Thông tin tài liệu
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Cisco Systems, Inc.
Corporate Headquarters
Tel:
800 553-NETS (6387)
408 526-4000
Fax: 408 526-4100
WAN CiscoView for the MGX 8220
Release 2.0
January 2000
Customer Order Number: DOC-40328=
Text Part Number: 78-6543-02
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT
NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT
ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR
THEIR APPLICATION OF ANY PRODUCTS
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE
INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU
ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A
COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as
part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE
PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR
INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Access Registrar, AccessPath, Any to Any, AtmDirector, Browse with Me, CCDA, CCDE, CCDP, CCIE, CCNA, CCNP, CCSI, CD-PAC, the Cisco logo,
Cisco Certified Internetwork Expert logo, CiscoLink, the Cisco Management Connection logo, the Cisco NetWorks logo, the Cisco Powered Network logo,
Cisco Systems Capital, the Cisco Systems Capital logo, Cisco Systems Networking Academy, the Cisco Systems Networking Academy logo, the Cisco
Technologies logo, ConnectWay, Fast Step, FireRunner, Follow Me Browsing, FormShare, GigaStack, IGX, Intelligence in the Optical Core, Internet
Quotient, IP/VC, Kernel Proxy, MGX, MultiPath Data, MultiPath Voice, Natural Network Viewer, NetSonar, Network Registrar, the Networkers logo,
Packet, PIX, Point and Click Internetworking, Policy Builder, Precept, ScriptShare, Secure Script, ServiceWay, Shop with Me, SlideCast, SMARTnet, The
Cell, TrafficDirector, TransPath, ViewRunner, Virtual Loop Carrier System, Virtual Service Node, Virtual Voice Line, VisionWay, VlanDirector, Voice
LAN, Wavelength Router, Wavelength Router Protocol, WaRP, WebViewer, Workgroup Director, and Workgroup Stack are trademarks; Changing the
Way We Work, Live, Play, and Learn, Empowering the Internet Generation, The Internet Economy, and The New Internet Economy are service marks; and
ASIST, BPX, Catalyst, Cisco, Cisco IOS, the Cisco IOS logo, Cisco Systems, the Cisco Systems logo, the Cisco Systems Cisco Press logo,
Enterprise/Solver, EtherChannel, EtherSwitch, FastHub, FastLink, FastPAD, FastSwitch, GeoTel, IOS, IP/TV, IPX, LightStream, LightSwitch, MICA,
NetRanger, Post-Routing, Pre-Routing, Registrar, StrataView Plus, Stratm, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. or its
affiliates in the U.S. and certain other countries. All other trademarks mentioned in this document are the property of their respective owners. The use of the
word partner does not imply a partnership relationship between Cisco and any of its resellers. (9911R)
WAN CiscoView for the MGX 8220
Copyright © 2000, Cisco Systems, Inc.
All rights reserved.
CONTENTS
iii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Document Objectives
xxi
Audience
xx
Document Organization
xxii
Document Conventions
xx
Related Documentation
xxiii
CHAPTER
1
Product Overvie
1-1
General Description
1-1
Starting CiscoView and Displaying a Dev i c
1-1
Understanding the Displa
1-2
Printing a Displa
1-3
Changing CiscoView Operating Characteristi c
1-3
Organizing Management Informat i o
1-4
Categorizing Informati o
1-5
Displaying Configuration Informati o
1-5
Displaying Performance Informati o
1-5
Selecting a Car
1-5
Selecting a Line or P o r
1-5
Using Online He l
1-6
Jumps and pop- u p
1-6
Help Window Menu and Button Ba r
1-6
OverView and See Also Link
1-7
Exit Help
1-7
CHAPTER
2
Displaying and Configuring Node
2-1
Selecting a Devic
