Đang tải... (xem toàn văn)
GEM users guide Adobe Photoshop GEM users guide Adobe Photoshop
PN 105920-001 RevA Contents WELCOME TO DIGITAL GEM INSTALLATION System Requirements Installation from CD Installation from the Internet Purchasing Digital GEM Registering Digital GEM Starting Digital GEM DIGITAL GEM PLUG-IN OPERATIONS Digital GEM Plug-In Window TROUBLESHOOTING TECHNICAL SUPPORT 11 SOFTWARE LICENSE AGREEMENT 12 © 2002 Applied Science Fiction, Inc All rights reserved Applied Science Fiction, ASF, and Digital GEM are all pending or registered trademarks of Applied Science Fiction, Inc All other marks are the property of their respective owners ii PN 105920-001 Rev A WELCOME TO DIGITAL GEM The Digital GEM plug- in is software that automatically reduces noise in digital image files so that the overall image is more visually pleasing The Digital GEM plug- in works with digital image files from any source, including film scanners, flatbed scanners, digital cameras, CDs and the Internet It is compatible with Adobe® Photoshop® and other Photoshop plug- in compatible programs and supports both Windows® and Macintosh® platforms It is available as an Internet download and on a CD INSTALLATION System Requirements The Digital GEM plug- in is compatible with Adobe Photoshop (may also work with other Photoshop plug- in compatible applications) and runs on both Windows and Macintosh Recommendations for Windows Version ã ã ã ã Pentiumđ II or better with 128 MB of RAM (for typical sized images; very large images will require more memory) Windows 98 SE, NT 4.0 (Service Pack 6a), 2000, ME, XP Home, XP Professional Adobe Photoshop 5.0, 5.5, 6.0, or 7.0; Adobe Photoshop Elements 1.0 or 2.0; Adobe Photoshop LE 5.0; Adobe PhotoDeluxe® Home Edition 4.0; Jasc® Paint Shop Pro® Minimum display resolution: 800 x 600 pixels (Note: Use only the Small Fonts display font size at 800 x 600 resolution.) Recommendations for Macintosh Version ã ã ã ã PowerMACđ G3 or better with 128 MB of RAM (for typical sized images; very large images will require more memory) Macintosh OS 8.6, OS 9.x, OS X Adobe Photoshop 5.0, 5.5, 6.0, or 7.0; Adobe Photoshop LE 5.0; Adobe Photoshop Elements 1.0 or 2.0; Adobe PhotoDeluxe 2.0 Minimum display resolution: 800 x 600 pixels Installation from CD Before installing the Digital GEM plug- in, close all other applications Windows Load your Applied Science Fiction plug- ins CD into your CD-ROM drive The installer will load automatically and will guide you through the installation process PN 105920-001 Rev A If the installer does not load automatically, click on Start and then select Run Enter D:\WIN\setup.exe into the Run dialog box (where D: is the drive letter of your CD ROM) Click on “OK” to start the installation Macintosh • • • • Load your Applied Science Fiction plug- ins CD into your CD-ROM drive The ASF CD icon will appear on your Macintosh desktop Double click on the ASF CD icon Double click on the MAC icon Double click on the icon for the Digital GEM plug- in installer The installer will guide you through the installation process NOTE: The default lo cation for the ASF Plug- in Software is in the Applications folder If you choose the default location for the plug- in, you will need to drag the plug- in from your Applications folder into the Plug- ins folder of your host application, such as Photoshop Installation from the Internet Everyone starts with the Trial software If you like the ASF Plug- in Software and want full functionality (i.e., no watermark on future images), pay for the software and ASF will email you a registration code that allows you to convert the Trial software into the full plug- in product Before installing the Digital GEM plug- in, close all other applications Installing the Digital GEM Plug-in • • • Go to the Applied Science Fiction Downloads Web page www.asf.com/download/register.shtml Enter the information into the required fields and click on “Submit.” The Downloads screen appears Choose the platform on which you want to run the Digital GEM plug- in, as explained below PN 105920-001 Rev A Windows Platform If you want to use the Digital GEM plug- in on Windows, complete the following steps: • Click on the ASF plug- in “Windows” entry that matches your operating system (98 SE/ME, NT4 SP6a/2000, XP) The Security window opens • Click on “Yes” to accept the security verification The installer then starts the installation • When “Welcome to the InstallShield Wizard …” appears, click on “Next.” The license agreement appears next • Review the license agreement and click on the “I accept …” entry to accept the terms of the license agreement Clicking on “I not accept …” exits the installation program The Custom Setup screen then appears • Verify that the plug- ins will be installed in the folder for the host application that you want to use If necessary, select an alternative