Preface The research field of robotics has been contributing widely and significantly to in- dustrial applications for assembly, welding, painting, and transportation for a long time. Meanwhile, the last decades have seen an increasing interest in developing and employing mobile robots for industrial inspection, conducting surveillance, urban search and rescue, military reconnaissance and civil exploration. As a special potential sub-group of mobile technology, climbing and walking ro- bots can work in unstructured environments. They are useful devices adopted in a variety of applications such as reliable non-destructive evaluation (NDE) and di- agnosis in hazardous environments, welding and manipulation in the construction industry especially of metallic structures, and cleaning and maintenance of high- rise buildings. The development of walking and climbing robots offers a novel so- lution to the above-mentioned problems, relieves human workers of their hazard- ous work and makes automatic manipulation possible, thus improving the techno- logical level and productivity of the service industry. Currently there are several different kinds of kinematics for motion on horizontal and vertical surfaces: multiple legs, sliding frames, wheeled and chain-track vehi- cles. All of the above kinematics modes have been presented in this book. For ex- ample, six-legged walking robots and humanoid robots are multiple-leg robots; the climbing cleaning robot features a sliding frame; while several other mobile proto- types are contained in a wheeled and chain-track vehicle. Generally a light-weight structure and efficient manipulators are two important is- sues in designing climbing and walking robots. Even though significant progress has been made in this field, the technology of climbing and walking robots is still a challenging topic which should receive special attention by robotics research. For example, note that previous climbing robots are relatively large. The size and weight of these prototypes is the choke point. Additionally, the intelligent technol- ogy in these climbing robots is not well developed. VI With the advancement of technology, new exciting approaches enable us to render mobile robotic systems more versatile, robust and cost-efficient. Some researchers combine climbing and walking techniques with a modular approach, a reconfigur- able approach, or a swarm approach to realize novel prototypes as flexible mobile robotic platforms featuring all necessary locomotion capabilities. The purpose of this book is to provide an overview of the latest wide-range achievements in climbing and walking robotic technology to researchers, scientists, and engineers throughout the world. Different aspects including control simula- tion, locomotion realization, methodology, and system integration are presented from the scientific and from the technical point of view. This book consists of two main parts, one dealing with walking robots, the second with climbing robots. The content is also grouped by theoretical research and ap- plicative realization. Every chapter offers a considerable amount of interesting and useful information. I hope it will prove valuable for your research in the related theoretical, experimental and applicative fields. Editor Dr. Houxiang Zhang University of Hamburg Germany 1 Mechanics and Simulation of Six-Legged Walking Robots Giorgio Figliolini and Pierluigi Rea DiMSAT, University of Cassino Cassino (FR), Italy 1. Introduction Legged locomotion is used by biological systems since millions of years, but wheeled locomotion vehicles are so familiar in our modern life, that people have developed a sort of dependence on this form of locomotion and transportation. However, wheeled vehicles require paved surfaces, which are obtained through a suitable modification of the natural environment. Thus, walking machines are more suitable to move on irregular terrains, than wheeled vehicles, but their development started in long delay because of the difficulties to perform an active leg coordination. In fact, as