2-1
Node Dialo
2-1
Redundancy Info Dialo
2-3
LAN Interface Info Dialog
2-6
Serial Interface Info Dialog
2-8
Clock Source Info
2-10
Front Card Info
2-11
Contents
iv
WAN CiscoView for the MGX 822
Release 2.0, January 2000
CHAPTER
3
Configuring ASC Card
3-1
Selecting the Card and Displaying Card Paramet e r
3-1
ASC Card Configuration Dial o
3-1
ASC Features
3-3
Disk Diagnostic
3-3
CHAPTER
4
Configuring 4-Port Cards
4-1
Selecting the Card and Displaying Card Paramet e r
4-1
Card Configuration Dialo
4-1
Service Module Featur e
4-3
ATM Port RealTime Counters
4-3
Lines
4-5
Ports
4-8
Card/Ports (FR) Dialog
4-8
Card/Ports (ATM) Dilao
4-11
Channel
4-13
Card/Channels (Circuit Emulation) Dialog
4-14
Card/Channels (FR) Dialog
4-16
Card/Channels (ATM) Dialo
4-18
CHAPTER
5
Configuring CESM Cards
5-1
Selecting the Card and Displaying Card Paramet e r
5-1
CESM Card Configurati o
5-1
CESM Service Module Feature
5-3
Lines
5-4
Ports
5-6
Channel
5-9
CHAPTER
6
Configuring FRSM 2CT3 Cards
6-1
Displaying Card Paramete r
6-1
FRSM-2CT3 Card Configuration Dia l o
6-1
Service Module Featur e
6-3
FR Port Realtime Counters
6-4
LCN Partition Ty p
6-7
Ports
6-8
Channel
6-10
Contents
v
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Card/Channels (FR
6-10
Card/Channels State Info (FR
6-15
Lines Configuration
6-16
Physical Line Config(dsx3)
6-17
dsx3 Physical Line Alarm Configurat i o
6-19
dsx3 Counte r
6-20
dsx3 Counters (1 o f 2
6-21
dsx3Counters (2 of 2
6-22
Channelized Line Configuration (ds x 1
6-24
Channelized Line Alarm Configuration (dsx1
6-25
Channelized Line RealTime Counters (dsx 1
6-29
Logical Port
6-30
Logical Port Config (FR Port s
6-31
FR Port RTCs
6-34
FR Port RTCs (CLLM
6-37
FR Port Resource Partiti o
6-38
Logical Ports (Service Queue
6-39
CHAPTER
7
Configuring FRSM-2T3/E3 Cards
7-1
Displaying Card Paramete r
7-1
FRSM-2T3/E3 Card Configuration Di a l o
7-1
FRSM-2T3/E3 Service Module Feature
7-3
FR Port Realtime Counters
7-4
LCN Partition Ty p
7-7
Ports
7-8
Channel
7-10
Card/Channels (FR
7-10
Card/Channels State Info (FR
7-15
Lines Configuration
7-16
dsx3 Lines Configuratio
7-16
Physical Line Configuration (dsx3
7-17
dsx3 Physical Line Alarm Configurat i o
7-19
dsx3 Counte r
7-21
Configuring Logical Ports
7-24
FRSM Logical Ports Configuratio
7-25
FR Port RTCs
7-28
Contents
vi
WAN CiscoView for the MGX 822
Release 2.0, January 2000
FR Port RTCs (CLLM
7-31
FR Port Resource Partiti o
7-32
Logical Ports (Service Queue
7-33
CHAPTER
8
Configuring FRSM 8-Port Cards
8-1
Selecting the Card and Displaying Card Paramet e r
8-1
FRSM 8-Port Card Configuration Dialo
8-1
FRSM Service Module Feature
8-3
FR Port RealTime Counter
8-4
Lines
8-6
Ports
8-9
Channel
8-12
CHAPTER
9
Configuring FRSM-HS1 Cards
9-1
Selecting the Card and Displaying Card Paramet e r
9-1
FRSM-HS1 Port Card Configuration Dialo
9-1
FRSM-HS1 Service Module Feature
9-3
FR Port RealTime Counter
9-3
Ports
9-6
Channel
9-7
CHAPTER
10
Configuring FRSM HS1/B Cards
10-1
Displaying Card Paramete r
10-
FRSM HS1/B Ca r
10-
Service Module Featur e
10-4
FR Port Realtime Counters
10-4
LCN Partition Ty p
10-
Card/Ports (X.21/V.3 5
10-
Channel
10-9
Lines Configuration
10-13
Physical Line Config (X.21/V.3 5
10-1
Physical Line Alarm Config (X.21/V.35)
10-1
Logical Port
10-1
Logical Port Config (X.21/V.35 Ports
10-1
FR Port RTCs
10-2
FR Port RTCs (CLLM
10-2
Contents
vii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
FR Port Resource Partition Conf i
10-2
CHAPTER
11
Configuring FRSM-HS2 Cards
11-1
Selecting the Card and Displaying Card Paramet e r
11-1
FRSM-HS2 Card Configuration Dial o
11-1
FRSM-HS2 Service Module Feature
11-
FR Port RealTime Counter
11-4
Lines
11-6
Ports
11-8
CHAPTER
12
Configuring IMATM Cards