location where you want to install the ASF plug- in software • Click on “Next.” • Click on “Finished” after the installation is complete You may need to restart your PC Macintosh Platform If you want to use the Digital GEM plug- in on a Macintosh, complete these steps: • Double click on either the Digital GEM “Macintosh (hqx)” or “Macintosh (bin)” entry The bin file downloads faster but is less compatible with older systems The hqx file takes longer to download but is more compatible with older systems Double click on the hqx file to uncompress the installer and then double click on the installer The installer will then create a file named “ASF Digital GEM x.x Installer” on your Desktop (where x.x represents the current version number) • Double click on “ASF Digital GEM x.x Installer.” An orange Digital GEM plug- in screen appears • Click on “Continue.” The license agreement opens next • Review the license agreement and click on the “I accept …” entry to accept the terms of the license agreement Clicking on “I not accept …” exits the installation program • Select a folder where you want to install the Digital GEM plug- in, and click on “Choose.” You may want to install it in the plug- ins folders for any host applications on which you want to run it Or you may want to install it in a downloads folder • Once the installation is successful, click on “Continue” to install the plug- in in other locations, or “Quit” to exit installation PN 105920-001 Rev A Purchasing Digital GEM Click on the Buy and Register button in your Digital GEM plug- in window and then click on the Purchase Online button Alternatively, you can launch your Web browser and go to the ASF Web site store at www.asf.com/store, which will bring up the ASF storefront page with instructions After buying the Digital GEM plug- in, you will receive a purchase confirmation email that contains the information you will need to register your ASF Plug- in Software Registering Digital GEM Make sure you have handy your purchase confirmation email which contains your registration information Start your host application, and open an image file Select Digital GEM from the Applied Science Fiction option under the Filter/Effects pull down menu The Digital GEM plugin window will open Click on the “Buy and Register” button A Registration window will open Be sure to enter your Registered name, Registered email address, and Registration code exactly as they appear in your purchase confirmation email Click on “OK” and a Thank You window opens Click on the Thank You window “OK” and both the Registration and Thank You windows will close You have completed your registration Starting Digital GEM After loading your copy of the Digital GEM plug- in, you will need to start your host application, open an image, and start Digital GEM Two examples with different host applications are listed below For more information on using plug- ins, please refer to the documentation that came with your host application Adobe Photoshop and Adobe Photoshop Elements • • Select the File menu • Select the Open entry • Select the image file you want to change • Click on Open • Click on the Filter menu • Select Applied Science Fiction • Start your host application (Photoshop or Photoshop Elements) Select Digital GEM PN 105920-001 Rev A Adobe PhotoDeluxe • Start PhotoDeluxe • Select the File menu • Select Open File • Select the image file you want to change • Click on Open • On Windows, click on the Advanced Menus button on the lower left side of the screen • Or, on a Macintosh, click on the Advanced button on the upper left side of the screen • On the main toolbar at the top of the menu, click on the Effects button • Select Applied Science Fiction • Select Digital GEM PN 105920-001 Rev A DIGITAL GEM PLUG-IN OPERATIONS The Digital GEM plug- in window offers a few simple controls for operating its features These are easily accessible in the Digital GEM window, as shown below in Figure NOTE: The Trial version places a watermark in processed images Watermarks in saved images can never be removed To convert the Trial version into the non-watermarking version, buy a Registration Code and register your plug- in Digital GEM Plug-In Window Figure Digital GEM Window Check for Update Button The Check for Update Button will launch your default browser and open the ASF Update site so you can check whether you have the latest version of the plug- in software If you not have the latest version, this site can facilitate acquiring the latest version if you should choose to so PN 105920-001 Rev A Buy and Register Button In the trial version of the Digital GEM plug- in, each processed image is watermarked with “Applied Science Fiction™.” To prevent the watermark from appearing on future images, you need to purchase and register the Digital GEM plug- in Until you register your plug- in, a “Buy and Register” button