reported in (Song and Waldron, 1989), several research groups started to study and develop walking machines since 1950, but compactness and powerful of the existent computers were not yet suitable to run control algorithms for the leg coordination. Thus, ASV (Adaptive-Suspension-Vehicle) can be considered as the first comprehensive example of six-legged walking machine, which was built by taking into account main aspects, as control, gait analysis and mechanical design in terms of legs, actuation and vehicle structure. Moreover, ASV belongs to the class of “statically stable” walking machines because a static equilibrium is ensured at all times during the operation, while a second class is represented by the “dynamically stable” walking machines, as extensively presented in (Raibert, 1986). Later, several prototypes of six-legged walking robots have been designed and built in the world by using mainly a “technical design” in the development of the mechanical design and control. In fact, a rudimentary locomotion of a six-legged walking robot can be achieved by simply switching the support of the robot between a set of legs that form a tripod. Moreover, in order to ensure a static walking, the coordination of the six legs can be carried out by imposing a suitable stability margin between the ground projection of the center of gravity of the robot and the polygon among the supporting feet. A different approach in the design of six-legged walking robots can be obtained by referring to biological systems and, thus, developing a biologically inspired design of the robot. In fact, according to the “technical design”, the biological inspiration can be only the trivial observation that some insects use six legs, which are useful to obtain a stable support during the walking, while a “biological design” means to emulate, in every detail, the locomotion of a particular specie of insect. In general, insects walk at several speeds of locomotion with a Source: Climbing & Walking Robots, Towards New Applications, Book edited by Houxiang Zhang, ISBN 978-3-902613-16-5, pp.546, October 2007, Itech Education and Publishing, Vienna, Austria O pen Access Database www.i-techonline.co m Climbing & Walking Robots, Towards New Applications 2 variety of different gaits, which have the property of static stability, but one of the key characteristics of the locomotion control is the distribution. Thus, in contrast with the simple switching control of the “technical design”, a distributed gait control has to be considered according to a “biological design” of a six-legged walking robot, which tries to emulate the locomotion of a particular insect. In other words, rather than a centralized control system of the robot locomotion, different local leg controllers can be considered to give a distributed gait control. Several researches have been developed in the world by referring to both “cockroach insect”, or Periplaneta Americana, as reported in (Delcomyn and Nelson, 2000; Quinn et al., 2001; Espenschied et al., 1996), and “stick insect”, or Carausius Morosus, as extensively reported in (Cruse, 1990; Cruse and Bartling, 1995; Frantsevich and Cruse, 1997; Cruse et al., 1998; Cymbalyuk et al., 1998; Cruse, 2002; Volker et al., 2004; Dean, 1991 and 1992). In particular, the results of the second biological research have been applied to the development of TUM (Technische-Universität-München) Hexapod Walking Robot in order to emulate the locomotion of the Carausius Morosus, also known as stick insect. In fact, a biological design for actuators, leg mechanism, coordination and control, is much more efficient than technical solutions. Thus, TUM Hexapod Walking Robot has been designed as based on the stick insect and using a form of the Cruse control for the coordination of the six legs, which consists on distributed leg control so that each leg may be self-regulating with respect to adjacent legs. Nevertheless, this walking robot uses only Mechanism 1 from the Cruse model, i.e. “A leg is hindered from starting its return stroke, while its posterior leg