12-1
Selecting the Card and Displaying Card Paramet e r
12-1
IMATM Card Configuration Dialo
12-1
IMATM Service Module Features
12-
IMATM Clock Configuration
12-
IMATM Port Configuration
12-5
CHAPTER
13
Configuring AUSM Cards
13-1
Selecting the Card and Displaying Card Paramet e r
13-1
AUSM Card Configuration Dialo
13-
AUSM Service Module Featu r e
13-3
ATM Port RealTime Counters Configuration
13-4
Lines
13-6
Configuring dsx1 Line
13-
Configuring dsx3 Line
13-
Ports
13-1
Card/Ports (ATM)
13-1
Card/Ports (Forum Compliant IMA Groups)
13-1
Channel
13-1
CHAPTER
14
Configuring BNM-T3/E3 Cards
14-1
Selecting the Card and Displaying Card Paramet e r
14-1
BNM-T3/E3 Card Configuration Dia l o
14-2
Lines
14-3
Contents
viii
WAN CiscoView for the MGX 822
Release 2.0, January 2000
CHAPTER
15
Configuring BNM-155 Cards
15-1
Selecting the Card and Displaying Card Paramet e r
15-1
BNM-155 Card Configuration Dia l o
15-1
Lines
15-3
CHAPTER
16
Configuring SRM 3T3 Cards
16-
Selecting the Card and Displaying Card Paramet e r
16-1
SRM 3T3 Card Configuration Dialog
16-1
Lines
16-3
CHAPTER
17
Displaying and Configuring Li n e
17-1
Selecting a Lin
17-1
Configuring DSX1 Line
17-1
Physical Line Configuration (DSX1
17-2
DSX1 Physical Line Alarm Configuratio
17-4
DSX1 Line RealTime Counters
17-
DSX1 PLCP Configuration
17-6
DSX3 Lines Configuratio
17-6
Physical Line Configuration (dsx3)
17-
DSX3 Physical Line Alarm Configuratio
17-8
DSX3 Counters
17-1
DSX3 PLCP Alarm Configuration
17-12
Channelized Line Configurati o
17-1
Channelized Line Configuration (DSX1
17-1
Channelized Line Configuration (DSX3
17-1
X21 Lines Configuration Dial o g
17-16
X21 Line Config
17-17
X21 Physical Line Alarm Configurati o
17-1
Sonet Lines Configura t i o
17-1
Physical Line Config (Sonet)
17-1
Physical Line Alarm Config (Sonet
17-2
Sonet Counters
17-21
ATM Line
17-2
SRM Line Configuratio
17-2
SRM Counters
17-2
SRM Line Distribution (SRM 3T3)
17-2
Contents
ix
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Logical Port
17-2
CESM Ports Configuration
17-2
Logical Port Config (CESM
17-2
FRSM Ports Configurati o
17-2
FRSM Logical Ports Configuratio
17-25
FR Port RTCs
17-2
FR Port RTCs (CLLM
17-2
X21 Frame Ports Configuratio
17-2
CHAPTER
18
Monitoring Li n e
18-1
Selecting a Lin
18-1
Monitoring DSX1 Counte r
18-1
Monitoring DSX3 Counte r
18-3
Monitoring DSX3 PLCP Count e r
18-6
Monitoring Logical Port
18-
FR Port Monitor (RCV) Counter
18-
FR Port Monitor (XMT) Counte r
18-8
FR Port Monitor (ILMI/CLLM) Count e r
18-
ATM-ILMI Port RealTime Counters
18-1
ATM RealTime Counters
18-10
Channel Monitorin
18-1
FRSM Channel Counters (R C V
18-1
FRSM Channel Counters (X M T
18-1
Channel SAR Counte r
18-14
CESM Channel Counte r
18-1
Monitoring ILMI
18-1
Monitoring IMA Group Count e r
18-1
Monitoring BNM Counter
18-17
Monitoring SRM Counter
18-17
Contents
x
WAN CiscoView for the MGX 822
Release 2.0, January 2000
[...]... the connector, then select Configure>Line • Select the connector, right-click to display the Line pop-up menu, then select Configure • Select the connector, then click the Configure button on the toolbar To display the configuration parameters for a particular line/port, select the name of the category from the Category pull-down menu at the top of the dialog WAN CiscoView for the MGX 8220 Release 2.0,... 