will appear in the top left corner of the Digital GEM window If your computer is currently connected to the Internet, clicking on “Buy Online” launches a default browser window that will bring up the ASF store (www.asf.com/store) The plug- in window will remain open Follow the on- line instructions to complete your purchase If your computer is not currently connected to the Internet, the browser will display a "Page not found" error message Connect to the Internet and then click on “Buy and Register.” After purchasing, you will be emailed registration information that you will use to register your plug- in To register, click on the "Register" button to open the Registration window Complete the entry areas using the Registered name, Registered email address, and Registratio n code exactly as they appear in the email The easiest way to enter your registration information is to copy and paste it from the email, making sure there are no blank spaces before or after the code Once you complete registration, the "Register" button will disappear Preview Window The Preview window shows you the portion of your image you have selected in the Navigation window You use the Before and After buttons to determine whether the Preview window displays the image as it appears before or after applying Digital GEM If you change the settings of the Controls, the preview window will reprocess the image accordingly Before/After Buttons The Before and After buttons determine what will be displayed in the Preview window Selecting the Before button shows how a specified area of your image looks before Digital GEM processes it, so that you have a constant to compare your changes against It presents the area of your image enclosed in the red box in the Navigation window Selecting the After button shows the same area after Digital GEM processes it Navigation Window The red box in the Navigation window outlines the area that appears in the Preview window for your review This allows you to focus on a specific area within the image to see the overall effect of Digital GEM You can shrink or enlarge the box with the Zoom buttons To review a different area, click on that area and the red box will outline it Or click and hold on the box and drag it to the new area Zoom Buttons The Zoom buttons let you change the size of the area displayed in the Preview window The red box in the Navigation window outlines the area that appears in the Preview window for your review To zoom in on a smaller area, click on the “+” button To zoom out, click on the “–” PN 105920-001 Rev A button The zoom buttons not restrict where Digital GEM will be applied in the image Digital GEM is applied to the entire image Controls The Controls regulate amount of noise reduction and clarity applied to the processed image To change from the default setting, adjust the effect controls by clicking on a slider bar with your mouse pointer, holding the left mouse button down, and sliding the bar left or right If you are using Windows, you can move the sliders in one- increment steps using the left and right arrow keys on your keyboard once you have selected it by clicking on it or using the tab key You can also use the home and end keys to move the slider to the minimum and maximum values The Highlight Noise Reduction slider controls noise reduction in the lighter areas of the image Moving the slider to the right increases the degree of noise reduction The Highlight Noise Reduction slider goes from (unmodified original image) to 100 (maximum image adjustment), with 50 being the default setting Experiment to find the right balance your image The exact level of Highlight Noise Reduction is displayed in the Highlight Noise Reduction Edit Box to the right of the slider The Shadow Noise Reduction slider controls noise reduc tion in the darker areas of the image Moving the slider to the right increases the degree of noise reduction The Shadow Noise Reduction slider goes from (unmodified original image) to 100 (maximum image adjustment), with 50 being the default setting Experiment to find the right balance your image The exact level of Shadow Noise Reduction is displayed in the Shadow Noise Reduction Edit Box to the right of the slider Moving the Clarity slider bar to the right will sharpen the image details in conjunction with the effects of the noise reduction settings Moving the Clarity slider bar to the left will soften the image details in conjunction with the effects of the noise reduction settings In all, you have a very simple set of controls that let you regulate the noise reduction and clarity you want to achieve with Digital GEM Any settings you change are automatically shown in the Preview when the After button is selected OK Button Click on “OK” to apply the current Digital GEM processing results to your image Remember that to save your image, you will need to