References 579 74 Wigotsky, V., Compounding, PE, Jan. 2002. 75 North American Plastics Recyclers and Brokers 2002 Survey, PN, May 20 & 26, 2002. 76 Recycling at K 2001, PT, Feb. 2002. 77 Schut, J. H., Big German Plant May Relieve U.S. Bottleneck in Recycling Carpet nylon, PT, May 2002. 78 Schut, J. H., Entrepreneur Puts Mixed Polymer Recycling On Track to Success, PT, May 2003 79 Esposito, F., Resin Makers to Announce New Products, PN, May 2003. 80 Plastic Fuel Tank Meets PZEV Regulation (vehicle emission rate), PE, May 2003. 81 Engineering Materials Handbook, Vol. 2: Engineering Plastics, ASM International, 1988. 82 High Temperature Polyolefin Fibers and Yarns, PE, May 2003. 83 Colvin R., Heavy-Duty, Self-Sealing Bag Challenges Paper Sacks, MP, Mar. 2003. 84 TPVs Can Withstand Higher Temperatures, PN, Apr. 28, 2003. 85 Get a Grip (Santoprene), PE, Feb. 2003/ 86 TPVs Do Windows (and Doors), PE, Feb. 2003. 87 TPEs Goes Where Others Cannut, PE, Dec. 2002. 88 Automotive, Soft-Touch Markets Promise Strong Year (TPEs), MP, Feb. 2003. 89 Non-Blooming, Non-Fogging UV Stabilizer for TPOs, PT, May 2003. 90 Toensmeier, P. A., Stretch Film Provides Shrink film Performance, MP, Mar.2003. 91 Thedinger, B., Trash Bags & Liners Grow at Rate of GDP, PT, Mar. 2003. 92 ExxonMobil Adds mLLDPE with Higher Densities, PT, Feb. 2003. 93 Dow Discovers New Class of Post-Metallocene' Polyolefin Catalyst, PT, May 2003. 94 Materials Data, PE, Apr. 2002. 95 Combining Metallocene Technology with Gas Phase EPDM, PE, Feb. 2003. 96 Heller, M. A., Guide to Medical Device Regulation, Thompson Publ. Group, Inc., 2003. 97 BOPP Film Demand in North America, PN, May 5, 2003. 98 Defosse, M., Public's Education is Key to Vinyl's Acceptance, MP, Jun. 2002. 99 Environmental Briefs, The Vinyl Institute, May 2000. 100 Toensmeier, P. A., Vinyl Forum has Value for the Public, MP, Dec. 2002. 101 Toloken, S., PVC Blend Improves Blood-Clotting Options, PN, Mar. 3, 2003. 580 Plastic Product Material and Process Selection Handbook 102 Gaukroger, T., Adding Process Flexibility to Rigid PVC, PE Europe, May 2003. 103 Annual Vinyl Window Market Growth, PN, Feb. 3, 2003. 104 Annual Vinyl Siding Market Growth, PN, Apr. 28, 2003. 105 DcFosse, M., Mature Industry Still Has Room for Growth (PVC), MP, Feb. 2003. 106 There's lots New in Acetal, PT, May 2003. 107 Rosenzweig, M., Tough Auto Requirements Drive Fluoroelastomcrs Growth, MP Jan. 2003. 108 Auto Industry Drives European Fluoropolymers, PE Europe, May 2003. 109 Fluoropolymer is a Better Barrier for Fuel Hoses, PT, Mar 2003. 110 Modified PTFE Improves Properties and Processing, PT, May 2003. 111 Right Inside the GearBox: Polyamidc 6.6 Stands the Heat in BMW 7 Series, Polymotive, Feb. 2, 2003. 112 PBT Designed for Use with Water-Assist Molding, PM&A, May 2003. 113 Dow Unit to Market Cyclics PBT Materials, PN, Apr. 28, 2003. 114 Structural Products has 8 New Offerings (GE/PC), PN, May 12, 2003. 115 Renstrom, R., Downloading to Hard Drives could Shrink Market for (PC) Discs, PN, Mar. 10, 2003. 116 Taking the Heat (polyester transparent, thermoformable sheet), PE Europe, May 2003. 117 PEEK Preview, PE Europe, May 2003. 118 PET Boost for Bottled Beer, PE Europe, May 2003. 119 Shrink-Sleeve Polymer (for PET bottles), PE, May 2003. 