18-17 18-1 18-17 WAN CiscoView for the MGX 8220 Release 2.0, January 200 xix Tables WAN CiscoView for the MGX 822 xx Release 2.0, January 2000 Preface This section discusses the objectives, audience, organization, and conventions of the WAN CiscoVie for the MGX 8220 User Guide Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product The Documentation... configuration information in the Configuration windows The information is displayed as a list of fields for a single port, or as a table that includes fields for multiple ports Displaying Performance Informatio CiscoView displays performance information using the Monitor menu in the main window to display performance information To view performance information, select Monitor from a component pop-up menu Performance... CiscoView Open Device Window WAN CiscoView for the MGX 8220 Release 2.0, January 200 1-1 Chapter 1 Product Overview Understanding the Display Step 2 In the Host Name section, type the IP address or name of the host and the read community name of the device It you are going to perform configuration tasks on the device, you must also provide the write community name of the device Step 3 Press Enter The. .. display the configuration parameters for a particular card, select the name of the category from the Category pull-down menu at the top of the dialog Selecting a Line or Port There are five ways to select the line or port to display the appropriate line configuration dialog: • Double-click the connector on the rear view of the card • Double-click the Port LED on the front view of the card • Select the. .. instructions for using WAN CiscoView for the MGX 8220 WAN CiscoView is a GUI-based device management software application that allows you to: • display a graphical representation of the network device • display configuration and performance information • perform minor configuration tasks • perform minor troubleshooting tasks Audience This publication is intended for anyone who operates or manages aWAN and... Configuring Lines,” provides instructions for displaying and configuring line information on the WAN CiscoView interface Chapter 18, “Monitoring Lines,” provides instructions for monitoring line information on the WAN CiscoView interface WAN CiscoView for the MGX 822 xxii Release 2.0, January 2000 Preface Document Conventions Document Conventions Command descriptions use these conventions: • Commands and keywords... See Also links in the help window topics You can select the Overview link to obtain background information for the procedure described in the current help window Select the See Also link to display a list of related topics and go directly to those topics from the current help window Exit Help Select File>Exit on the menu bar in the Help window to exit Help WAN CiscoView for the MGX 8220 Release 2.0,... Select the gray area surrounding the slots, right-click to display the Device pop-up menu, then select Configure • Select the gray area surrounding the slots, then click the Configure button on the toolbar To display the configuration parameters for a particular device category, select the name of the category from the Category pop-up menu at the top of the dialog The categories of device configuration... windows Performance information is displayed in CiscoView Monitor windows, which are sometimes referred to as dashboards 2 Configuration and performance information is displayed for devices, cards, and ports WAN CiscoView for the MGX 822 1-4 Release 2.0, January 2000 Chapter 1 Product Overview Selecting a Card Categorizing Information CiscoView displays different categories of information for each device, . resellers. (9911R)
WAN CiscoView for the MGX 8220
Copyright © 2000, Cisco Systems, Inc.
All rights reserved.
CONTENTS
iii
WAN CiscoView for the MGX 8220
Release.
Contents
x
WAN CiscoView for the MGX 822
Release 2.0, January 2000
FIGURES
xi
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Figure 1-1 CiscoView Main
Ngày đăng: 24/01/2014, 19:20
Xem thêm: Tài liệu WAN CiscoView for the MGX 8220 pptx, Tài liệu WAN CiscoView for the MGX 8220 pptx