is performing a return stroke”, and is applied to the ispilateral and adjacent legs. TUM Hexapod Walking Robot is one of several prototypes of six-legged walking robots, which have been built and tested in the world by using a distributed control according to the Cruse-based leg control system. The main goal of this research has been to build biologically inspired walking robots, which allow to navigate smooth and uneven terrains, and to autonomously explore and choose a suitable path to reach a pre-defined target position. The emulation of the stick insect locomotion should be performed through a straight walking at different speeds and walking in curves or in different directions. Therefore, after some quick information on the Cruse-based leg controller, the present chapter of the book is addressed to describe extensively the main results in terms of mechanics and simulation of six-legged walking robots, which have been obtained by the authors in this research field, as reported in (Figliolini et al., 2005, 2006, 2007). In particular, the formulation of the kinematic model of a six-legged walking robot that mimics the locomotion of the stick insect is presented by considering a biological design. The algorithm for the leg coordination is independent by the leg mechanism, but a three-revolute ( 3R ) kinematic chain has been assumed to mimic the biological structure of the stick insect. Thus, the inverse kinematics of the 3R has been formulated by using an algebraic approach in order to reduce the computational time, while a direct kinematics of the robot has been formulated by using a matrix approach in order to simulate the absolute motion of the whole six-legged robot. Finally, the gait analysis and simulation is presented by analyzing the results of suitable computer simulations in different walking conditions. Wave and tripod gaits can be observed and analyzed at low and high speeds of the robot body, respectively, while a transient behaviour is obtained between these two limit conditions. Mechanics and Simulation of Six-Legged Walking Robots 3 2. Leg coordination The gait analysis and optimization has been obtained by analyzing and implementing the algorithm proposed in (Cymbalyuk et al., 1998), which was formulated by observing in depth the walking of the stick insect and it was found that the leg coordination for a six- legged walking robot can be considered as independent by the leg mechanism. Referring to Fig. 1, a reference frame GĻ (xĻ G yĻ G zĻ G ) having the origin GĻ coinciding with the projection on the ground of the mass center G of the body of the stick insect and six reference frames O Si (x Si y Si z Si ) for i = 1,…,6, have been chosen in order to analyze and optimize the motion of each leg tip with the aim to ensure a suitable static stability during the walking. Thus, in brief, the motion of each leg tip can be expressed as function of the parameters Si p ix and s i , where Si p ix gives the position of the leg tip in O Si (x Si y Si z Si ) along the x-axis for the stance phase and s i ∈{0 ; 1} indicates the state of each leg tip, i.e. one has: s i = 0 for the swing phase and s i = 1 for the stance phase, which are both performed within the range [PEP i , AEP i ], where PEP i is the Posterior-Extreme-Position and AEP i is the Anterior-Extreme-Position of each tip leg. In particular, L is the nominal distance between PEP 0 and AEP 0 . The trajectory of each leg tip during the swing phase is assigned by taking into account the starting and ending times of the stance phase. d 3 d 2 L d 1 d 0 O S4 y S4 x S4 O S5 y S5 x S5 O S6 y S6 x S6 y S2 l 1 l 3 O S2 O S3 x S3 O S1 y S1 x S1 PEP 05 AEP 05 l 0 y S3 x S2 G' x ' G y' G forward motion Fig. 1. Sketch and sizes of the stick insect: d 1 = 18 mm, d 2 = 20 mm, d 3 = 15 mm, l 1 = l 3 = 24 mm, L = 20 mm, d 0 = 5 mm, l 0 = 20 mm Climbing & Walking Robots, Towards New Applications 4 3. Leg mechanism A three-revolute (3R) kinematic chain has been chosen for each leg mechanism in order to mimic the leg structure of the stick insect through the coxa, femur