120 Wide Mouth PET Bottles Get OTE Closures (outside tamper evident), PT, May 2003. 121 Polysulfone on a Power Trip, PE, Jan. 2003. 122 Klempner, D., et al.,. Advances in Urethane Science and Technology, Rapra Technology Ltd., 2002. 123 Cutting Down on Freeze-Ups (TPUs), PE, Feb. 2003. 124 TPUs Get a Grip On Overmolding, PT, May 2003. 125 Wheelchair Cushions Rest on TPU Attributes, PE, May 2003. 126 Knights, M., LSR (Liquid Silicone Rubber) Finds an Old Trick can Overcome New Challenges, PT, Feb. 2003. 127 North American Recycling Market, PN, May 26, 2003. 128 Shut, J. H., Recycling Conference Shows Off New Ways to Enhance Recycled Plastics, PT, May 2003. 129 Toloken, S., Chicago Getting M1-Bottles Recycling Site, PN, Jun. 2, 2003. 130 Sefosse, M., Wood Composites are Expanding Among Sectors (with recycled plastics), MP, Jan. 2003. References 581 131 Railway Ties Gain Ground, MP, Feb. 2003. 132 New Materials and Processing- Design Success, Design News, Apr. 23, 2000. 133 Markets May Warm Up to Thermochromic Effects, MP, Mar. 2003. 134 Mapleston, P., End-Users Fire Up Demand for High Heat Thermoplastics, MP, Jun. 2002. 135 Naitove, M., Editorial, PT, Jan. 2003. 136 Market Data Book, PN, Dec. 30, 2003. 137 SPI Issues Third-Quarter Equipment Sales Statistics, PE, Jan. 2003. 138 Capacity Utilization for Plastic Product Manufacturing, PN, Feb.17, 2003. 139 Japan's Exports and Imports of Plastics/Rubber Processing Equipment, PN, Feb. 24, 2003. 140 Firenze, A. R., The Plastics Industry, Adaptive Instruments Corp., Hudson, MA 01749, 2000. 141 Rosato, D. V., The Impact of New Machinery in '76, SPI New England Fall Conference, Portsmouth, NH, Oct. 5-7, 1966. 142 Mapleston, P., Specialized Techniques, MP, Jun.2002. 143 Rosato, D. V., Extruding Plastics: Practical Processing Handbook, Kluwer, 1998. 144 Colby, P. N., Plasticating Components Technology: Screw & Barrel Technology, Spirex Bulletin, Spirex Corp., 2000. 145 Bernhardt, A., et al., Rationalization of Molding Machine Intelligent Setting & Control, SPE-IMD Newsletter, No. 54, Summer 2000. 146 Finan, J. M., Thermally Conductive Thermoplastics, PE, May 2000. 147 Coleman, B. D., Thermodynamics of Materials with Memory Treatise, Arch. Rat. Mech. Anal., 1964. 148 Moore, S., Preventive Purging has Practical Benefits, MP, Sep. 2002. 149 Van Haste, F., Chemical Purging: When and How to Do It Right, PT, Feb. 2003. 150 Leventon, W., Part Making on a Very Small Scale: Micromolding for Medical Devices, MD&DI, May 2002. 151 Harris, H. E., Controls and Instrumentation, MP Encyclopedia, 1986-1987. 152 Sheble, N., Temperature Measurement a Matter of Electronics, ISA Sensor Technology, Jan. 2002. 153 PID Controller Saves Space, Yet Maintains High Performance, Plastics Auxiliaries & Machinery, Jan/Feb. 2002. 154 Fierens, B., et al., ISO/QS Process Certification: Measuring the Proper variables, SPE ANTEC, 1999. 155 Temperature Settings, IM, Feb. 2002. 156 Wiczer, J., New Efforts to Streamline Smart Sensor Standards, ECN, ep. 2003. 582 Plastic Product Material and Process Selection Handbook 157 Rucinski, P., Manufacturing Solutions for the Automation, Control, and Monitoring of the Injection Molding Process, SPE IMD Newsletter, Issue 59, Spring 2002. 