0
  1. Trang chủ >
  2. Kỹ Thuật - Công Nghệ >
  3. Hóa học - Dầu khí >

ASTM D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

Tài liệu Standard Test Method forPour Point of Petroleum Products1 ppt

Tài liệu Standard Test Method forPour Point of Petroleum Products1 ppt

... Temperature of Residual Fuel Oil4D 2500 Test Method for Cloud Point of Petroleum ProductsD 3245 Test Method for Pumpability of Industrial Fuel OilsD 5853 Test Method for Pour Point of Crude ... Designation: D 97 – 05Designation: 15/95An American National Standard Standard Test Method forPour Point of Petroleum Products1This standard is issued under the fixed designation D 97; the number ... the IP, this test method is under the jurisdiction of the StandardizationCommittee. This test method was adopted as a joint ASTM-IP Standard in 1965.2Statements defining this test and its significance...
  • 9
  • 597
  • 0
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

... in Tests of Hydraulic Cement C305 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic ConsistencyC349 Test Method for Compressive Strength of Hydraulic- Cement Mortars ... ASTM Standards:3C91 Specification for Masonry Cement C114 Test Methods for Chemical Analysis of Hydraulic Cement C150 Specification for Portland Cement C230/C230M Specification for Flow Table for ... `,`,```,```,,``,,``,,``,```,,`-`-`,,`,,`,`,,` Designation: C109/C109M – 11a Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) 1This standard is issued under the fixed designation...
  • 10
  • 851
  • 0
ASTM D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

ASTM D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

... Designation: D5453 − 12 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence 1This standard ... approved in 2009 as D5453 09. DOI:10.1520 /D5453- 12.2 For referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards ... 3—Materials meeting the requirements in 6.8 provide a moreuniform injection of the sample into the boat by wicking any remainingdrops of the sample from the tip of the syringe needle prior to introductionof...
  • 11
  • 1,682
  • 2
ASTM D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

ASTM D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

... REGISTERWASHINGTON, D.C.Document Name: CFR Section(s): Standards Body: e ASTM D129: Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) 40 CFR 60.106(j)(2)American Society for ... considered legally binding upon all citizens and residents of the United States of America. HEED THIS NOTICE: Criminal penalties may apply for noncompliance. Official Incorporator:THE EXECUTIVE ... AMERICALegally Binding DocumentBy the Authority Vested By Part 5 of the United States Code § 552(a) and Part 1 of the Code of Regulations § 51 the attached document has been duly INCORPORATED...
  • 6
  • 406
  • 4
ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

... Point of Petroleum Products (Automatic Pressure Pulsing Method) D5950 Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) D5985 Test Method for Pour Point of Petroleum Products (Rotational ... Designation: D86 − 12 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure 1This standard is issued under the fixed designation D86; the number immediately following ... Practice for Automatic Sampling of Petroleum and Petroleum Products D4953 Test Method for Vapor Pressure of Gasoline andGasoline-Oxygenate Blends (Dry Method) D5190 Test Method for Vapor Pressure of...
  • 28
  • 894
  • 1
ASTM D93 Standard Test Methods for Flash Point by PenskyMartens Closed Cup Tester

ASTM D93 Standard Test Methods for Flash Point by PenskyMartens Closed Cup Tester

... Documents2.1 ASTM Standards:2D56 Test Method for Flash Point by Tag Closed Cup Tester D3941 Test Method for Flash Point by the EquilibriumMethod With a Closed- Cup ApparatusD4057 Practice for Manual ... Designation: D93 − 13Designation: 34/99 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester 1This standard is issued under the fixed designation D93; the number immediately ... the test cup, test cover and shutter,2 For referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards...
  • 18
  • 694
  • 1
ASTM D482 Standard Test Method for Ash from Petroleum Products

ASTM D482 Standard Test Method for Ash from Petroleum Products

... Designation: D482 − 13Designation: 4/96 Standard Test Method for Ash from Petroleum Products 1This standard is issued under the fixed designation D482; the number immediately ... Test Method for Sulfated Ash from Lubricating Oilsand AdditivesD4057 Practice for Manual Sampling of Petroleum and Petroleum Products D4177 Practice for Automatic Sampling of Petroleum and Petroleum ... referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards volume information, refer to the standard s...
  • 4
  • 1,008
  • 2
ASTM D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

