... adecomposition will often follow the physical partitioning of the system; for instance, in the machining cell described above, separate programs might be defined for the machiningstation, the measuring station, ... (4.3 of IEC61131-3). For instance, the main program for the machining station in the cell describedabove may be an SFC describing the sequence of machining operations to be performed,while the ... converted to one of the integer types (SINT, INT, DINT, LINT, USINT, UINT, UDINT, orULINT) using one of the BCD_TO_** conversion functions defined in 2.5.1.5.2 of IEC 61131-3, in order to be manipulated...