158 Moldflow Corp., 91 Hartwell Ave., Lexington, MA 02421, tel. 781-674-0085, Fax +1-781-674-0267, http://www.moldflow.com, http ://www. cmold, com. 159 DCS, PLC, and PC Technologies Converge in New Breed of Hybrid Controllers, InTech, Jan. 2003. 160 Brazier, G., Safe Wireless Sensing, InTech, May 2003. 161 Extrusion monitoring Goes Wireless, PT, May 2003. 162 Herb, S., Weapon for Mass Production; Distributed Microprocessing Without the Traditional Complexity, Cost, and limits, InTech, Aug. 2003. 163 Rauwendaal, C., Look Out for Metal-to-Metal Wear, PT, May 2003. 164 Rosato, D. V., Blow Molding Handbook, 2 ed Edition, Hanser, 2003. 165 Jovalusky, J., Integrating Circuit-Protection Functions Reduces Power Source Costs, ECN, Jun. 2003. 166 Watkins, F., et al., Control Technologies for Safety and Productivity, InTech ISA, Feb. 2002. 167 Colvin, R., Automated Roll Handling Boosts Cast Film Operations; Cost Plays a Secondary Role to Improved Productivity, Quality, and Safety, MP Nov. 2000. 168 Rosato, D. V., Nick's Notes: Safety Issue, Molding Views, Injection Molding Division Newsletter of SPE, No. 60, May 2002. 169 Pockham, G., Safety Sign Formats, Compliance Engineering, May/June 2002. 170 The Importance of Safety Agency Listing, Compliance Engineering, May/June 2002. 171 Rosato, D. V., What Molders Must Do about ANSI Safety Specifications, PW, Apr. 1978. 172 Rosato, D. V., Plastics Industry Safety Handbook, Cahners, 1973. 173 Rosato, D. V., Injection Molding Chapter: R. F. Jones book Guide to Short Fiber RP, Hanser, 1998. 174 Rosato, D. V., Injection Molding Higher Performance Reinforced Plastic Composites, J. of Vinyl & Additive Technology, Sep. 1996. 175 Bozzelli, J. W., Going from Hydraulic to Electric: Processor's Perspective, IMM, 2002 Annual. 176 Snyder, M. R., Milacron Launches Internet-Based Link for Injection Molding Machine Diagnostics, MP, Jul. 2000. 177 Robot 2004 Worldwide Directory, Robotics World/Motion Control, July/Aug. 2003. 178 Shad Foresees Consolidations Continuing, PN, May 5, 2003. References 583 179 Electric Machines and New Processes Catch Fire, PT, Jan. 2003. 180 Schut, J. H., Interchangeable Dam Adds Versatility to Screw, PT, Jan. 2003. 181 SPC System Meets Custom Applications, IM, Jul. 2002. 182 Larscn, A. N., ct al., Is thc Shear Heating Phenomenon Truly Responsible for Viscosity Reduction in Thermoplastic Injection Molding? SPE ANTEC, 1998. 183 Dcaly, B., Size Does Matter for Injection Units, MP, Jul. 2002. 184 Maplcston, P., Cavity Pressure Control System, MP, Jun. 2002. 185 Dcmirci, H. H., Process Window Identification for a very Tight-Tolerance Injection Molded Part with Multiple Performance Criteria, SPE ANTEC, 2001. 186 Schott, N., ct al., Optimization in Process Control for uniform Quality of the Optical Components, SPE ANTEC, 2001. 187 Coxc, M., ct al., The Establishment of a Processing Window for Thin-Wall Injection Molding of Syndiotactic Polystyrene, SPE ANTEC, 2000. 188 Knights, M., Gas Assist Works for Thcrmosets and Smaller Parts, Too, PT, May 2003. 189 Juntgcn, T., ct al., The Water Injection Molding Technique (WIT) as an Attractive Alternative and Supplement to Gas-Assisted Injection Molding (GAIM), SPE ANTEC, 2002. 190 Water Injection Technology Used in Injection Molding, Polymotive, Feb. 2003. 191 Hollow to the Core, PE Europe, May 2003. 