Coulson Richardson’s Chemical Engineering Volume 6 (solution)

... 6.00 5. 00 0.26 1.3 6 .5 32 .5 162 .5 3.00 0.18 0 .54 1.62 4.86 1.3 75 0.23 0.316 0.4 35 0 .59 8 0.822 0.67 0.08 0. 053 6 0.0 359 0.0241 0.0161 0.37 0.17 0.0629 0.0233 0.0086 0.00319 0.18 75 0.03 0.0 056 0.001 05 ... 0 .5 ) √ 10 = 2C (1/3.1)(1 − 1/4.030 .5 ) = (2C × 0 .56 8 × 0 .50 2) C = 17 .54 kW mm0 .5 /(kg/s) Thus: Case 2: L1 = 7 .5 mm, Hence: L2 = 2.0 mm and q = (7 .5/ 2.0) = 3. 75 E = × 17 .54 (1/2.0)(1 − 1/3. 750 .5 ... then: a = 2.41 and b = 1. 25 × 10−4 I = 51 61 ln[(1 .55 − 0.977)/(1 .55 + 0.977)][(1 .55 − 1.19)/(1 .55 + 1.19)] = 2816 Thus: t = [2816(1/1.89)] = 1490 s ( 25 min) PROBLEM 3. 15 A mixture of quartz and...

... Introduction Definitions and Principles Unit Operations Unit Systems 4 Physical Quantities / SI Units / CGS Units / Gas Constant / FPS Engineering Units / Conversion of Units / Units and Equations Dimensional ... Operations Involving Particulate Solids Properties and Handling of Particulate Solids 945 Characterization of Solid Particles Properties of Masses of Particles 945 951 Storage and Conveying of ... Scale Properties of Liquid Water Properties of Saturated Steam and Water Viscosities of Gases Viscosities of Liquids Thermal Conductivities of Metals Thermal Conductivities of Various Solids...

... Companies, Inc All rights reserved No part of this Manual may be displayed, reproduced or distributed in any form or by any means, without the prior written permission of the publisher, or used beyond ... student using this Manual, you are using it without permission Page - PROPRIETARY MATERIAL © The McGraw-Hill Companies, Inc All rights reserved No part of this Manual may be displayed, reproduced ... Companies, Inc All rights reserved No part of this Manual may be displayed, reproduced or distributed in any form or by any means, without the prior written permission of the publisher, or used beyond...

... velocity System volume Bulk modulus Void fraction Fluid relaxation time Fluid viscosity Infinite shear viscosity (Bingham plastics) Fluid density Gas, liquid densities Dispersed phase density Surface ... and scale-up, it is useful to arrange variables into dimensionless groups Table 6- 7 lists many of the dimensionless groups commonly found in fluid mechanics problems, along with their physical ... The subgrid-scale Reynolds stress is estimated by a turbulence model The Smagorinsky model, a one-equation mixing length model, is used in most commercial codes that offer LES options and is also...

... corrosion in the metallic parts at the interior of the engine The H2S is an inorganic acid that attacks the surface of metals when they are 134 Mass Transfer in Chemical Engineering Processes placed in ... 2 56 195.85 303.75 293. 46 Methanol 57 2 56 12.38 26. 23 23.73 57 2 56 158.04 297.82 283.10 45 165 178.93 250.71 210 .65 n-Hexane 56 2 56 5.14 8.41 8.00 50 165 59.27 100.14 92.84 45 2 56 351.32 1554 .66 ... (2011) Recent advances in the study on capsaicinoids and capsinoids, European Journal of Pharmacology, Vol .65 0, 1-7 132 Mass Transfer in Chemical Engineering Processes Ying-Yue, W.; Chi-Tzong,...