Thông tin tài liệu
Figure 9-20: Selecting the extra color from elsewhere in the design After the color selection, I want to move the tagline to be closer to the logo. I do this by applying a nega- tive value to the margin property. Also, I want the tagline to be flush to the left of the logo, so I apply a left padding value of 15 pixels. Finally, I want to spread out the letters in the tagline by setting the value of letter-spacing to 0.3em, as shown in Figure 9-21. With the logo all set up, it’s time to move to the Web page columns. Figure 9-21: The logo with the newly stylized tagline Starting the Two-Column Layout The elements of the header span the entire 800 pixels I allotted for the design. While that’s good for branding purposes, it’s not an efficient use of the space in terms of displaying information. Imagine if everything you read from newspapers to magazines had their articles and photos stacked on top of each other from top to bottom. 343 Bringing It All Together 11_588338 ch09.qxd 6/22/05 11:29 AM Page 343 It would take a lot longer to scroll down the Web page, and it would probably look a lot like what the Web looked like in 1993. (I sure don’t want to re-create that for my Web site.) Thus, I need columns — actually, two columns. Columns in HTML First, let’s look at the HTML for that’s what will be used to define the areas of the two columns in the Web page: <body> <div id=”frame”> <fieldset id=”searchbox”> [ content goes here ] </fieldset> <div id=”header”> [ content goes here ] </div> <div id=”sidecol”> [ content goes here ] </div> <div id=”maincol”> [ content goes here ] </div> </body> In this version, I decided to have the content for the side column (on the right-hand side) come first in the HTML, while the main content (on the left-hand side) comes later. Side Column What I want to do to get the side column is to bring the content out of the normal flow of the document. I do this by using the position property and setting the value to absolute. Absolute positioning allows me to take a certain element and put it at a precise point in the Web page. I’m talking pixel-perfect positioning, which after the discussion on Web typography, seems as if it is an impossibility. However, it’s the truth. So, reviewing my design in Adobe Photoshop (as shown in Figure 9-22), I measure where I want the top- left corner of the side column to start and come up with the values 545 pixels from the left and 185 pixels from the top. Also, I double-check my column widths and make a note from the Info palette that the width of the side column in my design is 255 pixels. 344 Chapter 9 11_588338 ch09.qxd 6/22/05 11:29 AM Page 344 Figure 9-22: Using Photoshop to determine the placement for the side column I will use these three new pieces of information to write the offset properties in the following CSS rule to help position the side column: #sidecol { position: absolute; top: 185px; left: 545px; width: 255px; margin: 0; padding: 0 0 1.6em 0; background: transparent url(“/_assets/img/sidecol_bkgd.gif”) no-repeat top right; } I also place in properties for the margin (set to zero), the padding, and a background image as a flourish for the site design. But, looking at the column in my browser, I notice a problem. When using absolute positioning, the column stays in place, no matter if the browser window is resized large or small, and, what’s worse, it could obscure the other content in the Web page, as shown in Figure 9-23. Unfortunately, this is the nature of the absolute positioning. It’s impossible to set an element to be posi- tioned and have it move with the content as the user resizes the window (that is, if we just use absolute positioning by itself). To solve this problem, I use another magic trick. This time, I set the positioning to relative of the parent element of the side column container. 345 Bringing It All Together 11_588338 ch09.qxd 6/22/05 11:29 AM Page 345 Figure 9-23: The side column not playing well with the other content Elements that are positioned with relative positioning aren’t taken out of the flow of a document render- ing as they are for absolutely positioned elements. Those elements are placed as they would normally appear in a Web browser. However, the offset properties such as left and top apply only to the element’s location in that document flow. So, an element that’s relatively positioned with an offset property of top set to a value -2em appears to be moved up, as shown in Figure 9-24. Figure 9-24: A couple of words levitating thanks to relative positioning 346 Chapter 9 11_588338 ch09.qxd 6/22/05 11:29 AM Page 346 When combined with relative positioning on a parent element (such as the div frame container), abso- lute