192 Juntgcn, T., ct al., The Water-Injection Technique (WIT) as an Attractive Alternative and Supplement to Gas-Assisted Injection Molding (CAIM), SPE-IMD Molding News, No. 61, Winter 2003. 193 Tustison, L., Overmolding Overview, IM, Jul. 2002. 194 Cha, S., ctal., 3-D Simulation of Thin-Wall Injection molded Parts by CAE, SPE IMD News, May 2002. 195 Extrusion List: Buyers' Guide, SPE, Aug. 2003. 196 White, J., et al., Screw Extrusion, Hanscr, 2003. 197 Moore, S., Reactive Extrusion Aids Bottle-to-Bottle Recycling, MP, Mar. 2003. 198 Schut, J. H., Torquc and Speed: How Much is Enough? PT, Scp. 2002. 199 Toensmeier, P. A., Package Design Advances Enhancc Brand Awareness, MP, Feb. 2003. 200 Waller, P., Melt Fracture or Intcrfacial Instability? Different Ills Needs Different Cures, PT, Mar. 2003. 201 Gillard, L., Custom Cable Embraces a World of Conductors, ECN, June 2003. 584 Plastic Product Material and Process Selection Handbook 202 First Nylon/Acrylate TPVs are Now Commercial, PT, May 2003. 203 Castillo, R., Coextrusion Die Design Doubles Number of Layers for Packaging Films and Blow Molding Parisons, SPE ANTEC, 2001. 204 Thielen, M., Blow Molding, Sequential Coextrusion: Advanced Technology Opens Door into a New World of Tailored Parts, Modem Plastics Encyclopaedia, 1999. 205 Schut, J. H., Stretching Film's Limit (5-to-7-to-9), PT, Feb. 2003. 206 Coextruding Multilayer Blown Film, Dow Chemical Co., 1970s. 207 Toensmeier, P. A., Flex Tech Stakes Its Future on success of Coex MDO, MP, Feb. 2003. 208 Emboss Film Without Heat, PT, Feb. 2003. 209 Changing Market in Compounding Machinery, PE Europe, May 2003. 210 Schut, J, H., Long-Fiber Thermoplastics Extend their reach, PT, Apr. 2003. 211 Rosato, D. V., Concise Encyclopedia of Plastics, Kluwer, 2000. 212 Rosato, D. V., Current and Future Trends in the Use of Plastics for Blow Molding, SME, 1990. 213 Defosse, M., Large Blow Molded Containers Take Off, MP, Apr. 2000. 214 Blow Molding Higher Output Vies with Flexibility, PT, May 2003. 215 Thedinger, B., Blow Molded Drums, IBCs, and THPs Stuck in Low Gear, PT, Jan. 2003. 216 O-I Launches See-Through PET Beverage Can, PT, Jan. 2003. 217 European Union Gives Tetra Laval the Green Light to Acquire Sidel, MP, Feb. 2003. 218 Pryweller, J., Blow Molders Showcase Stock, PN, May 5, 2003. 219 Plastics Pipe Institute, 100-Year Design Life Cited for Corrugated HDPE Pipe, PT, June 2003. 220 Leaversuch, R., Blow Molding Equipment, PT, June 2003. 221 Keener, C. et al., Optimizing Extrusion Blow Molding for Multilayer Container Production, Graham Machinery Group, York, PA, Aug. 15, 2001. 222 Leaversuch, R., All-Electric & Stretch Blow Get Top Billing, PT, Jan. 2002. 223 Leaversuch, R., Super-Clear PP Barrier Bottles arc Now (Injection) Blow Molded, PT, Feb. 2003. 224 Naitove, M. H., Injection Blow Molding COC (cyclic olefin copolymer) Arrives: Here's How to Do It, PT, Mar. 2003. 225 Defoose, M., Soft-Drink Giants Stae Interest in Multilayer Packaging Alternatives, MP, Feb. 2003. 226 Toensmeier, P. A., Kortec Readies 144 Cavity Coex PET Preform Mold, MP, June 2003. Re%renees 585 227 Moore, S., Two-Stage Stretch (Injection) Blow Process Claims Benefits for Drink Cups, MP, Jan. 2003. 228 Lee, N. C., Control Flash in Extrusion Blow Molding, PT, Sep. 2002. 