ASTM D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

... Documents2.1 ASTM Standards:2D86 Test Method for Distillation of Petroleum Products atAtmospheric PressureD189 Test Method for Conradson Carbon Residue of Petro-leum Products D482 Test Method for Ash ... Designation: D524 − 10Designation: 14/94 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products 1This standard is issued under the fixed designation D524; the number immediately ... notapply to all materials which can be tested because the carbon residue test is applicable to a wide variety of petroleum products. The Ramsbottom Carbon Residue test method is limited to those samples...
  • 9
  • 1,419
  • 3
ASTM D976  06 Standard Test Method for Calculated Cetane Index of Distillate Fuels

ASTM D976 06 Standard Test Method for Calculated Cetane Index of Distillate Fuels

... Theequation for Calculated Cetane Index in Test Method D976 80and in this version (D976 06) of the test method are the same.4. Equation for Calculated Cetane Index 4.1 The Calculated Cetane Index ... result of a larger degree of offset between Test Method D976 Cetane Index and the results of Test Method D613 over theentire range of the correlation. Generally, it has been found thatuse of Test ... Designation: D976 06 (Reapproved 2011) Standard Test Method for Calculated Cetane Index of Distillate Fuels 1This standard is issued under the fixed designation D976; the number immediately...
  • 3
  • 1,574
  • 3
ASTM D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

ASTM D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

... Designation: D1319 − 13 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption 1This standard is issued under the fixed designation D1319; the ... Documents2.1 ASTM Standards:2D86 Test Method for Distillation of Petroleum Products atAtmospheric PressureD1655 Specification for Aviation Turbine FuelsD2710 Test Method for Bromine Index of Petroleum ... probability):7Supporting data regarding the precision obtained from a round robin test for oxygenate containing samples in Table 3 have been filed at ASTM InternationalHeadquarters and may be obtained by requesting...
  • 7
  • 1,903
  • 2
ASTM D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

ASTM D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

... Designation: D2887 − 13Designation: 406 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography 1,2This standard is issued under the fixed designation D2887; ... D2887 for deter-mining the boiling range distribution of petroleum fractions by gas chromatography has no bias because the boiling range distribution can only be defined in terms of a test method. 14.2.1 ... Distillation of Petroleum Products atReduced PressureD2892 Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)D3710 Test Method for Boiling Range Distribution of Gaso-line...
  • 24
  • 892
  • 3
ASTM D4539  10  Standard Test Method for Filterability of Diesel Fuels by LowTemperature Flow Test (LTFT)

ASTM D4539 10 Standard Test Method for Filterability of Diesel Fuels by LowTemperature Flow Test (LTFT)

... Designation: D4539 10 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) 1This standard is issued under the fixed designation D4539; the number ... Point of Petroleum ProductsD975 Specification for Diesel Fuel OilsD1655 Specification for Aviation Turbine Fuels D2500 Test Method for Cloud Point of Petroleum ProductsD3117 Test Method for Wax ... referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards volume information, refer to the standard s...
  • 6
  • 640
  • 2
ASTM D6079  11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the HighFrequency Reciprocating Rig (HFRR)

ASTM D6079 11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the HighFrequency Reciprocating Rig (HFRR)

... Designation: D6079 11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) 1This standard is issued under the fixed designation D6079; the number ... since the last revision or reapproval.1. Scope*1.1 This test method covers the evaluation of the lubricity of diesel fuels using a high-frequency reciprocating rig (HFRR). 1.2 This test method ... Practice for Aviation Fuel Sample Containers for Tests Affected by Trace ContaminationD6078 Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity...
  • 8
  • 1,134
  • 2
ASTM D6371  05 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

ASTM D6371 05 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

... Designation: D6371 05 (Reapproved 2010) Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels 1This standard is issued under the fixed designation D6371; the number ... 2 005 as D6371 05. DOI:10.1520 /D6371- 05R10.2 For referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards ... 116 Diesel and domestic heating fuels - Determination of cold filter plugging point 3. Terminology3.1 Definitions of Terms Specific to This Standard: 1This test method is under the jurisdiction of...
  • 8
  • 746
  • 2
provisional standard test method for water-soluble chloride available for corrosion of embedded steel in mortar a

provisional standard test method for water-soluble chloride available for corrosion of embedded steel in mortar a