use the Save command in your host application Default Button The Default Button sets the ASF plug- in slider controls back to the default values PN 105920-001 Rev A Cancel Button To exit Digital GEM without processing your image and end your Digital GEM session, click on “Cancel.” Help Button Clicking on “Help” brings up an index of useful topics about how to use the Digital GEM plugin Click on the topic you need If you cannot find the information you need, click on the “Technical Support” entry in the help index for how to obtain further information The Help window also has an About entry that you can click on to see the version and date of your copy of the Digital GEM plug- in About Plug-In Window Some image editing applications provide an About Plug-In feature under the application’s Help menu The About Plug-In window for Digital GEM shows the version and date of your plug- in software It also has Buy Online and Register buttons, for quick access to those processes TROUBLESHOOTING The plug-in is not working, I get an error message The problem could be your monitor display resolution Check that your display resolution is set for at least 800 x 600 and for small fonts The ASF Plug- in Software may not function properly when using 800 x 600 resolution and large fonts I get the error message "Could not complete the Digital GEM command because there is not enough memory (RAM)." Try to increase the RAM or swap space available to your host application You can modify these settings in Photoshop, for example, under Edit-Preferences-Plug-ins & Scratch Disks, and EditPreferences-Memory & Image Cache You can also try reducing the size of your image by reducing its dimensions or resolution prior to running the Digital GEM plug- in The Digital GEM plug-in appears on the menu, but it is grayed out and I am unable to select it The Digital GEM plug- in will be enabled when you open an image that it can process If you open an image and the plug- in is still grayed out, make sure that the image is bits per pixel and in RGB mode Your host application should have a way to change the image from other modes to RGB and from other bits to bits PN 105920-001 Rev A How I register GEM after I have bought it? After you purchased the GEM plug- in, you received a purchase confirmation email You will need the information in that email to complete your registration You also should have installed the GEM plug- in for use with your image editing application • • • • • • • • • • • • Open your host image editing application (e.g., Photoshop) Open an image file If you are using PhotoDeluxe, make sure Advanced Menus is active Click on Filter/Effects Click on Applied Science Fiction and select the GEM plug- in The ASF Digital GEM window will open Click on the Buy and Register button in the upper left of the window The Enter Registration Information window will open Enter the registration information from your purchase confirmation email into the appropriate areas Make sure you copy them exactly and not introduce any extra characters or spaces Click OK after you have entered all the correct information A Thank you for registering window will open Click OK in the Thank you window The Thank you window and the Enter Registration Information window will close Your Digital GEM plug- in registration is complete I entered the registration information in the Registration window, but I get an error message about invalid registration information Make sure that all fields are filled in All fields are necessary to complete the registration Also, the fields are case sensitive; make sure that you are typing the characters exactly as you have been told them Make sure that you not leave a blank space after any letter, which might happen if you are cutting and pasting in information Another problem could be that you are using registration information for the wrong product Confirm that you are using the right registration information for the product I installed the Digital GEM plug-in, but nothing is happening You need to start your host application, open an image, select Applied Science Fiction from the Filter/Effects menu, and then select Digital GEM Note that if you have just installed your host application for the first time, you must launch it once and then reboot your computer prior to installing Digital GEM I installed the Digital GEM plug-in but not see it listed under the filters for my host application You need to select Applied Science Fiction from the Filter/Effects menu, and then select Digital GEM If Applied Science Fiction does not appear on your Filter/Effects menu, you may have 10 PN 105920-001 Rev A installed Digital GEM in the wrong folder for use with your host application Consult the documentation that came with your host application to determine where the plug- in should be located The installer did not list my imaging application when