229 Freeman, R., Pressure Forming with Style, SPE Thermoforming Quarterly, Spring 1999. 230 Throne, J. L., Technology ofThermoforming, Hanser, 1996. 231 Defoose, M., Fuel Tank Makers Appear to Ease Off Thermoforming, MP, Sep. 2002. 232 McConnell, W. K., Ten Fundamentals ofThermoforming, SPE, 2002. 233 Gerber Products Invests in Plastic (Thermoformed Baby) Jars, PN, May 26, 2003. 234 North American Thermoformers (Packaging & Industrial End Markets), PN, Feb. 10, 2003. 23S When Far East Meets South/Thermoformers Used by Chinese Appliance Maker, PN, June 2, 2003. 236 Thermoforming Buyers' Guide, PE, Feb. 2003. 237 Top Ten North American Thermoformers, PN, Feb. 10, 2003. 238 Toensmeier, P. A., Automotive is Fertile Ground for Growth, MP, Nov. 2002. 239 Thermoforming Nylon, PE, May 2003. 240 All PP Composites Could Challenge GMT (Glass-Mat-Thermoplastic) in Markets, MP, June 2003. 241 PLA (polyactic acid) Makes U.S. Debut in Thermoforming (Food) Packaging, PT, May 2003. 242 Mcinzinger, D., Thermal Expansion of Plastics, SPE Thermoforming Div. Newsletter, Vol. 20, No.l, 2001. 243 Hard Fact: Packaging (Blister) Can Save Kid's Lives, PN, Feb. 24, 2003. 244 Form/Fill/Seal Machine Targets Bottle Blow Molding, MP, June 2003. 245 Melt=Phase Billet Rorming Adds New Option for Containers, PT, Jan. 2003. 246 Murray, C. J., Foam Exhibits Negative Poisson's Ratio, DN, Dec. 1989. 247 Microcellular Foam Technology, IMM, Dec. 2001. 248 Osswald, T. A. & G. Mcnges, Material Science of Polymers for Engineers, 2nd Edition, Hanser, 2003. 249 Meeting the dead Line: Urethane Foams Move from HCFCs to 'Cleaner' Blowing Agents, PT, Jan. 2003. 250 Hoechtlcn, A. and Drostc, W., (to I.G. Farbcnindustrie A.G.) DRP 913, 474, Apr. 20, 1941 (Japanese Patent Publication No. Sho-31-7541). 251 Flame Rctardant Agrees with Montreal Protocol, PE, Jan. 2003. 252 Sherman, L. M., Polyurethane: Get Ready for HCFC Phase-Out, PT, Dec. 2001. 586 Plastic Product Material and Process Selection Handbook 253 Sentinel Products Introduces Expanded PP Sheet, PN, June 2, 2003. 254 Foam Polystyrene with Nanoclay and CO2, PT, May 2003. 255 PUR Flushing Solvents Leave Less Residue, PT, May 2003. 256 Recycling PUR Foam is Gleaned from Mattresses, MP, Feb. 2003. 257 Trexel Licenses Users ofDemag Ergocell System, PT, Dec. 2001. 258 Elden, R. A., et al., Calendering of Plastics, London Iliffee Books, 1971. 259 Compunding and Mixing, PT, June 2003. 260 Haberstroh, E., et al., In-Mold Film Method Targets PUR Exteriors (Autos), MP, Sep. 2002. 261 Automotive Paint-Finding the Right Formula, Polymotive, Feb. 2003. 262 Polymer Glass Coating Creates Germ-Free Surfaces, MD&DI, Jan. 2002. 263 Snyder, C. D., Materials for Reaction Injection Molding Processing, Composite Fabrication Assoc., Oct. 3-6, 2001. 264 Palmosina, M. F., Gating for the Reaction Injection Molding Process, Bayer Corp., Pittsburgh, PA, 2002. 265 Rosato, D. V., Plastics Processing Data Handbook, Kluwer, 2nd Ed., Kluwer, 1997. 266 Integral Skin Foam Protects Fancy Tires, PT, Sep. 2002. 267 Poly-DCPD RIM Shifts into High Gear, PT, Sep. 2002. 268 Frederick, C. D., et al., Rotational Molding, Plastics Solutions International 2000. 269 Rotational Molding Transforms Movie Characters into Merchandise, Job Shop Tech., Aug. 2002. 