Prismatic machining

Catia prismatic machining book 01

Catia prismatic machining book 01
... operations in a machining process - Define machining operations in a machining process - Replay the machining operations, visualizing the material removal - Modify part geometry, fixing machining operations ... Assembly Design books for review Types of NC Machines There are many different types of CNC machines used in production lines all over the world The prismatic machining portion of CATIA V5 concentrates ... 129 Machining Axes 137 Machine Rotation 144 Advanced Machining Topics...
  • 46
  • 288
  • 1

Catia prismatic machining book 02

Catia prismatic machining book 02
... part CATIA V5 Prismatic Machining has facilities to view material removal and therefore by defining the stock material, you can observe the material being removed to make sure you did not miss machining ... begin machining a part, you should have it opened first Change the workbench to the Prismatic Machining workbench This can be done by either selecting pull down menu Start and then finding Prismatic ... Prismatic Machining, or by selecting the change workbench icon and then the Prismatic Machining workbench It is not mandatory that you have the assembly open that you are going to be machining...
  • 21
  • 232
  • 1

Tài liệu Catia Prismatic Machining Book P2 ppt

Tài liệu Catia Prismatic Machining Book P2 ppt
... CATIA Prismatic Machining Introduction, Page 28 CATIA V5R7 ©Wichita State University CATIA Prismatic Machining CATIA V5R7 Toolbars Inserts a new part ... utilized in the Prismatic Machining workbench You will define the initial setup conditions of the machining process © Wichita State University Review, Page 41 CATIA Prismatic Machining CATIA V5R7 ... State University CATIA Prismatic Machining CATIA V5R7 Part Operation Setup This section will investigate how to invoke the Prismatic Machining workbench and prepare your part for machining operations...
  • 20
  • 182
  • 1

Tài liệu Catia Prismatic Machining Book P1 doc

Tài liệu Catia Prismatic Machining Book P1 doc
... Table of Contents, Page iii CATIA Prismatic Machining Table of Contents, Page iv CATIA V5R7 ©Wichita State University CATIA Prismatic Machining CATIA V5R7 Introduction CATIA Version Manufacturing ... tool cuts Introduction, Page ©Wichita State University CATIA Prismatic Machining CATIA V5R7 Machining Modes There are two different types of machining modes There are axial modes, which include ... operations to reflect changes - Generate Apt code from machining operations © Wichita State University Introduction, Page CATIA Prismatic Machining CATIA V5R7 Designing and drawing parts is an important...
  • 30
  • 259
  • 1

Machining of Hard Materials

Machining of Hard Materials
... to machine hardened materials up to 65 HRC, also for high-speed cutting Cermet (solid titanium carbide) works well for continuous cutting of case-hardened materials Machining of Hard Materials ... and (b) complete machining of a gear in the hardened state Machining of Hard Materials 105 ing allowance of 20–30 μm remains for finishing grinding at the extremely high speed of 100 m/s, using ... speed (a) (b) Figure 4.27 Examples of hard milling (a) a convex surface and (b) five-axis hard machining Machining of Hard Materials 121 Figure 4.28 Examples of dies and moulds [45]: (a) punch...
  • 30
  • 179
  • 0

Tài liệu Vertical machining center application pptx

Tài liệu Vertical machining center application pptx
... 4,35 Stunden Mit freundlicher Unterstützung von www.leiss-gmbh.de Application Case Study Anwendungsbeispiel Component: Darstellung: Machining of a blow-mould (8 units simultaneous) Fräsbearbeitung ... DMC 100 V Material: Werkstoff: W302 42 HRC W302 42 HRC Total time: Bearbeitungszeit: hours Std Application Case Study Anwendungsbeispiel Component: Darstellung: Mould for automobile wheel rim ... of surface: Oberflächengüte: 2µm 2µm Total time: Bearbeitungszeit: 13 h 45 13 h 45 46 HRC 46 HRC Application Case Study Anwendungsbeispiel Component: Darstellung: Machine: Maschine: Material: Werkstoff:...
  • 33
  • 189
  • 0

Tài liệu Soft Computing for Optimal Planning and Sequencing of Parallel Machining Operations docx

Tài liệu Soft Computing for Optimal Planning and Sequencing of Parallel Machining Operations docx
... presented our study of the optimal planning and sequencing for parallel machining operations The combinatorial nature of sequencing and the complication of having precedence and mode constraints ... 8 Soft Computing for Optimal Planning and Sequencing of Parallel Machining Operations Yuan-Shin Lee‫ء‬ North Carolina State University ... cycle time Because of the relatively new trend of applying parallel machines in industrial manufacturing, only a handful of papers are found on sequencing machining operations for parallel machines...
  • 34
  • 204
  • 0