and tibia links, as shown in Fig. 2. A direct kinematic analysis of each leg mechanism is formulated between the moving frame O Ti (x Ti y Ti z Ti ) of the tibia link and the frame O 0i (x 0i y 0i z 0i ), which is considered as fixed frame before to be connected to the robot body, in order to formulate the overall kinematic model of the six-legged walking robot, as sketched in Fig. 3. In particular, the overall transformation matrix 0i Ti M between the moving frame O Ti (x Ti y Ti z Ti ) and the fixed frame O 0i (x 0i y 0i z 0i ) is given by 0 11 12 13 0 0 21 22 23 123 0 31 32 33 (, , ) 000 1 i ix i i iy Ti i i i i iz rrr p rrr p rrr p ϑϑ ϑ ªº «» «» = «» «» «» ¬¼ M . (1) This matrix is obtained as product between four transformation matrices, which relate the moving frame of the tibia link with the three typical reference frames on the revolute joints of the leg mechanism. Thus, each entry r jk of 0i Ti M for j,k = 1, 2, 3 and the Cartesian components of the position vector p i in frame O 0i (x 0i y 0i z 0i ) are given by 11 0 1 21 1 31 1 0 12 3 0 2 0 1 2 3 0 1 2 0 2 22 1 2 3 1 2 3 32 3 0 2 0 1 2 3 0 1 2 0 2 13 3 0 1 2 0 cs; c; ss s(ss ccc)c(ccs sc) scs ssc s(cs scc)c(scs cc) c(ccc s iii ii iiiii i iii iii ii iiiii i iii rrr r r r r αϑ ϑ ϑα ϑαϑ αϑϑ ϑαϑϑ αϑ ϑϑϑ ϑϑ ϑ ϑαϑ αϑϑ ϑαϑϑ αϑ ϑαϑϑ α ==−=− =−− + =− − =++ + =− 2301202 23 1 2 3 1 2 3 33 3012 02 3012 02 0 3012 02 3012 023 01 2 02 s)s(ccs sc) scc sss c(scc cs)s(scs cc) [c (c c c s s ) s (c c s s c )] (c c c s s ) ii ii i iii iii iii iiii i i ixiii iiii i ii i r r pa ϑϑαϑϑαϑ ϑϑϑ ϑϑϑ ϑαϑϑ αϑ ϑαϑϑ αϑ ϑαϑϑ αϑ ϑαϑϑ αϑ αϑϑ αϑ −+ =− =− + + − =−−++ +− ()() 2011 0 3123 123 122 11 0 3012 02 3012 023 01 2 02 2 011 cc scc sss sc s [ c (s c c c s ) s (s c s c c )] (s c c c s ) s c i i iy iii iii ii i i iziii iiii i ii i i aa pa a a p a aa αϑ ϑϑϑ ϑϑϑ ϑϑ ϑ ϑαϑϑ αϑ ϑαϑϑ αϑ αϑϑ αϑ αϑ + =−++ =− + + − + −−− (2) where ϑ 1i , ϑ 2i and ϑ 3i are the variable joint angles of each leg mechanism ( i = 1,…,6 ), α 0 is the angle of the first joint axis with the axis z 0i , and a 1 , a 2 and a 3 are the lengths of the coxa, femur and tibia links, respectively. Mechanics and Simulation of Six-Legged Walking Robots 5 The inverse kinematic analysis of the leg mechanism is formulated through an algebraic approach. Thus, when the Cartesian components of the position vector p i are given in the frame O Fi (x Fi y Fi z Fi ), the variable joint angles ϑ 1i , ϑ 2i and ϑ 3i ( i = 1,…,6) can be expressed as 1 atan2 ( , ) Fi Fi iiyix pp ϑ = (3) and 333 atan2(s , c ) iii ϑϑϑ = , (4) where 2222 2222 11 23 3 23 2 33 ()()() 2()() c 2 s1c Fi Fi Fi Fi Fi ix iy iz ix iy i ii pppaappaa aa ϑ ϑϑ +++− +−− = =± − , (5) x 0i y 0i ≡ y Fi z 0i h i d i L i AEP 0i PEP 0i L/ 2 L/ 2 y Si x Si z Si 2i ϑ 1i ϑ 3i ϑ a 1 a 2 a 3 α 0 robot body p i z Ti x Ti y Ti forward motion z Fi Si p i h T tibia link coxa link femur link swing phase stance phase Fig. 2. A 3R leg mechanism of the six-legged walking robot Climbing & Walking Robots, Towards New Applications 6 and, in turn, by 222 atan2(s , c ) iii ϑϑϑ = , (6) where ( ) () () 22 33 2 33 2 22 23 233 22 33 2 33 s()() c s 2c sc c s Fi Fi Fi iix iy iz i i i Fi iz i i i i apppaa aa aa paa a ϑϑ ϑ ϑ ϑϑ ϑ ϑ +++ =− ++ ++ =− . (7) Therefore, the Eqs. (1-7) let to formulate the overall kinematic model of the six-legged walking robot, as proposed in the following. 4. Kinematic model of the six-legged walking robot Referring to Figs. 2 and 3, the kinematic model of a six-legged walking robot is formulated through a direct kinematic analysis between the moving frame O Ti (x Ti y Ti z Ti ) of the tibia link and the inertia frame O (X Y Z). In general, a six-legged walking robot has 24 d.o.f.s, where 18 d.o.f.s are given by ϑ 1i , ϑ 2i and ϑ 3i (i = 1,…,6) for the six 3R leg mechanisms and 6 d.o.f.s are given by the robot body, which are reduced in this case at only 1 d.o.f. that is given by X G in order to consider the pure translation of the robot body along the X-axis. Thus, the equation of motion X G (t) of the robot body is assigned as input of the proposed algorithm, while ϑ 1i (t), ϑ 2i (t) and ϑ 3i (t) for i = 1,…,6 are expressed through an inverse kinematic analysis of the six 3R leg mechanisms when the equation of motion of each leg tip is given and the trajectory shape of each leg tip during the swing phase is assigned. In particular, the transformation matrix M G of the frame G (x G y G z G ) on the robot body with respect to the inertia frame O (X Y Z ) is expressed as () 100 010 001 000 1 GX GY GG GZ X p p p ªº «» «» = «» «» ¬¼ M , (8) where p GX = X G , p GY = 0 and p GZ = h G . The transformation matrix G B i M of the frame O Bi (x Bi y Bi z Bi ) on the robot body with respect to the frame G (x G y G z G ) is expressed by Mechanics and Simulation of Six-Legged Walking Robots 7 0 0 0 1 0 1 0 0 for = 1, 2, 3 0 0 1 0 0 0 0 1 01 0 1 0 0 for = 4, 5, 6 0 0 1 0 0 0 0 1 i G Bi i d l i d l i  ªº ° «» − ° «» ° «» ° «» °¬ ¼ = ® − ªº ° «» ° − «» ° «» ° «» ° ¬¼ ¯ M (9) where l 1 = l 4 = – l 0 , l 2 = l 5 = 0, l 3 = l 6 = l 0 . Therefore, the direct kinematic function of the walking robot is given by 123 123 ()() (),,, ,, G GBi0i TiGiii G Bi 0i Tiiii XX ϑϑ ϑ ϑϑ ϑ =M M MMM (10) where Bi 0i =MI , being I the identity matrix. The joint angles of the leg mechanisms are obtained through an inverse kinematic analysis. In particular, the position vector () Si i tp of each leg tip in the frame O Si (x Si y Si z Si ), as shown in Fig.2, is expressed in the next section along with a detailed motion analysis of the leg tip. Moreover, the transformation matrix B i Si M is given by 3 3 01 0 1 0 0 for = 1, 2, 3 0 0 1 0 0 0 1 0 1 0 1 0 0 for = 4, 5, 6 0 0 1 0 0 0 1 i i i Bi Si i- i- i L d i h L d i h  − ªº ° «» ° «» ° «» − ° «» °¬ ¼ = ® ªº ° «» ° −− «» ° «» − ° «» ° ¬¼ ¯ M (11) where L 1 = l 1 – l 0 , L 2 = 0 and L 3 = l 3 – l 0 with L i shown in Fig.2. Finally, the position of each leg tip in the frame O Fi (x Fi y Fi z Fi ) is given by 0 0 () () Fi Fi i Bi Si iiBiSii tt=p MMM p (12) where the matrix 0 F i i M can be easily obtained by knowing the angle α 0 . Climbing & Walking Robots, Towards New Applications 8 Therefore, substituting the Cartesian components of () Fi i tp in Eqs. (3), (5) and (7), the joint angles ϑ 1i , ϑ 2i and ϑ 3i (i = 1,…,6) can be obtained. x B3 y B3 z B3 x B2 y B2 z B2 x 01 y 01 z 01 y G x G z G G PEP 1 AEP 2 PEP 2 AEP 3 PEP 3 forward motion x 03 z 03 y 03 x 02 y 02 z 02 z B1 y B1 x B1 y S3 z S3 x S3 y S2 z S2 x S2 y S1 x S1 Y X Z O robot body p G z S1 AEP 1 h G Gƍ Fig. 3. Kinematic scheme of the six-legged walking robot 5. Motion analysis of the leg tip The gait of the robot is obtained by a suitable coordination of each leg tip, which is fundamental to ensure the static stability of the robot during the walking. Thus, a typical motion of each leg tip has to be imposed through the position vector Si p i (t), even if a variable gait of the robot can be obtained according to the imposed speed of the robot body. Referring to Figs. 2 to 4, the position vector Si p i (t) of each leg tip can be expressed as () 1 T Si Si Si Si iixiyiz t ppp ªº = ¬¼ p (13) in the local frame O Si (x Si y Si z Si ) for i = 1,…,6, which is considered as attached and moving with the robot body. Referring to Fig. 4, the x-coordinate Si p ix of vector Si p i (t) is given by the following system of difference equations () () () () () for 1 for 0 ix r i Si ix ix p i tV t tt tV t pt s p pt s − +Δ + Δ=  ° = ® Δ= ° ¯ (14) where V r is the velocity of the tip of each leg mechanism during the retraction motion of the stance phase, even defined power stroke, since producing the motion of the robot body, and V p is the velocity along the robot body of the tip of each leg mechanism during the protraction motion of the swing phase, even defined return stroke, since producing the forward motion of the leg mechanism. [...]... 