... marks on the radar display To show the SART marks only on the radar display, detune the radar receiver by the manual tuning out of best tuning condition This erases or weakens all normal radar echoes, ... OPERATION 1.1 What is Radar? 1-1 1.2 How Ships Determined Position Before Radar 1-1 1.3 How Radar Determines Range 1-1 1.4 How Radar Determines Bearing 1-1 1.5 Radar Wave...
... dB SNR: 22.0dB WAAS/DGPS SETUP menu The cursor is selecting MODE; press the [ENT] key GPS WAAS INT BEACON EXT BEACON AUTO GPS position fixing DGPS position fixing WAAS/DGPS mode options 34 One-degree ... to close the menu 7.3 DGPS setup Press the [MENU] key once or twice to open the menu Choose WAAS/DGPS WAAS/DGPS SETUP MODE : GPS WAAS SEARCH: AUTO CORRECTIONS DATA SET: DGPS STATION: AU...
... The GP-150 -DUAL consists of two dual differential GPS navigator systems and an interface unit Each GPS navigator consists of a display unit combining a GPS receiver and video plotter, a GPS antenna ... CONFIGURATION GPS ANTENNA GPA-017S/018S/019S GPS ANTENNA GPA-017S/018S/019S GPS ANTENNA GPA-017S/018S/019S GPS/ BEACON ANTENNA DISTRIBUTOR MD-GB2* DISPLAY UNIT DISPLAY UNIT G...
... continuous updates of range and bearing to that point • DGPS capability - with built-in DGPS beacon kit accepts DGPS correction data from external DGPS beacon receiver • Menu-driven operation • Bright ... step 7.7 WAAS/DGPS Alarm The WAAS/DGPS alarm sounds when the WAAS/DGPS signal is lost This alarm may be enabled or disabled as below 1) Press MENU ESC and 2) Press or to select WAAS/DGPS 3)...
... vii EQUIPMENT LISTS viii PRINCIPLE OF NAVTEX SYSTEM 1-1 1.1 How NAVTEX Works .1-1 1.2 NAVTEX System Operation 1-1 1.3 Message Format ... information and other navigational information for NAVTEX receiver-equipped vessels sailing in coastal waters The FURUNO NX-300 NAVTEX receiver receives NAVTEX messages and automatically displays them ... category information The service range o...
... pages Safety 96-8700 rev T January 2008 96-8700 rev T January 2008 Safety MILL W ARNING D ECALS Safety 96-8700 rev T January 2008 LATHE WARNING DECALS 96-8700 rev T January 2008 Safety OTHER S AFETY ... 96-8700 rev T January 2008 The Information contained in this manual is constantly being updated The latest updates, and other helpful information is available online as...