positioned elements can be placed precisely and still expand with the rest of the content as a user expands the browser. Why the frame container? Because that’s the element that is setting the overall width of the design of the Web page. Recalling what I did earlier, I looked up the offset property values for top and left by the upper-left corner of the Photoshop document. The frame container acts as the representation of that document by, well, framing all the Web page design elements into the 800-pixel width. Take note that you can use this setup on other elements in a Web page design in addition to side columns. This is truly a great technique that has so many applications. So, experiment and share with others what you find out. So, let’s apply the position property to the frame container: #frame { width: 800px; margin: 0 auto; position: relative; } Now, the side column should be placed exactly where I want it within the frame container. However, I still have the overlap issue, with the content in the left and right columns, as shown in Figure 9-25. Not to fear, though, for it’s time to work on the main, left-hand column. Figure 9-25: The side column positioned perfectly 347 Bringing It All Together 11_588338 ch09.qxd 6/22/05 11:29 AM Page 347 Main Column The positioning of the side column has left some work to be done. I need to remove the obfuscation of the content that’s created by both columns. The solution is a very easy addition of applying padding to the right side of the main column so that there is enough room for the side column. In this design, the side column is 255 pixels. So, I give the padding on the right side that much, plus 40 extra pixels, to make it a total of 295 pixels, as shown in Figure 9-26. The 40 pixels create a gutter (a space between the two columns so that they don’t touch or run into each other). #maincol { margin: 0; padding: 0 295px 1.6em 0; color: #030; background: transparent url(“/_assets/img/journal_bkgd.gif”) no-repeat 0 0; } Figure 9-26: Two columns of text The other CSS properties for the main column container include the addition of design flourishes such as the color of the text, as well as a background image that starts at the top of the main column. 348 Chapter 9 11_588338 ch09.qxd 6/22/05 11:29 AM Page 348 The color property is very important because any new HTML text that is written within this container gets set to this color by default. So, that frees my hands of setting the color for each element within the main column container to the same value. In the future, I need to worry about changing the color of an element only if it needs to be something other than the default value. Now, my next step is to work on the content that goes into the main content column. Main Column Content With the two columns set up, it’s time to take a look at the content within the two columns. First up is the content in the main column. My Site Says, “Hi,” Does Yours? One of the most important things I tell my students and clients is to have an introductory paragraph on the main page of your site. It’s important to let new visitors (and maybe some of the regulars) know what to expect when they come to a Web site. When Web developers build their own sites, we sometimes get so caught up in the designing and devel- oping that something as simple as a few quick lines describing what we are trying to accomplish seems foolish. Not everyone can determine the purpose of a site by the domain name or title, For example, my new media design and publishing company name is Heatvision.com. What does it do? Sell comic books or sunglasses? Well, it does neither. So, to stop the confusion, I have a few lines that say what the company does: Heatvision.com consults on user interface design issues, builds brands, offers training in Web production and design techniques, and assists in Section 508 compliance. Whether the goal is to sell, promote, teach, enlighten, or entertain, we sidestep hype and fash- ion to focus on what really works in making a client’s message compelling and useful to their audience. It’s simple and to the point. People thinking I sell comics or sunglasses are as quick as The Flash told otherwise, and they can search elsewhere for the issue where he races Superman. For my personal site, I want to put in the following markup for the introductory text, as shown in Figure 9-27: <div id=”desc”> <h2>What is this site?</h2> <p>This is the web site for me, Christopher Schmitt. I’m an author, graduate student, web designer, product developer, and an idea generator. After two years, I’m currently wrapping up my graduate studies at Florida State University in Interactive and New Communication Technologies.