270 Rotational Molders-Listing, Ranking, and Survey, PN, Aug.11, 2003. 271 Bregar, B., Research Shows Promise for Rotomolded PP, PN, Aug. 5, 2002. 272 Rotomolders get New Alternatives to XLPE, PT, Sep. 2002. 273 Chroma Corp., McHenry, IL, Attention Rotomolders: Clean Air Mixers Faster, PT, Sep. 2002. 274 Knights, M., New Technologies Add Zip to Rotomolding, PT, Jan. 2003. 275 Henkel Loctite, Rotomolding Release Suits Multiple Releases, MP, Oct. 2002. 276 Dorgham, M. & Rosato, D. V., Designing with Plastic Composites, Interscience Enterprises-Geneva, 1986. 277 Fussell, E., Sheding Light on Industrial Fiber Optics: A Strand of Hope for Fiber's Future, InTech, June 2003. 278 Daido Steel, Tool Steel Selection Software Targets Mold Making Startups, Modern Mold, 2000. 279 Davis, B. A., et al., Compression Molding, Hanser, 2003. 280 Krottner, V., Teach Yourself Polishing, Moldmaking Technology, Aug. 2000 & Reclaiming the Lost Art of Benching, Moldmaking Technology, Oct. 2000. References 587 281 Mold Making, National Tool & Machining Assoc. General Literature, 2000. 282 Plute, M., The Basics of Tool Management, Moldmaking Technology, Jan. 2002. 283 Mennig, G., Mold-Making Handbook for the Plastics Engineer, 2nd Edition, Hanser, 1998. 284 Stoeckhert, K., Mold Making Handbook, 2nd Edition, Hanser, 1998. 285 The 2004 Corvette to Sport Carbon Fiber Hood, PN, June 2, 2003. 286 Smart Move: Forfour Targets U.S. Market (includes Plastics), PN, Jan.27, 2003. 287 Engineering a Composite Hyperyacht, RP, Dec. 2002. 288 Arctic (RP) Radomes, RP. Dec. 2002. 289 McConnell, V. P., Composites and the Fuel Cell Revolution, RP, Jan. 2002. 290 High-Performance Short-Fiber PP Rivals Long-Fiber Grades, Mr', June 2003. 291 Purified Cellulose Fibers Show Promise in Reinforced Thermoplastics. 292 Marsh, G., Filling the Front-Line Training Gap, RP, Apr. 2002. 293 Marsh, G., MACT: A More Restrictive World for Boatbuilders, RP, Jan. 2002. 294 Rosato, D. V., Industrial Plastics in Materials Handling, International Mgm. Soc., Oct. 1985. 295 Jacob, A., Spray-up Offers Process Improvements, RP, Jan. 2002. 296 Soft Touch with Injection Compression Moulding, Polymotive, Feb. 2003. 297 Knights, M., Metal-Powder Injection Molding Moves Into Large Parts, PT, Feb. 2003. 298 Gaines, D., Metal Injection Molding, Job Shop Tech., Feb. 2003 and Aug. 2003. 299 Seeley, R. S., New Directions for Metal Molding, Job Shop Tech., Feb. 2003. 300 Cost Effective Infusion of Sandwich Composites for Marine Applications, RP, Dec. 2003. 301 Self-Reinforcing Thermoplastic is Harder, Stronger, Stiffer Without Added Fibers, PT, June 2003. 302 Engineering Resins (PPO) Extend their Reach, PT, June 2003. 303 Compounder Creates Flexible Process with Conveyor Line, Plastics Machinery & Auxiliaries, May 2003. 304 Combine Melts & Liquids of Different Viscosities, PT, Jan. 2003. 305 Compounding & Mixing Equipment, PT, June 2003. 306 Esposito, F., Compounders will Unveil an Assortment of Products (NPE), PN, May 12, 2003. 588 Plastic Product Material and Process Selection Handbook 307 Flexible PVC, PE, Jun. 2002. 308 Coaker, A. W., Twentieth Century Ethics of Risks and Hazards in Business, SPE Vinyl Div. Newsletter, Jun. 1995. 309 Handbook for the Metalworking Industries, Gardner Publ., 2002. 