking Hereby, Nokia Siemens Networks declares that this Base Station is in compliance with the essential requirements and other relevant provisions of Directive: 1999/5/EC DN7037979 Issue 11 Id:0900d80580664915 Confidential 11 Flexi Multiradio BTS FCC Part 15 compliance Flexi Multiradio BTS WCDMA Installation. .. DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements 3.3 Environmental specifications and requirements for modules in FCIA Flexi Multiradio BTS modules inside Flexi Cabinet for Indoor (FCIA) can operate as defined in the tables below Property Value Transportation requirements ETS 300 019-1-2, class 2.3 Storage requirements ETS 300 019-1-1, class 1.2 Operational requirements ETS... the Site Survey Report Sufficient service clearances are available Grounding busbar, Mains power (AC or DC, depending on the site) , Transmission connection point Id:0900d8058073bd15 Confidential 35 Flexi Multiradio BTS WCDMA Installation Site Requirements 4.2 General site requirements Ensure that the following BTS site requirements are met: 1 All required documentation is available, for example, site- specific... Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements 3.6 Environmental specifications and requirements for modules in Flexi Mounting Shield (FMSA/FMSB) Flexi Multiradio BTS modules installed inside Flexi Mounting Shield (FMSA/FMSB) cabinet can operate in the climatic conditions as defined in the table below Property Value Operational requirements ETSI 300 019-1-4,... Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements 3.4 Environmental specifications and requirements for modules in FCOA without air filter Flexi Multiradio BTS modules installed inside Flexi Cabinet for Outdoor (FCOA) can operate as defined in the tables below Property Value Transportation requirements ETSI 300 019-1-2, Class 2.3 Storage requirements ETSI 300 019-1-1,... DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements 3.5 Environmental specifications and requirements for modules in FCOA with air filter Flexi Multiradio BTS modules installed inside Flexi Cabinet for Outdoor (FCOA) with an optional air filter can operate as defined in the tables below Property Value Transportation requirements ETSI 300 019-1-2, Class 2.3 Storage requirements ETSI... the site construction work is finished and the site is clean and dry 10 Site security is established so the BTS and other units can remain undisturbed at the site 11 Make sure you can take the BTS to the installation site For example, in roof top installations, the hole through which you take the BTS to the roof must be large enough 4.2.1 Indoor site requirements If installing the BTS to an indoor site, ... particular installation Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment 12 Id:0900d805806f7567 Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements Environmental requirements 3 Environmental requirements 3.1 Environmental specifications and requirements for a stand-alone BTS Flexi. .. ISO 3744) (Cont.) Id:0900d8058073bc7e Confidential DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements 3.7 Environmental specifications and requirements for Remote Radio Head Property Value Transportation requirements ETSI 300 019-1-2, Class 2.3 Storage requirements ETSI 300 019-1-1, Class 1.2 Operational requirements ETSI 300 019-1-4, class 4.1 and IEC class 4M5 Wind driven ... DN7037979 Issue 11 Flexi Multiradio BTS WCDMA Installation Site Requirements Site requirements Site requirements 4.1 Planning and preparing the site Purpose Before installing the BTS, the site must be... Flexi Multiradio BTS WCDMA Installation Site Requirements Environmental requirements Environmental requirements 3.1 Environmental specifications and requirements for a stand-alone BTS Flexi Multiradio. .. Confidential 41 Flexi Multiradio BTS WCDMA Installation Site Requirements 4.4 Pole installation requirements The optional pole mounting kits VMPB and FPKA enable Flexi WCDMA BTS installation on