</p> </div><! END #desc > 349 Bringing It All Together 11_588338 ch09.qxd 6/22/05 11:29 AM Page 349 Figure 9-27: The default styling of the introductory text I wrap the introductory paragraph in a div with an id attribute set to the value of “desc”. This will be the containing block for the description. Within the div element are the question wrapping in an h2 ele- ments and a paragraph containing the answer. Now that we have the markup set up in place, I start again to style the content from the outside in, start- ing with the div element, as shown in Figure 9-28. Figure 9-28: The styling of the description container #desc { margin: 12px 0 0 0; padding: 0 0 0 111px; background: transparent url(“/_assets/img/pageDesc/dots_4x3.gif”) no-repeat 16px 0; color: #2D6734; line-height: 1.5; width: 350px; } 350 Chapter 9 11_588338 ch09.qxd 6/22/05 11:29 AM Page 350 The first declaration for the margin sets 12 pixels at the top of the introductory text. This move is made to create some white space. The next rule is important when it comes to the introductory text. Since I want to have the graphic image of dots positioned in the upper-left corner, I need to position the text out of the way so that the dots don’t interfere with the background image. So, in the same manner I moved the main column content by adjusting the padding on the right side, I adjust the padding on the left-hand side of the introductory text to make room for the background image. The next three declarations set the background image, color of the text, and the line-height for the text. The last property sets the width of the introductory text. I have set the width in my design for the main column to 505 pixels. Even with the left-side padding of 111 pixels, that still leaves 394 pixels. Why shrink the width of the paragraph by 44 pixels? The answer is that I want to create that white space again because I want the visitor’s eye to see the logo and not be hindered by a block of text. Although there is 40-pixel gutter between the two columns, enlarging the gutter at the very top of the main page acts as a sort of visual funnel. It diverts the eye from the header into the main content of the main page. However, by setting the width on the sides of the desc container, I’ve run afoul of Microsoft’s box model for Internet Explorer 5.5 for Windows. So, do get around this, I use the hack as described in Chapter 8: #desc { margin: 12px 0 0 0; padding: 0 0 0 111px; background: transparent url(“/_assets/img/pageDesc/dots_4x3.gif”) no-repeat 16px 0; color: #2D6734; line-height: 1.5; width: 461px; voice-family: “\”}\””; voice-family: inherit; width: 350px; } The first width value is a false value slipped like a poison to WinIE 5.5 so that it correctly sizes the desc container. The other browsers are able to read the second width property value through the voice-family hack. By “all the other browsers” I mean all except Opera, which requires an extra CSS rule by itself. But this isn’t a problem. Extra CSS rules don’t cost much: html>#desc { width: 350px; } 351 Bringing It All Together 11_588338 ch09.qxd 6/22/05 11:29 AM Page 351 Then, the next two properties apply the styles for the heading and paragraph text to make it look more in tune with the way I designed, as shown in Figure 9-29: #desc h2 { font-size: 1em; font-weight: bold; margin: 0; padding: 0; } #desc p { font-size: 0.9em; margin: 0 0 15px 0; padding: 0; } Figure 9-29: The stylized introductory text Styling the Blog Posts Much like the heading and paragraph in the introductory text, the styling of the text in the blog posts is a fairly straightforward exercise. Today, most blog posts are auto-generated by applications such as WordPress (see www.wordpress.org) or Movable Type (see www.movabletype.org). If you are following along at home with a different blogging software package, your mileage will vary in how closely my markup matches up with yours because of the differences in each application. However, the markup from these tools should be somewhat similar, although you might need to make some adjust- ments if you want to re-create my design. First, I take a look at the markup for a sample blog post, as shown in Figure 9-30: <div class=”post”> <h2>Recent Journal Entry</h2> <h1 class=”storytitle”><a href=”/log/index.php?p=1” rel=”bookmark” title=”Permanent Link: Something So Embarrasing”>Something So Embarrasing</a></h1> <div class=”storycontent”> <p>My garbage can was stolen last night.</p> <p>[ content goes here ]</p> 352 Chapter 9 11_588338 ch09.qxd 6/22/05 11:29 AM Page 352 [...]