installing The Digital GEM plug- in only officially supports the following applications: • • • • • Adobe Photoshop 5.0, 5.5, 6.0, or 7.0 (may also work with other Photoshop plug- in compatible applications) Adobe Photoshop Elements 1.0 or 2.0 Adobe Photoshop LE 5.0 Adobe PhotoDeluxe Home Edition 4.0 (Windows only) Jasc Paint Shop Pro 7.0 (Windows only) For all other Adobe Photoshop compatible plug- in applications, you must tell the installer the folder in which to place the Digital GEM plug- in files After I run Digital GEM, my image has "Applied Science Fiction" text written over it You are running a trial version of the Digital GEM plug- in If you have already purchased the full version, you need to click on the "Register" button in the Digital GEM window and enter your information to complete registration I once had the fully registered version of the Digital GEM plug-in, but somehow now I have reverted back to the trial version with watermarks Your registration code file may be lost or corrupted Press the “Register” button and re-enter your registration information TECHNICAL SUPPORT ASF on- line technical support service is staffed Monday - Friday, 8:00am - 5:00pm CST (GMT 06:00), except U.S holidays Our support web site also provides FAQs on each of our plug- ins If you not find the solution to your problem there, please submit a Help Request to our support group All ASF Plug- in Help Requests will be answered in a timely manner Summary of Technical Contact Information Help Request www.asf.com/support/plugins/HelpReq.shtml Website www.asf.com FAQs www.asf.com/support/plugins/pluginsupport.shtml PN 105920-001 Rev A 11 SOFTWARE LICENSE AGREEMENT IMPORTANT – READ CAREFULLY THIS ASF END-USER LICENSE AGREEMENT (THE “AGREEMENT”) DETAILS THE TERMS AND CONDITIONS OF YOUR USE OF THE SOFTWARE PRODUCT PRIOR TO DOWNLOADING, INSTALLING OR USING THE SOFTWARE PRODUCT, YOU SHOULD CAREFULLY REVIEW THIS AGREEMENT REDISTRIBUTION OR RENTAL OF THE SOFTWARE PRODUCT IS NOT PERMITTED BY CLICKING THE ACCEPTANCE BUTTON OR INSTALLING OR USING THE SOFTWARE PRODUCT, THE INDIVIDUAL OR ENTITY LICENSING THE SOFTWARE PRODUCT ("CUSTOM ER") IS VOLUNTARILY AND EXPRESSLY CONSENTING TO ENTER INTO THIS LEGAL AGREEMENT WITH ASF FOR LICENSING OF THE SOFTWARE PRODUCT THE CUSTOMER MAY NOT PURCHASE, INSTALL, OR USE THE SOFTWARE PRODUCT UNLESS LICENSEE ACCEPTS ALL THE TERMS OF THIS AGREEMENT D EFINITIONS “Acceptance” means that the Customer has accepted the terms of this Agreement “ASF” means Applied Science Fiction, Inc., a Delaware corporation having a place of business at 8920 Business Park Drive, Austin, Texas 78759 USA “Customer” means you, the individual or entity purchasing, downloading, installing, or using the Software Product “Registration Code” means a software password unique to the Customer that enables the complete operation of the Software Product “Software Product” means the respective object code associated with ASF’s proprietary software for image correction and enhancement as downloaded, installed or used by the Customer Software Product expressly includes the fully operational software having the Registration Code, as well as any trial versions or other software having limited operability DOWNLOAD 2.1 Customer Information Customer agrees to provide accurate Customer information during the downloading/registration process 2.2 Payment Customer agrees to pay ASF or its designee the purchase price for the Registration Code Customer understands and agrees that the purchase price is a license fee and that ASF maintains ownership of the Software Product and Customer does not obtain any ownership rights in the Software Product 2.3 Failed Installation ASF recognizes that Customer may fail to properly install the Software Product After payment of the purchase price for the Registration Code, ASF shall reasonably allow the Customer to repeat the installation process until such time that the Software Product is successfully installed and enabled In the event that the Software Product cannot be successfully installed or enabled, ASF shall have the right to provide the Customer with an electronic copy of the Software Product via other means or to refund the purchase price to the Customer 12 PN 105920-001 Rev A LICENSE AND USE 3.1 Intellectual Property Rights All right, title and interest in and to the Software Product, including but not limited to any and all copyrights, trade marks, images, photographs, animations, video, audio, music, text, and "applets", incorporated into the Software Product, the accompanying printed materials, and any copies of the Software Product are owned by ASF The Software Product is protected by copyright laws and treaties, as well as trademark laws and treaties, patent laws and treaties, and other intellectual property laws and treaties 3.2 License Grant ASF HEREBY GRANTS TO CUSTOMER A PERSONAL, NON-EXCLUSIVE, AND