... magnetic field (A and
B) and (E and F), both conductors exhibit exclusion of an applied magnetic field (C and D) and (G and H). (b) When cooled in the presence
of a magnetic field (I) and (L), the ...
Aluminum alloys
Sand or permanent cast
alloys
Mold cast alloys
40-145 HB
A356, A390 Si, Cu, Mg No No No Yes
Die cast alloys 65 -125 HB
A360, 380, 390 Si, Cu, Z...
... compositions, properties, and applications of dental alloys can be found in Ref 9 and 10, and in the
article "Tarnish and Corrosion of Dental Alloys& quot; in Corrosion, Volume 13 of ASM Handbook, ... strong and is used for spring-type
electrical contacts.
Mechanical Properties
Tensile properties. See Fig. 2 and 3.
Fig. 2 Tensile properties and electrical c...
... in Handbook on the Physics and Chemistry of the
Actinides, Vol 4, A.J. Freeman and C. Keller, Ed., Elsevier, 1986, p 309- 412
587.
P.D. Kleinschmidt and J.W. Ward, J. Less-Common Met., Vol 121 , ...
multilined spectrum of incandescent scandium vapor. Turning of scandium can be ignited and will burn white hot. Finely
divided scandium should not be handled in air. Ingots of pu...
... melting, molten metal handling, dross handling and disposition, and welding of alloys. Standard define the
maximum beryllium in welding rod and weld base metal as 0.008 and 0.010%, respectively. ...
242.0
T61 S or P 515 960 4 -12
(j)
205-230 400-450 3-5
T4 S 515 960 12 . . . . . . . . .
T6 S 515 960 12 155 310 3-6
T62 S 515 960 12 155 310 12- 24
295.0
T7 S 515 960 1...
... brazed, and many
coppers and copper alloys can be welded by various gas, arc, and resistance methods. For decorative parts, standard alloys
having specific colors are readily available. Copper alloys ... power tools, appliances, and structural
parts. Due to their mechanical and physical properties, aluminum
P/M alloys provide engineers with flexibility in material sele...
... heading and
upsetting, hot forging and pressing, piercing and
punching, roll threading and knurling, shearing,
spinning, squeezing, and stamping
Weldability. Joining by soldering, brazing, and ...
connectors, clips, and other current-carrying parts
requiring strength and exceptional softening resistance.
Applications requiring excellent hot and cold
workability, high...
... permanent
mold, and sand castings for hardware fittings; valves and
valve trim; statuary, and ornamental castings
Mechanical Properties
Tensile properties. Typical data for sand-cast test
bars: ... continuous, and sand
castings for valves, pump bodies, flanges, and elbows
for applications requiring resistance to seawater
corrosion
Mechanical Properties
Tensile proper...
...
mechanical properties and high elongation. Used in the
solution-heat-treated and artificially aged (T6) condition
Mechanical Properties
Tensile properties. See Table 18.
Table 18 Typical and minimum ... strength. 125 MPa (18 ksi)
Compressive yield strength. 130 MPa (19 ksi)
Tensile and compressive properties versus
temperature. See Table 11 and Fig. 5.
Table 11 Typi...
... Corrosion, Volume 13 of ASM Handbook, formerly 9th Edition Metals Handbook.
Energy Production and Storage. Titanium plate-type heat exchangers, condensers, and piping and tubing are
common in ... tungsten-base alloys usually divide them into four classes based on
composition (Table 23) and three types based on tensile properties (Table 24). Tables 25 and 26 give typical mec...