... latest update for the Catalyst 2950. This has the same file name
stem as the current image. However, for the purpose of the lab, assume that this is an update.
The IOS update release contains ...
Lab 6.2.9 Firmware Upgrade of a Catalyst 2900 Series Switch
Objective
• Create a basic switch configuration verify it.
• Upgrade the IOS and HTML files from a file supplied ......
... in CCNA 3 and CCNA 4 it is necessary to start with an unconfigured
switch. Use of a switch with an existing configuration may produce unpredictable results. These
instructions allow preparation ... terminal
ALSwitch(config)#no enable secret
ALSwitch(config)#enable password Cisco
ALSwitch(config)#line console 0
ALSwitch(config-line)#password cisco
ALSwitch(config-line)#exit
ALS...
...
Lab 6.2.8 Password Recovery Procedure on a Catalyst 2900 Series Switches
Objective
• Create and verify a basic switch configuration verify it.
• Change passwords to the password recovery ... the answer is no, troubleshoot the host and switch configurations.
Step 4 Reset the console password
a. Have a classmate change the console and VTY passwords on the switch. Save the c...
... enable.
If prompted for a password, enter class (if that does not work, ask the instructor).
Switch& gt;enable
2. Remove the VLAN database information file.
Switch# delete flash:vlan.dat ... 3.0 - Lab 6.2.9 Copyright 2003, Cisco Systems, Inc.
Erasing and Reloading the Switch
For the majority of the labs in CCNA 3 and CCNA 4 it is necessary to start with an unconfigured...