LIMITED LICENSE TO USE THE SOFTWARE PRODUCT SOLELY FOR USE BY THE CUSTOMER IN ACCORDANCE WITH THE TERMS AND CONDITIONS OF THIS AGREEMENT CUSTOMER DOES NOT HAVE THE RIGHT TO GRANT SUBLICENSES IN THE SOFTWARE PRODUCT OR OTHERWISE DISTRIBUTE THE SOFTWARE PRODUCT 3.3 Installation and Use Customer may install and use the Software Product on no more than one computer at a time Customer shall limit access to the Software Product to a single user at any one time Customer is expressly prohibited from using the Software Product in a multi-user environment, server-based system or any other multi-user application Customer is granted the right to make one (1) copy of the Software Product for archival purposes 3.4 Limitations and Assignment Customer shall not reverse engineer, decompile, or disassemble the Software Product, nor allow a third party to reverse engineer, decompile, disassemble or create derivative works of the Software Product, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation ASF shall own any developments or derivative works that incorporate or use the Software Product or any portion thereof, and Customer hereby assigns and agrees to assign all right, title and interest in and to any such developments or derivative works of the Software Product 3.5 Separation of Components The Software Product is licensed as a single product Its component parts may not be separated for use on more than one computer 3.6 Use of Customer Information ASF may use, and Customer hereby grants ASF the right to use, Customer’s name and information in any customer reference list, press release issued by ASF regarding the licensing of the Software Product, billing purposes, advertising, notification of Customer of other products, services, and upgrades, or other such use as determined by ASF ASF agrees not sell any Customer information to third party bulk advertising companies WARRANTY 4.1 No Warranties THE SERVICES, PRODUCTS, AND ANY RELATED DOCUMENTATION, PROVIDED BY ASF IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND TO CUSTOMER OR ANY THIRD PARTY, INCLUDING, BUT NOT LIMITED TO, ANY EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OF THE SOFTWARE PRODUCT OR DOCUMENTATION, FITNESS FOR A CUSTOMER’S PURPOSE OR SYSTEM INTEGRATION, INFORMATIONAL CONTENT OR ACCURACY, NON-INFRINGEMENT, QUIT ENJOYMENT, AND TITLE CUSTOMER AGREES THAT ANY EFFORTS BY ASF TO MODIFY ITS SERVICES, PRODUCTS, OR RELATED DOCUMENTATION, SHALL NOT BE DEEMED A WAIVER OF THESE LIMITATIONS, AND THAT ANY ASF WARRANTIES SHALL NOT BE DEEMED TO HAVE FAILED OF THEIR ESSENTIAL PURPOSE 4.2 Limitation of Liability CUSTOMER AGREES THAT ASF SHALL NOT BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS, OR ANY DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN IF ASF WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR WAS NEGLIGENT OR GROSSLY NEGLIGENT The entire risk arising out of use or performance of the Software Product remains with the Customer If a particular state or PN 105920-001 Rev A 13 jurisdiction does not allow such exclusion or limitation of liability, and, as such, some portion of the above limitation may not apply to Customer, ASF’s total liability is limited to the greatest extent permitted by law GENERAL TERMS 5.1 Term This Agreement is effective until terminated by ASF Customer may terminate this Agreement by permanently deleting and destroying the Software Product, any back-up or archival copies, and any related documentation 5.2 Termination Without prejudice to any other rights, ASF may terminate this Agreement and all rights for Customer to use the Software Product, if the Customer fails to comply with the terms and conditions of this Agreement In such event, the Customer must destroy all copies of the Software Product and all of its component parts 5.3 Software Transfer Customer may transfer their entire rights in the Software Product to another person or entity so long as such person or entity agrees to all the terms of this Agreement and Customer does not retain any copies of the Software Product Customer may not lease or rent the Software Product 5.4 Export Control Customer agrees to comply with all export laws and restrictions and regulations of the United States or foreign agencies or authorities, and not to export or re-export the Software Product or any direct product thereof in violation of any such restrictions, laws or regulations, or without all necessary approvals As applicable, each party shall obtain and bear all expenses relating to any necessary licenses and/or exemptions with respect to its own export of the Software Product from the United States Neither the Software Product nor the underlying information or technology may be downloaded or otherwise exported or reexported (i) into Cuba, Iran, Iraq, Libya, North Korea, Sudan, Syria or any other country subject to United States trade