310 Tobin, B., What is a Mold Worth? PM&A, Apr. 2003. 311 Mirman, I., A Model is Worth a Thousand Drawings, MoldMaking Tech., June 2003. 312 Molds and Tools, PT, June 2003. 313 Creehan, K. D., Developing Generalized Reverse Engineering Methodologies for Moldmaking, MoldMaking Tech., June 2003. 314 Top 20 Mold Makers, PN, Mar. 17, 2003. 315 Baranek, S. L., The International Special Tooling and Machining Association: A World Power, MoldMaking Tech., June 2003. 316 Bales, S. J., How to Locate the Right Polishing and Plating Vendor, MoldMaking Technology, Sep. 2002. 317 Kaszynski, J., Ensuring Mold Steel Polishability, MoldMaking Technology, Mar. 2003. 318 Ultrasonic Mould Cleaning, Polymotive, Feb. 2003. 319 Bales, S. J., Mold Preservation and Maintenance for Ultimate Productivity, MoldMaking Technology, Dec. 2001. 320 Rich, M. J., et al., Surface Cleaning of Mold Release Compounds, SPE ANTEC, 2002. 321 Dry-Ice Cleans Tools Fast, PT, Feb. 2002. 322 Knights, M., Unscrewing Molds Go Electric, PT, Sep. 2002. 323 Buyers' Guide to Molds, Dies, and Mold components, PE, Jan. 2003. 324 Monitoring Software Targets Family Molds, PT, May 2003. 325 Gorlich, R., et al., Designing 48 Individual Cavities in One Mold Plate, MoldMaking Tech., Feb. 2003. 326 Mold Design to Automation, IM, Feb. 2002. 327 Kaszynski, J., Choosing Thermally Conductive Tooling Materials, MoldMaking Tech., Aug. 2002. 328 Piscope, S., Milling Advances Increase Productivity, MoldMaking Tech., Jun. 2002. 329 Roy, S., et al., Options for Restoring Molds, MoldMaking Tech., Sep. 2002. 330 D-M-E Releases Survey on Mold and Die Industry, PE, Aug. 2002. 331 Dealey, B., What Could the Mold of Tomorrow be Like? MP, Feb. 2003. 332 Mold Designers Put the Web to Work, PT, Mar. 2003. 333 Software Checks Profile Die Designs, PT, May 2003. 334 CAD, CAM, & CAE Listing, PT, June 2003. [...]... controller computer designs 185 control choice 184 malfunctions 185 programmable microprocessor controller operating systems 184 technology 184 -6 water leaks 185 processing, and thermal interface 13-15 Processing Handbook and Buyers' Guide 139 processing window 176-7 product development 573-4 product handling 554-60 Production Xpert 181 profile fabricating processes 254-7 cooling 255-6 free extrusion... A., Plastics and Composites Welding Handbook, Hanser, 2003 359 Welding, Bonding, & Assembly Equipment, PT, June 2003 360 Rohifs, T., Plastics Machining: Understanding the Basics, MD&DI, Apr 2002 361 Bogin, M., Working with Plastics Made Easier with Basic Machining Techniques, Job Shop Tech., May 2001 590 Plastic Product Material and Process Selection Handbook 362 Koenig, K M., Fixturing & Routing Plastics... Quick and Below Budget, Industrial Computing, May 2003 592 Plastic Product Material and Process Selection Handbook 413 Moore, S., Global Demand Heats Up in High-Volume Markets, MP, Feb 2003 414 Toensmeier, P A., Market Dynamics Redraw the Graph of Resin Supply, MP, Feb 2003 415 Recognize the Need, Generate the Lead, I-R World, Jan-Feb., 2003 416 European Plastics Directory: Materials, Semi-Finished Products,... 