New trends and developments in automotive industry Part 1 docx

30 261 0
New trends and developments in automotive industry Part 1 docx

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

NEW TRENDS AND DEVELOPMENTS IN AUTOMOTIVE INDUSTRY Edited by Marcello Chiaberge New Trends and Developments in Automotive Industry Edited by Marcello Chiaberge Published by InTech Janeza Trdine 9, 51000 Rijeka, Croatia Copyright © 2011 InTech All chapters are Open Access articles distributed under the Creative Commons Non Commercial Share Alike Attribution 3.0 license, which permits to copy, distribute, transmit, and adapt the work in any medium, so long as the original work is properly cited. After this work has been published by InTech, authors have the right to republish it, in whole or part, in any publication of which they are the author, and to make other personal use of the work. Any republication, referencing or personal use of the work must explicitly identify the original source. Statements and opinions expressed in the chapters are these of the individual contributors and not necessarily those of the editors or publisher. No responsibility is accepted for the accuracy of information contained in the published articles. The publisher assumes no responsibility for any damage or injury to persons or property arising out of the use of any materials, instructions, methods or ideas contained in the book. Publishing Process Manager Iva Lipovic Technical Editor Teodora Smiljanic Cover Designer Martina Sirotic Image Copyright Blaz Kure, 2010. Used under license from Shutterstock.com First published January, 2011 Printed in India A free online edition of this book is available at www.intechopen.com Additional hard copies can be obtained from orders@intechweb.org New Trends and Developments in Automotive Industry, Edited by Marcello Chiaberge p. cm. ISBN 978-953-307-999-8 free online editions of InTech Books and Journals can be found at www.intechopen.com [...]... =Europe and Age =18 -24} -> Three Region=Europe and Gender =Female and Cd =Cute -> Three Region=Asia and Gender=Female and Age =18 -24 -> Four Default -> Three Table 5 Rules generated for the design parameter dp32 Confidence 10 0.0% 10 0.0% 10 0.0% 10 0.0% 10 0.0% 10 0.0% 10 0.0% 10 0.0% 10 0.0% 10 0.0% 10 0.0% 10 0.0% 91. 66% 83.33% 83.33% 80.0% 80.0% 80.0% 0.0% 8 New Trends and Developments in Automotive Industry and. .. steering-wheel) that were above the support No rule 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Rule Region=Europe and Gender =Female and Cd =Classic -> Three Region=Europe and Gender=Female and Cd=Sporty -> Three Region=Asia and Gender=Female and Cd=Classic -> Four Region =Europe and Age =18 -24 and Cd =Cute -> Three Region =Asia and Gender = Male and Cd =Cool -> Three Region=Asia and Age =18 -24... Part 1 Industrial Production Technology 1 Data Mining and Intelligent Agents for Supporting Mass Customization in the Automotive Industry 1Informatics Efthimia Mavridou1,3, Dimitrios Tzovaras1, Evangelos Bekiaris2, Pavlos Spanidis2, Maria Gemou2 and George Hassapis3 and Telematics Institute, Centre for Research and Technology Hellas, 6th km Charilaou – Thermi Rd., P.O Box: 603 61, P.C.: 570 01, Thermi,... M (19 97) Hybrid Kansei engineering system and design support International Journal of Industrial Ergonomics, Vol 19 , No 2, pp 81 92, 016 9 814 1 Quinlan, J (19 87) Simplifying decision trees International Journal of Man–Machine Studies, Vol 27, pp 2 21 248 Sun, Y.; Wong, A & Wang, Y (2006) An overview of associative classifier, Proceedings of the 2006 International conference on Data mining, pp 13 8 -14 3,... project provided the data for our study Those included interview surveys of 14 0 truck drivers and 2 61 car drivers from Europe and Asia (China, Finland, France, Germany, Greece, India, Italy, 6 New Trends and Developments in Automotive Industry Malaysia, Netherlands, Singapore, Sweden, Switzerland, the UK) We present a case study on the car customer surveys data Each individual car customer was asked to select... Conference on Data Mining (ICDM’ 01) , pp 369–376, San Jose, November 20 01, IEEE Computer Society Press,San Jose California Liu, B.; Hsu, W & Ma, Y (19 98) Integrating Classification and Association Rule Mining, Proceedings of the 4rd International Conference Knowledge Discovery and Data Mining (KDD-98), pp 80-96, New York, Aug 19 98, AAAI Press, New York USA Nagamashi, M (19 89) Kansei Engineering, Kaibundo... • Creating the WSDL corresponding to each agent service registered with the DF and publishes the service in a UDDI registry if needed 10 New Trends and Developments in Automotive Industry Fig 2 WSIG Architecture (Jade 2008) Two main processes are continuously active in the WSIG web application: i The process responsible for intercepting DF registrations/de-registrations and converting them into suitable... administrating and monitoring the activity of running agents Each running instance of the JADE runtime environment is called a ‘Container’ as it can contain several agents A set of active containers is called a ‘Platform’ A single special Main Container should always be active in a platform and all other containers register with it when they start The Main Container differs from normal containers in. .. values for an individual customer The example refers to a female car driver from Europe, who belongs to the age range of 25-54 and would like to have a “Cool” car Data Mining and Intelligent Agents for Supporting Mass Customization in the Automotive Industry Design parameter dp 11 Predicted Values Aluminium Design parameter dp 31 Predicted Values dp12 Multiple dp32 Four dp 21 Aluminium dp 41 Angular dp22... consisting of highlevel representatives of participants in the market provides strategic advice and information to DNW 2 The wind tunnels of DNW The eleven wind tunnels of DNW include low speed, high speed, transonic and supersonic facilities They are distinguished with three-lettered names The following wind tunnels are also used for testing ground and rail vehicles: 18 KKK LLF LST NWB New Trends and Developments . NEW TRENDS AND DEVELOPMENTS IN AUTOMOTIVE INDUSTRY Edited by Marcello Chiaberge New Trends and Developments in Automotive Industry Edited by Marcello Chiaberge Published by InTech Janeza. Politecnico di Torino Italy Part 1 Industrial Production Technology 1 Data Mining and Intelligent Agents for Supporting Mass Customization in the Automotive Industry Efthimia Mavridou 1, 3 , Dimitrios. and confidence thresholds. Design parameter 11 dp 12 dp 21 dp 22 dp 31 dp 32 dp 41 dp Numbers of rules generated 14 1 97 14 4 84 12 3 44 11 0 Number of rules above thresholds s =10 % and

Ngày đăng: 21/06/2014, 05:20

Từ khóa liên quan

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan