Phoenix R/C Professional Model Flight Simulation User Manual Version 3 0 phần 5 doc

... The user willbeinformedthattheyhavebeenkickedfromyoursession,andwillnotbeabletojoinagainforatleast 30 seconds.• Ban User ‐Available if you arethehost only, this button will permanently bantheselected user from thesession.The user willbeinformedthattheyhavebeenbannedfromthesession,andwillnotbeabletojoinyoursessionagain.• ... crash. With thisdisabled,modelswillnotimpactinanonlinesession.• Kick high‐lag users – With this option enabled, if Phoenix detects a  user has too high a ping, ... beautomaticallyejectedfromthesessiontopreservethesessionsmoothness.• Allowedmodels–Thisdrop‐downboxletsyouselectthetypeofmodelsthatareallowedinthesession.Thedefault“AllModels”optionallowsany model tobeflowninthesession.Selectingoneoftheotheroptionsonlyallowsthattypeof model tobeflowninthesession.Onceyouhavesetalloftheoptionsthatyouwishforyournewsession,clickthecreatebuttontostartthesession.ClickthecancelbuttontoreturntotheOnlineLobby.FlyinginanonlinesessionOnce...

... aroundthedefaultof 50 % value. Simulation SpeedThisslidercontrolsthetotalspeedofthe simulation. Thedefault( 100 %)valueisthenormalspeedofthe simulation, whereallmodelsaremovingatrealisticvelocities.Reducingthissliderbelow 100 %willcausethe simulation toappearinslow‐motion,makingiteasierto ... After 3 seconds(Default)–Whenanyimpactordamageoccurs,resetthe model afterwaiting 3 seconds• After 10 seconds–Whenanyimpactordamageoccurs,resetthe model afterwaiting 10 secondsControl–thisisthenameofthe model controlorfunction,suchas“Elevator”or“RetractGear”.Min–Setstheminimumtravelofthiscontrol.Byincreasingthis,thecontrolwillnotmovetothefullextent.Status–Thisshowsthecurrentstateofthiscontrolcomingfromyourradio(ifconnected).Max‐Sets ... panealongwithinformationaboutit.ColourschemesBelowthe model selectionlistyouwillfindanotherdrop‐downbox.Manymodelsin Phoenix featuremorethanonecolour‐scheme,andwhenthisisthecaseyouwillbeabletoselecttheminthisbox.VariantsWhenyouedita model, Phoenix createsa“Variant”ofitwhichissavedsoyoucanselectitlater.VariantsarestoredinyourMyDocuments/PhoenixRC/Variantsfolder,andcanbesharedwithother Phoenix users.Manymodelsalsofeaturepresetor“system”variantswhichreflectcommon model setups.Ifa model hasapresetvariantpresent,orhas...

... Aftertake‐off–Thefailurewilloccurshortlyafteryour model leavestheground.• After 10 s–Thefailurewilloccurapprox. 10 secondsafteryour model leavestheground.• After 30 s–Thefailurewilloccurapprox. 30 secondsafteryour model leavestheground.• ... 10m x 10m 6‐flag layout,  andplacesthe model inthecentre,facingawayfromyou.• F3CArea–Enablesthe“F3CArea”layout,whichrecreatesthestandardF3C flight linewithtwo5m‐dis ... wizardletsyouquicklyandeasilyapplylargechangestoa model withoutneedingtoadjustmanyattributes.ThefirststageoftheScalewizardisthemainscalingstep.Hereyouwillseearepresentationoftheselected model, alongwithsomebasicspecificationstothetop‐leftofthepreviewpane.Atthebottomofthemenuisthescalingslider.Movingthisslidertotheleft(below 100 %)willcausethe model toshrink a  proportionate amount, while moving  it to the right (above 100 %) will cause the model to grow larger aproportionateamount.Settingthesliderbackto 100 %willleavethe model atthenormalsize.As...