... distinct areas:
• Flaw detection and evaluation
• Leak detection and evaluation
• Metrology (measurement of dimension) and evaluation
• Location determination and evaluation
• Structure or microstructure ... Creep-
Fatigue Damage in Pressure
Parts of Long-Term Service-Exposed Thermal Power Plants, in
Residual Life Assessment Nondestructive
Examination and Nuclear H...
... Bearings," AMMRL CTR 7 7-1 3, Final Report, Contract Nos. DAAG4 6-7 4-C-
0012 and
DAAG4 6-7 5-C-0001, U.S. Army Materials and Mechanics Research Center, March 1977
44. J.R. Barton and J. Lankford, "Magnetic ...
Bearings," AMMRL CTR 7 7-1 3, Final Report, Contract Nos. DAAG4 6-7 4-C-0012 and DAAG4 6-7 5-C-
0001, U.S. Army Materials and Mechanics Research...
... the
medium bands; and plastics and composite materials such as filament-wound glass, Kevlar, and honeycomb in the higher
bands.
References cited in this section
17.
M.W. Standart, A.D. ... incident and reflected waves interfere and cause a standing
wave. The standing wave wavelength and peak amplitude change along the standing wave pattern and are related to the
veloc...
... for
Nondestructive Testing, 1986
2. H.E. Bussey, Standards and Measurements of Microwave Surface Impedance, Skin Depth
, Conductivity,
and Q, IRE Trans. Instrum., Vol 1-9 , Sept 1960, p 171 -1 75 ... testpiece. A C-scan format also records time-of-flight data, whi
ch can be converted and
displayed by image-processing equipment to provide an indication of flaw depth
A-scan and...
... needed depends on radiation
quality; for example, 3 mm ( in.) of lead for 250-kV x-rays and 6 mm ( in.) of lead for 1-MeV x-rays or for Ir-192 or
Co-60 -rays. At 100 kV and lower, the lead that ... rack -and-
tank method. (a)
Processing tanks containing developer, stop bath, and fixer. (b) Cascade (countercurrent) washing tank
Handling of Film. The processing room and all equipme...