Advanced machining processes

Advanced machining processes
... Advanced Machining Processes This page is intentionally left blank Advanced Machining Processes Nontraditional and Hybrid Machining Processes Hassan El-Hofy Production ... Chapter Material Removal Processes 1.1 Introduction 1.2 History of Machining 1.3 Traditional Machining 1.3.1 Machining by cutting 1.3.2 Machining by abrasion 1.4 Nontraditional Machining 1.4.1 Single-action ... hybrid machining processes The book is written in eight chapters: Chapter 1: Material Removal Processes Chapter 2: Mechanical Processes Chapter 3: Chemical Processes Chapter 4: Electrochemical Processes...
  • 286
  • 391
  • 4

Tài liệu Machining of Complex Sculptured Surfaces doc

Tài liệu Machining of Complex Sculptured Surfaces doc
... Machining of Complex Sculptured Surfaces J Paulo Davim Editor Machining of Complex Sculptured Surfaces 123 J Paulo Davim Department of Mechanical Engineering University of Aveiro Campus ... Chapter of this book provides the flank milling of complex surfaces Chapter is dedicated to 5-axis flank milling of sculptured surfaces Chapter described high performance 5-axis milling of complex sculptured ... researches for this field of the machining of complex sculptured surfaces v vi Preface The Editor acknowledges Springer for this opportunity and for their enthusiastic and professional support Finally,...
  • 266
  • 555
  • 0

Surface MachiningStudent Notes:CATIA TrainingFoilsSurface Machining Copyright DASSAULT SYSTEMES Version 5 pdf

Surface MachiningStudent Notes:CATIA TrainingFoilsSurface Machining Copyright DASSAULT SYSTEMES Version 5 pdf
... Operation: Introduction Plunge Milling: Introduction Copyright DASSAULT SYSTEMES 32 35 43 48 49 50 51 52 53 54 56 57 58 64 65 66 70 82 Surface Machining Student Notes: Table of Contents (3/3) 3-Axis ... concepts Copyright DASSAULT SYSTEMES Surface Machining Introduction to Surface Machining Student Notes: In this lesson, you will learn basics of Surface Machining Copyright DASSAULT SYSTEMES About Surface ... 0°to 5 sloping , surfaces from 5 to 45 and vertical surfaces from 45 to 90° These angles are calculated with respect to the tool axis Copyright DASSAULT SYSTEMES 38 Surface Machining Machining/slope...
  • 161
  • 309
  • 2

Handbook of machining and metalworking calculations

Handbook of machining and metalworking calculations
... HANDBOOK OF MACHINING AND METALWORKING CALCULATIONS This page intentionally left blank HANDBOOK OF MACHINING AND METALWORKING CALCULATIONS Ronald A Walsh McGRAW-HILL ... basic and complex machining and metalworking operations would be difficult or impossible without the use of these branches of mathematics In this chapter and other subsections of the handbook, ... basic and important aspects of these branches of mathematics will be covered in detail Examples of typical machining and metalworking problems and their solutions are presented throughout this handbook...
  • 379
  • 471
  • 0

Xem thêm

Từ khóa: kinematic geometry of surface machiningauthor of kinematic geometry of surface machiningtimesaving surface machining processesoptimal surface machining processpower and energy relationships in machiningkinematic geometry of surface machining freegeneration of surfaces kinematic geometry of surface machiningkinematic geometry of surface machining pdfprocess monitoring and control of machining operationsdevelopments in machining of ceramic materialsultrasonic machining of ceramics2cutter accessibility at a point on the machining surfacegia cễng l machining of holesgia cễng ren thread machiningđ6 4 gia công ren bằng biến dạng dẻo thread machining by rollingĐiều khiển bình trộn hóa chất PLCCATALOGLOGUE CỐP PHA FUVIbao cao nguyen ly bao quan thuc phamDE THI VAO 10 MON TOAN HA NOI TU 2006 DEN 2017Hướng dẫn giải đề thi Luật thương mại quốc tếbài giảng Quản trị công nghệTuần 15 giáo án lớp 3 soạn theo định hướng phát triển năng lực học sinhTiểu luận môn kinh tế lượngbài tập trắc nghiệm mốn tiếng trung trường DHKHXH&NV TP.HCMbài tập trắc nghiệm mốn tiếng trung trường DHKHXH&NV TP.HCMBài 12. Nhật Bản giữa thế kỉ XIX - đầu thế kỉ XXBài 60. Động vật quý hiếmCHUYÊN ĐỀ THỂ TÍCH KHỐI CHÓPCƯPHƯƠNG PHÁP TƯ DUY GIẢI TOÁN TRẮC NGHIỆMbài tập trắc nghiệm mặt cầu, hình cầu và khối cầubài tập Vat ly nguyen tuBài 10. Đồng chíKẾ HOẠCH HỘI THI GV DẠY GIỎI CẤP TRƯỜNG 2017-2018Tuần 3. So sánh. Dấu chấmBài 43. Rễ cây