397 pipe production 252-4 dies 253-4 dimensions/sizes control 253 downstream line equipment 253 planetary gear extruders (PGEs) 377 plastic behavior 17, 37 plastic classification systems 120 plastic deformation 154 plastic foam s e e foamed plastics; foaming plastic industry, overview 1-3 plastic memory 25-6, 151 610 Index plasticators 156, 163 single and two-stage 196 plasticizer 375,500 plastics... Functional and Aesthetic: Acetal, PE, July 2003 463 Making Smarter Plastics, MD&DI, July 2003 464 Metal Molding Shapes Up As Appealing Market, MP, Aug 2003 465 Boeing Opts for Composites for 7E7, RE, July/Aug 2003 466 Carbon Fibre SMC Halves Weight of Automotivc Parts, RP, July/Aug 2003 467 Prepreg Qualification Scheme, RP, July/Aug 2003 594 Plastic Product Material and Process Selection Handbook 468... 516 -18 materials of construction 512-13, 515 metals 513, 515 overview 512-15 properties of materials 514 protective coating/plating 519-20 prototyping 547-8 surface requirements 518 tool life 513 see also die; mold mold/die geometry 191 molded products, handling and finishing 557 Moldflow EZ-Track 178 ,182 -3 Moldflow Plastics )(pert (MPX) 178, 180 Moldflow Shotscope 178 molding closed 150 foamed plastics... 3 advantages and limitations 36-7 behavior 8-11 chemical composition 9 classification 3-8 combined with other materials 44 future 575 future uses 570-2 major families 5 morphology 9 performance 6, 44-5 primary processing 9 processes 122-3 processing 6 properties 8-11, 40-129 overview 16, 40-4 selection 1, 119-24 terminology 9 Plastics & Computer Inc 187 plastics industry, application 3 Plastics Learning... performance of finished product 492 plastic content 455 pressure and product size limitation 494 process selection 491-6 processes 457, 459 product design shapes vs processing methods 493 properties 458-9,461,465-8 of fiber reinforcements 460 vs amount of reinforcement 455 reinforcements 470-1 resins used 456 self-healing 574 specific requirements 494 strength 462 tank fabrication 485 thermoplastics 456, 473... clamshell machines 435 combined plastics 433 comparison with other processes 429 cycle times 429 design 438 four-step 430 high-flow plastics 433 machine construction 435-6 machines 431 microprocessor control 436 mold 436-8 overview 428-30 performance 434-5 plastic behavior 434 plastic powder form 433 plastics 431-4 plastisols 502 pressure 431 process 430-1 product examples 432 rock -and- roll (slush) equipment... advantages 408 appliance application 408 cast materials for molds 412 chemical system 416 -18 classifications of products 408 comparison with other processes 420 continuous automatic operation 411 conversion process 422-4 costs 413-15 cure times 417 disadvantages 415 elastomers 417 end product requirements 418 equipment 409-10, 416 high-temperature processing of nylon 417 -18 in-mold pressures 410 integral sldn . Dec. 2001. 586 Plastic Product Material and Process Selection Handbook 253 Sentinel Products Introduces Expanded PP Sheet, PN, June 2, 2003. 254 Foam Polystyrene with Nanoclay and CO2, PT, May. Streamline Smart Sensor Standards, ECN, ep. 2003. 582 Plastic Product Material and Process Selection Handbook 157 Rucinski, P., Manufacturing Solutions for the Automation, Control, and Monitoring of. of Products (NPE), PN, May 12, 2003. 588 Plastic Product Material and Process Selection Handbook 307 Flexible PVC, PE, Jun. 2002. 308 Coaker, A. W., Twentieth Century Ethics of Risks and