... over to the original Web page design and graft the CSS rules for the navigation to the main CSS file So, with a new HTML page, I set up an unordered list structure to mirror the site map I worked out earlier in the chapter, as shown in Figure 9- 35 Figure 9- 35: The default rendering of the main navigation The look for menus needs to be similar to (yet stand out from) the rest of the design to facilitate... Chapter 9 For the postfooter container, I’m going to apply the following CSS rule: #postfooter { margin: -.5em 0 1em 0; text-transform: lowercase; letter-spacing: 1em; color: #cccc 99; font-size: 1em; } The rule applies some minor design changes It moves the footer up by -.5em and places a padding of 1em at the bottom of the footer Then, to differentiate the content in the footer from the blog post, the CSS. .. Together With the foundation set, I can now move forward and start working in the design for the navigation The design I’ve built for the navigation makes use of three-dimensional–looking graphics The idea of the navigation is to make the menu links look like buttons However, with typical buttons in Web design, the text of the label is “trapped” in the image Designers write the name of the button in Photoshop... with my design for the buttons, I create two sets with two images each (as shown in Figure 9- 40): ❑ Off State Two images that indicate an “off” state ❑ On State Two images that indicate an “on” state 363 Chapter 9 Figure 9- 40: The button sets With the images ready, it’s time to focus on bringing the menu navigation into the browser I start by revising the CSS rule for the links (as shown in Figure 9- 41):... use CSS to bring the Publications menu back so that the user can see it (as shown in Figure 9- 46) by using the display property with a value of block .pub-page ul#mainnav li#pub-link ul { display: block; margin: 0; padding: 0 0 7px 0; } Figure 9- 46: Only the Publications menu appears 3 69 Chapter 9 This menu reveal is done by using the specificity in the CSS The CSS selector is instructed to “look” for. .. shown in Figure 9- 53): #blogroll ul { list -style- type: none; margin: 0 17px 0 0; padding: 0; height: 100px; overflow: auto; } 375 Chapter 9 Figure 9- 53: The shortened blogroll list As you can tell from Figure 9- 54, the space allotted on my Web page for the links is smaller, but there is an addition of a two scroll bars to the right and bottom of the list The property overflow is the reason for both scroll... the Web document, I want to use a variation of Douglas Bowman’s excellent Sliding Doors technique (see www.alistapart.com/articles/slidingdoors/) Essentially, I want to separate the button graphic into two parts: a top and bottom part, as shown in Figure 9- 38 Figure 9- 38: Splitting the button into two parts Then, I’m going to extend the length of one of the images (as shown in Figure 9- 39) Figure 9- 39: ... width for any browser’s vertical scroll bar Also, when I removed the horizontal scroll bar, I added a margin of 13 pixels to the right side (Listing 9- 4) and background color to the list items to create the L-shaped pattern, as shown in Figure 9- 54 Listing 9- 4: CSS for the Blogroll List Items #blogroll li { background-color: #ffffcc; margin: 0 0 0 13px; padding: 0 25px 0 0; } I took out the bullets for. .. list -style- image property, but I also need to replace the previous list -style- type declaration with a new one (as a backup, in case my image fails to load), as shown in Figure 9- 55: #blogroll ul { /* list -style- type: none; */ list -style- type: disc; list -style- image: url(“ /img/bullet_green_dark.gif”); margin: 0 17px 0 0; padding: 0; height: 100px; overflow: auto; } The main problem with this CSS rule... few things: ❑ Stand out from the rest of the Web page design ❑ Be easy to find within a page design ❑ Let the user know where he or she is in the structure of a Web site Because I’m going to focus a lot of attention in the design and execution of the navigation, I want to create a separate HTML page so that I won’t interfere with the other elements on the Web page When I’m done working on the navigation, . Together 11_588338 ch 09. qxd 6/22/05 11: 29 AM Page 343 It would take a lot longer to scroll down the Web page, and it would probably look a lot like what the Web looked like in 199 3. (I sure don’t. the width of the side column in my design is 255 pixels. 344 Chapter 9 11_588338 ch 09. qxd 6/22/05 11: 29 AM Page 344 Figure 9- 22: Using Photoshop to determine the placement for the side column I will. elements on the Web page. When I’m done working on the navigation, I will move the HTML over to the original Web page design and graft the CSS rules for the navigation to the main CSS file. So,
Ngày đăng: 08/08/2014, 20:22
Xem thêm: Wrox Professional CSS Cascading Style Sheets for Web Design phần 9 pot, Wrox Professional CSS Cascading Style Sheets for Web Design phần 9 pot
