... Blur - cho Radius = pixel nhấn OK tiếp tục vào Layer text giống hình Filter / Stylize / Solarize Nhấn tổ hợp phím Ctrl + L để mở hộp thoại Levels điền giá trị hình chọn OK(input level: - 1.00 - ... click chuột vào layer text để Load Selection Vào menu Select chọn Save Selection/OK Bây layer text giống hình Sau Save Selection bạn nhấn Ctrl + D để bỏ chọn Với layer text chọn...
... Acting Design “Oil-fired” “Gas-fired” Caterpillar Indeco Tramac Krupp - Allied Furukawa - Kent NPK Toku - Teledyne Soosan - Stanley Caterpillar Impact Products Ltd Caterpillar Hammers Reliability ... tie rod head - Follow torque sequence in Service Manuals Tie Rod Washer (Chamfer up) Up Tie Rod Nut Example: Model H70 Step 1-4 5-8 9-1 2 all rods Torque 75 ft-lbs...
... in the mid-range of stroke NOR - fully retracted Caterpillar Impact Products Ltd Caterpillar Hammers Correct Working Methods Temperatures If ambient temperature is lower than -4 °F/ -2 0°C, the ... Adjusting • Pre-Delivery Inspection • H45 - H100 Flow Test • H45 - H100 Operating Test • H70 Flow Graph - example • H115s - H180s Flow Test • H115s - h180s Operati...
... Return-RH 1/4" BSPP Supply-LH 3/8" BSPP Supply-LH 3/8" BSPP Air Connection location port size Supply-LH 1/4" BSPP Supply-LH 3/8" BSPP Return-RH 3/8" BSPP See Note Supply-LH 3/8" BSPP Return-RH ... BSPP Caterpillar Impact Products Ltd www.oto-hui.com Caterpillar Hammers Autolube - Large Hammers (H115s-H180s) Port is located on upper valve housing next to the supply or return port -...
... regulations These include small and medium: - Track-type tractors - Wheel loaders - Track loaders - Underground loaders - Wheeled excavators - Paving products - Motor graders - Backhoe loaders Many of ... are: - Configuration: Six cylinders inline, 24-valve crossflow cylinder head - Fuel System: Direct injection, common rail - Aspiration: Turbo-ATAA...
... 32 0D- 33 6D hydraulic excavators, and diagnose and repair problems in all 32 0D- 33 6D Hydraulic Excavators REFERENCES 32 0D Hydraulic Excavator Specalog 32 3D L and 32 3D LN Hydraulic Excavators 32 4D ... GROUP AND RETURN SYSTEM IMPLEMENT CIRCUITS SWING SYSTEM TRAVEL SYSTEMS TOOL CONTROL SYSTEM (UNDERDEVELOPMENT) DEMAND FAN SYSTEMS Electro-hydraulic Demand Fan Visconic Demand Fan (Att...
... 32 5D FM and 33 0D FM did not change - The 32 5D HD HW did not change into 32 9D HD HW This model is being discontinued However, the 33 0D HD HW changed to the 33 6D HD HW SERV185 2-0 2 08/08 -5 - Text ... 30 0D and the 33 0D became the 33 6D for most machine configurations The 32 5D MH and 33 0D MH did not change The 32 5D FM and 33 0D FM did not change The 32 5D HD...
... 32 5D FM and 33 0D FM did not change - The 32 5D HD HW did not change into 32 9D HD HW This model is being discontinued However, the 33 0D HD HW changed to the 33 6D HD HW SERV185 2-0 2 08/08 -5 - Text ... lever/pedal is moved suddenly from the NEUTRAL position, the rod is pushed downward The rod moves the dampening piston downward The hydraulic oil below the dampening pisto...