... controllers (PC) , etc.]
PC Connection, Operation Manual V042-E1-
This Operation manual describes how to connect the programmable terminal
(PT) to programmable controllers (PC) and other equipment, ... these connections.
[For information on NT series PT functions, operations, and restrictions]
NT31/31C Programmable Terminal Operation Manual V043-E1-
NT631/63...
... computer
.
(refer
to the manual for
the NT Support T
ool)
Create the screens.
(Refer
to the
NT31/NT31C/NT631/NT631C
Programmable T
erminal Reference Manual
and the
NT Support T
ool Operation
Manual. )
*1: ... between the RS-422A
terminal signal lines and FG terminal (with a
500 VDC megger)
Dielectric strength 1,500 VAC for 1 minute between the RS-422A
terminal signal lines...
... the other PCs are transferred in as
read words so that each PC can access the data written by the other PCs in the
PC
Link System. Only the write
words allocated to the particular PC will be ... operating a PC and ex
-
plains basic terminology used with OMRON PCs. Descriptions of Peripheral Devices used with the
C200H
PCs and a table of other manuals available to use with this manu...
... - 6 A - 6
About Manuals
The following manuals are also related to this product.
In necessary, order them by quoting the details in the tables below.
Related Manuals
Manual Name
Manual Number
(Model ... modified.
Write, insert, delete
SFC diagram modifying operation
Conversion operation
Block information
Step-by-step operation output/
transition condition correcting
operation
2)
3...
...
differences.
top
See Related Products:
Programmable Terminal
NP Series
Easy setup with the cost-effective, compact NP
Series.
NT11 Programmable Terminal
* Ordering
information ... applications of the
keys: the sheet can be taken out from the
side face of the terminal.
The front panel of the terminal has a water-
withstanding
construction.
Exampl...
... Products:
Programmable Controller
CP1L
Complete with a standard-feature USB port, for
applications with as few as 10 points, to 60 points.
NP Series Programmable Terminal
... including operating efficiency,
by enabling connection of various
control devices, easy design work,
and the smoothest possible
connections.
NP Series Lineup
Operation Features
Tran...
... Failure to abide by the following precautions could lead to faulty operation of the
PC or the system, or could damage the PC or PC Units. Always heed these pre-
cautions.
• Fail-safe measures must ... contained in this publication.
C200H-PID0j
PID Control Unit
Operation Manual
Revised March 2000
16
Remote I/O Terminal The Remote I/O Terminal in the table below is recommended f...
... the " ;PC systems" button in the working area. Go to " ;PC systems PC
general" and select the " ;PC station" item.
Click the "OK" button to add a PC station ... Downloading the PC Station Configuration 28
7 OPC Scout V10 34
http://eyeteck.vn
3 PC Station Configuration
S7 communication between PC station and S7-1200
V1.1, Item ID:...