... packets between local area networks 1 92. 168.1.0 and
1 92. 168 .2. 0.
Router E0 Interface IP Address Subnet mask
Router – A 1 92. 168.1.1 25 5 . 25 5 . 25 5 .0
Router – B 1 92. 168 .2. 1 25 5 . 25 5 . 25 5 .0
b. Connecting ... default Gateway is required on local area networks
that are connected to a router.
Computer IP Address Subnet mask Default Gateway
PC – A 1 92. 168...
... creating 2- workstation
microsegments between ports. They are appropriate for small to large LANs with moderate to heavy
traffic.
In addition to the physical and data link connections, which are ... and the switch will be accomplished using a cat 5 or 5e
straight-through patch cable. Locate two cables that are long enough to reach from each PC to
the switch. Attach one end to the NI...
... terminal is a DB- 25 , an RJ- 45 to DB- 25 adapter
will be needed. Both of these adapters typically come with a Cisco router or switch.
Step 4 Locate or build a rollover cable
Use a rollover ... popup enter a name in the connection Name field and select OK.
1 - 6 CCNA 1: Networking Basics v 3.0 - Lab 5. 2. 7 Copyright 20 03, Cisco Systems, Inc.
Lab 5. 2....
... off
• Remove and store the cables and adapter
2 - 5 CCNA 4: WAN Technologies v 3.0 - Lab 5. 2. 1 Copyright 20 03, Cisco Systems, Inc.
Please refer to the chart at the end of the lab to correctly ... performed.
5 - 5 CCNA 4: WAN Technologies v 3.0 - Lab 5. 2. 1 Copyright 20 03, Cisco Systems, Inc.
Router Interface Summary
Router
Model
Ethernet
Interface #...
... 1 - 5 CCNA 2: Routers and Routing Basics v 3.0 - Lab 5. 2. 3 Copyright 20 03, Cisco Systems, Inc.
Lab 5. 2. 3 Managing Configuration Files with TFTP
Objective
• Backup a copy of a router ... erase and reload instructions at the end of this lab. Perform those steps on all
routers in this lab assignment before continuing.
5 - 5 CCNA 2: Routers and Routing Basics...
... router and the hub or switch will be accomplished using a Category
5 straight-through patch cable. Locate a patch cable that is long enough to reach from the router
to the hub. Be sure to examine ... computer connections, insure that the link light on the NIC and the hub or switch
interface are both lit.
2 - 2 CCNA 1: Networking Basics v 3.0 - Lab 5. 2. 3a Copyright 20 03,...