sanctions covering the Software Product, to individuals or entities controlled by such countries, or to nationals or residents of such countries other than nationals who are lawfully admitted permanent residents of countries not subject to such sanctions; or (ii) to anyone on the U.S Treasury Department’s list of Specially Designated Nationals and Blocked Persons or the U.S Commerce Department’s Table of Denial Orders By downloading or using the Software Product, Customer expressly agrees to the foregoing and represents and warrants that it complies with these conditions 5.5 Choice of Law This Agreement shall be exclusively governed by and construed in accordance with the laws of the State of Texas, USA, without regard to the choice of law provisions of this or any other jurisdiction Any suit hereunder will be brought solely in the federal or state courts in Texas, USA, and Customer hereby submits to the personal jurisdiction thereof The 1980 United Nations Convention on Contracts for the International Sale of Goods shall not be applicable to the Development Agreements If Texas law is not held to apply to this Agreement for any reason, then in jurisdictions where warranties, guarantees, representations, and/or conditions of any type not provided hereunder may not be disclaimed, any such warranty, guarantee, representation and/or warranty is: (1) hereby limited to the period of either (a) thirty (30) days from the date of delivery; or (b) the shortest period allowed by law in the applicable jurisdiction if a thirty (30) day limitation would be unenforceable If this product was acquired outside the United States, then local laws may apply 5.6 Indemnity and Disputes ASF shall not undertake to resolve any disputes or litigation on Customer’s behalf involving the use of the Software Product, and Customer agrees to indemnify, hold ASF harmless, and defend ASF against any disputes involving the use of the Software Product If any dispute arises under this Agreement, the prevailing party shall be reimbursed by the other party for any and all legal fees and costs associated therewith 5.7 Severability If, for any reason, any provision of this Agreement is held invalid, such invalidity shall not affect the remainder of this Agreement, and this Agreement shall continue in force and effect to the full extent allowed by law 14 PN 105920-001 Rev A 5.8 Language No translation of this Agreement into any language other than English shall be of any effect in the interpretation of the Agreement 5.9 Force Majeure Neither party shall be in default or be liable for any delay, failure in performance (excepting the obligation to pay) or interruption of service resulting directly or indirectly from any cause beyond its reasonable control 5.10 Independent Contractors The parties are independent contractors There is no relationship of partnership, joint venture, employment, franchise, or agency between the parties Neither party will have the power to bind the other or incur obligations on the other's behalf without the other parties’ prior written consent Nothing herein is intended to, or shall be construed to, confer upon any person not a signatory party hereto any rights or benefits hereunder 5.11 Contact Should you have any questions concerning this Agreement, or if you desire to contact ASF for any reason, please write to: Applied Science Fiction, Inc., Software Sales Department, 8920 Business Park Drive, Austin, Texas 78759 USA 5.12 Entire Agreement This Agreement supersedes any and all other agreements, either oral or in writing, between the parties with respect to the matters stated herein, and this Agreement contains all of the covenants and agreements between the parties with respect thereto This Agreement may be amended or modified only in writing, and shall only be effective after affixation of both parties’ signatures 5.13 Consent The parties knowingly and express consent to the foregoing terms and conditions and each party is authorized to enter into this Agreement on behalf of its respective party IF YOU (CUSTOMER) DO NOT AGREE WITH ALL THE AFOREMENTIONED TERMS AND CONDITIONS, DO NOT COPY, INSTALL, OR USE THE SOFTWARE PRODUCT AND DESTROY ALL COPIES OF THE PRODUCT AND ANY ASSOCIATED DOCUMENTATION PN 105920-001 Rev A 15 ... Pack 6a), 2000, ME, XP Home, XP Professional Adobe Photoshop 5.0, 5.5, 6.0, or 7.0; Adobe Photoshop Elements 1.0 or 2.0; Adobe Photoshop LE 5.0; Adobe PhotoDeluxe® Home Edition 4.0; Jasc® Paint... require more memory) Macintosh OS 8.6, OS 9.x, OS X Adobe Photoshop 5.0, 5.5, 6.0, or 7.0; Adobe Photoshop LE 5.0; Adobe Photoshop Elements 1.0 or 2.0; Adobe PhotoDeluxe 2.0 Minimum display resolution:... GEM plug- in only officially supports the following applications: • • • • • Adobe Photoshop 5.0, 5.5, 6.0, or 7.0 (may also work with other Photoshop plug- in compatible applications) Adobe Photoshop