... TEST METHOD FOR WATER-SOLUBLE CHLORIDE 222.1-1ACI 222.1-96 Provisional Standard Test Method for Water-Soluble Chloride Available for Corrosion of Embedded Steel in Mortar and Concrete Using ... determination of water-soluble chloride in a cementsystem.* However, some aggregates contain a considerableamount of chloride that is bound in the aggregate and is not available for the corrosion ... STANDARD 1—Scope1.1—This test method provides procedures for the sam-pling and analysis of hydraulic-cement mortar, concrete, oraggregate for chloride that is water-soluble and available for the corrosion reaction...
  • 3
  • 344
  • 0

Xem thêm

Từ khóa: an exact method for the stability analysis of timedelayed lineartest bank for systems analysis and design 9th edition by shellyan exact method for the stability analysis of linear consensus protocols with time delayan exact method for the stability analysis of time delayed linear time invariant lti systemsa method for word sense disambiguation of unrestricted text425 single stuck at fault test vectors for the minimal sum of products realization of thea method for classifying the quality of golf green turf1—nondestructive test methods for determining material properties of hardened concrete inan algorithm for finding the distribution of maximum entropyoverview of methodologies for the capital treatment of transactions secured by financial collateral under the standardised and irb approachesstrategy for distribution of improved seed by research centre for forest tree improvement rcfti vietnam april 2007in which rtt the reliability coefficient using this method r1 2 the correlation of the scores at time one with those at time two for the same test used with the same person1—film properties of polymethacrylates and polyacrylates using test method astm d 412 lavelle 1988method for determination of resistancesample test question for csetNghiên cứu sự hình thành lớp bảo vệ và khả năng chống ăn mòn của thép bền thời tiết trong điều kiện khí hậu nhiệt đới việt namNghiên cứu tổ chức pha chế, đánh giá chất lượng thuốc tiêm truyền trong điều kiện dã ngoạiNghiên cứu tổ hợp chất chỉ điểm sinh học vWF, VCAM 1, MCP 1, d dimer trong chẩn đoán và tiên lượng nhồi máu não cấpNghiên cứu tổ chức chạy tàu hàng cố định theo thời gian trên đường sắt việt namBiện pháp quản lý hoạt động dạy hát xoan trong trường trung học cơ sở huyện lâm thao, phú thọGiáo án Sinh học 11 bài 13: Thực hành phát hiện diệp lục và carôtenôitPhát triển mạng lưới kinh doanh nước sạch tại công ty TNHH một thành viên kinh doanh nước sạch quảng ninhĐịnh tội danh từ thực tiễn huyện Cần Giuộc, tỉnh Long An (Luận văn thạc sĩ)Thơ nôm tứ tuyệt trào phúng hồ xuân hươngThiết kế và chế tạo mô hình biến tần (inverter) cho máy điều hòa không khíSở hữu ruộng đất và kinh tế nông nghiệp châu ôn (lạng sơn) nửa đầu thế kỷ XIXQuản lý nợ xấu tại Agribank chi nhánh huyện Phù Yên, tỉnh Sơn La (Luận văn thạc sĩ)BT Tieng anh 6 UNIT 2Tăng trưởng tín dụng hộ sản xuất nông nghiệp tại Ngân hàng Nông nghiệp và Phát triển nông thôn Việt Nam chi nhánh tỉnh Bắc Giang (Luận văn thạc sĩ)Tranh tụng tại phiên tòa hình sự sơ thẩm theo pháp luật tố tụng hình sự Việt Nam từ thực tiễn xét xử của các Tòa án quân sự Quân khu (Luận văn thạc sĩ)Giáo án Sinh học 11 bài 14: Thực hành phát hiện hô hấp ở thực vậtChiến lược marketing tại ngân hàng Agribank chi nhánh Sài Gòn từ 2013-2015Đổi mới quản lý tài chính trong hoạt động khoa học xã hội trường hợp viện hàn lâm khoa học xã hội việt namHIỆU QUẢ CỦA MÔ HÌNH XỬ LÝ BÙN HOẠT TÍNH BẰNG KIỀMTÁI CHẾ NHỰA VÀ QUẢN LÝ CHẤT THẢI Ở HOA KỲ