800 10 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 time [s] (Leg 1) zS2 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 2) zS3 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 3) zS4 10 5 0 0 200 400 600 800 10 00 time... 4 and, then, leg 2 in order to finish with leg 6, as sketched in Fig 12 a, before to restart the wave gait Mechanics and Simulation of Six-Legged Walking Robots 15 zS1 10 5 0 0 200 400 600 800 10 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00... Fig 10 Displacements of the leg tip for VG = 0 .1 mm/s and a = 0.002 mm/s2: a) vertical zdisplacement; b) horizontal x-displacement Mechanics and Simulation of Six-Legged Walking Robots 17 zS1 10 5 0 0 200 400 600 800 10 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00... 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 time [s] (Leg 1) zS2 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 2) zS3 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 3) zS4 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 4) zS5 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 5) zS6 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 6) a) xS1 20 0 -20 0 200 400 600 800 10 00 time [s] (Leg 1) xS2 20 0... 12 00 14 00 16 00 18 00 12 00 14 00 16 00 18 00 time [s] (Leg 1) zS2 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 2) zS3 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 3) zS4 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 4) zS5 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 5) zS6 10 5 0 0 200 400 600 800 10 00 time [s] (Leg 6) a) xS1 20 0 -20 0 200 400 600 800 10 00 time [s] (Leg 1) xS2 20 0 -20 0 200 400 600 800 10 00... Systems, Vol 18 , pp 59-64 Cruse, H., (19 90) What mechanisms coordinate leg movement in walking arthropods ?, Trends in Neurosciences, Vol 13 , pp 15 - 21 Cruse, H & Bartling, Ch., (19 95) Movement of joint angles in the legs of a walking insect, Carausius morosus, J Insect Physiology, Vol 41 (9), pp.7 61- 7 71 22 Climbing & Walking Robots, Towards New Applications Frantsevich, F & Cruse, H., (19 97) The stick... Fig 14 , all leg tips are on the ground in Figs 14 a, 14 c and 14 e Leg tips 4-2-6 perform a swing phase in Fig 14 b and 14 f between the swing phase performed by the leg tips 1- 5-3 in Fig 14 d Mechanics and Simulation of Six-Legged Walking Robots 19 a) b) c) d) e) f) Fig 13 Animation of a wave gait along the X-axis for VG = 0.05 mm/s and a = 0.002 mm/s2: a), c) and e), all leg tips are on the ground; b) leg... = 0.002 mm/s2 and VG = 0.05, 0 .1, 0.5 and 0.9 mm/s Mechanics and Simulation of Six-Legged Walking Robots 11 Fig 6 Computer simulations for the motion analysis of the leg tip of a six-legged walking robot when VG = 0.05 and 0 .1 [mm/s]: a) and g) horizontal x-displacement; b) and h) vertical z-displacement; c) and i) x-component of the velocity; d) and l) z-component of the velocity; e) and m) planar... independent tasks, namely 1) Attitude Control and 2) Steering Control The underlying concept for the presented Source: Climbing & Walking Robots, Towards New Applications, Book edited by Houxiang Zhang, ISBN 978-3-902 613 -16 -5, pp.546, October 2007, Itech Education and Publishing, Vienna, Austria Climbing & Walking Robots, Towards New Applications 24 control methods are rather general and could be applied... 800 10 00 time [s] (Leg 3) xS4 20 0 -20 0 200 400 600 800 10 00 time [s] (Leg 4) xS5 20 0 -20 0 200 400 600 800 10 00 time [s] (Leg 5) xS6 20 0 -20 0 200 400 600 800 10 00 time [s] (Leg 6) b) Fig 9 Displacements of the leg tip for VG = 0.05 mm/s and a = 0.002 mm/s2: a) vertical zdisplacement; b) horizontal x-displacement Climbing & Walking Robots, Towards New Applications 16 zS1 10 5 0 0 200 400 600 800 10 00 . 400 600 800 10 00 12 00 14 00 16 00 18 00 0 5 10 time [s] (Leg 1) z S1 0 200 400 600 800 10 00 12 00 14 00 16 00 18 00 0 5 10 time [s] (Leg 2) z S2 0 200 400 600 800 10 00 12 00 14 00 16 00 18 00 0 5 10 time [s]. 1) z S1 0 200 400 600 800 10 00 12 00 14 00 16 00 18 00 0 5 10 time [s] (Leg 2) z S2 0 200 400 600 800 10 00 12 00 14 00 16 00 18 00 0 5 10 time [s] (Leg 3) z S3 0 200 400 600 800 10 00 12 00 14 00 16 00 18 00 0 5 10 time. 400 600 800 10 00 12 00 14 00 16 00 18 00 0 5 10 time [s] (Leg 4) z S4 0 200 400 600 800 10 00 12 00 14 00 16 00 18 00 0 5 10 time [s] (Leg 5) z S5 0 200 400 600 800 10 00 12 00 14 00 16 00 18 00 0 5 10 time [s]