... the material cross section Manufacture 6.1 The finished part shall be manufactured from a forging that is as close as practicable to the finished size or shape Alternative starting materials may ... Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS Available from the Manufacturers Standardization Society of the Valve and Fittings Industry (MSS), 127 Park Street, NW., Vienna, VA 22180 A 961 ... Isothermal Annealing—Isothermal annealing shall consist of austenitizing a ferrous alloy, and then, cooling to and holding within the range of temperature at which the austenite transforms to a relatively...
... hỗn hợp nh a ch a đóng rắn, g/cm3 ρc : Khối lượng riêng mẫu nh a sau đóng rắn (mẫu đúc), g/cm3 15 Kết khảo sát PHỤ LỤC PHƯƠNG PHÁP ĐO KHỐI LƯỢNG RIÊNG VÀ TỶ TRỌNG C A NH A - TIÊUCHUẨNASTM D – ... độ t a cao phản ứng đóng rắn 19 Kết khảo sát PHỤ LỤC XÁC ĐỊNH TÍNH CHẤT CHỊU UỐN – TIÊUCHUẨNASTM D – 790 -o0o Phượng pháp cho phép xác định tính chất uốn vật liệu nh a gia cường không gia cường, ... TÍNH CHẤT CHỊU KÉO – TIÊUCHUẨNASTM D – 638 -o0o Phương pháp cho phép xác định tính chất kéo vật liệu nh a gia cường không gia cường, bao gồm vật liệu composite có Mođul cao điều kiện nhiệt độ,...
... tổng ASTM D 5453 0,05 max % khối lượng Độ ăn mòn đồng ASTM D 130 No max Chỉ số cetane ASTM D 613 47 Điểm đục ASTM D 2500 Cặn Carbon ASTM D 4530 0,05 max % khối lượng Chỉ số acid ASTM D 664 0,8 max ... MỘT SỐ CHỈ TIÊU QUAN TRỌNG TRONG TIÊUCHUẨNASTM D6751 VÀ ASTM D975 2.1 Các phương pháp xác định tiêuchuẩnASTM D6751 (Biodiesel) Các phương pháp xác định tiêuchuẩnASTM D 6751 mang tính chất ... tiêuchuẩnASTM D6751 Phương pháp thử Giới hạn Đơn vị ASTM D 93 130 0C Nước cặn ASTM D 2709 0,05 max % thể tích Độ nhớt động học 400C ASTM D 445 1,9 – 6,0 mm2/s Tro Sulfat ASTM D 874 0,020 max...
... liệu Chỉ tiêu Phương pháp Giới hạn Đơn vị Cặn sunfat ASTM D 874 0,020 max % khối lượng ASTM D 5453 0,05 max % khối lượng Cặn cacbon ASTM D 4530 0,05 max % khối lượng Nhiệt độ cất D1160 360 max oC ... (ASTM D 874) Lưu huỳnh % khối lượng < 0,05 (< 500) ASTMD 5453/ TCVN 6701 (ppm) Ăn mòn đồng Trị số xêtan 10 Điểm vẩn đục Loại (ASTM D 2622) TCVN 2694 (ASTM D 130) > 47 oC No1 TCVN7630:2008 (ASTM ... xác định tiêuchuẩnASTM D975 (Diesel) Nhóm đặc trưng cho tính chất nhiên liệu Cặn sunfat Cặn cacbon Hàm lượng lưu huỳnh Nhiệt chưng cất 42 2.1.2 CÁC PHƯƠNG PHÁP XÁC ĐỊNH TRONG TIÊUCHUẨNASTM D975...
... tra bền nhân tố trạng thái ứng suất đơn : Mx max * y max Jx Mx h = max * Jx σ z max = Với Jx = b * h3 12 [12,(6-34),111] [12,(6-1 7a) ,105] Thay vào ta : σ z max = Theo điều kiện bền : σ z max ... trạng thái oxy h a trung gian (+4) nên SO2 tham gia phản ứng theo nhiều kiểu khác nhau: - Cộng khơng thay đổi số ơxy h a : SO2 + H2O = H2SO3 -Thực phản ứng khử : SVTH : Nguyễn Duy Ngh a ĐỒ ÁN MƠN ... hấp thụ sở Natri : Ưu điểm : phương pháp ứng dụng chất hấp thụ h a học khơng bay, có khả hấp thụ lớn + Phương pháp Amoniac : SO2 hấp thụ dung dịch Amoniac dung dịch Sunfit-biSunfit amơn Ưu điểm...
... investigated Base on the measurement of standard samples by using fundamental parameter mode in Win Axil software, the concentration of Th, Ca, Fe, V, Mo in samples was calculated accurately The radioactive ... were investigated The sample after stored for a month to attain equilibrium was measured by Gamma spectrometry DIGIDART-10 and calculated by Gamma vision software Besides, we have carried out experiments ... Quality Assurance/Quality Control) ASTM Hiệp hội thử nghiệm vật liệu Mỹ ( American Society Test Material) SD Độ lệch chuẩn ( Standard Deviation) RSD Độ lệch chuẩn tơng đối (Relative Standard Deviation)...
... ngh a rộng, nhóm thứ hai theo đònh ngh a hẹp Các đònh ngh a đất ngập nước theo ngh a rộng đònh ngh a công ước Ramsar, đònh ngh a theo chương trình điều tra đất ngập nước Mỹ, Canada, New Zealand ... nhiệt độ (Mara Silva, 1979), pH (Parhad Rao, 1974; Him nnk, 1980; Pearson nnk, 1987), xạ mặt trời (Moeller Calkins, 1980; Polprasert nnk,1983; Sarikaya Saatci, 1987) Các yếu tố sinh học bao gồm : ... chế chủ yếu sau: + Nitrat hoá/khử nitơ + Sự bay amoniăc (NH3) + Sự hấp thụ thực vật Hiện nhà nghiên cứu ch a thống tầm quan trọng chế khử nitơ đặc biệt với hai chế nitrat hoá/khử nitrat hấp thụ...
... tiêuchuẩn EN14538 (Fat and Oil derivatives – Fatty acid methyl esters (FAME) – Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma ... 975 tiêuchuẩnASTM D6751 2.1 TiêuchuẩnASTM D 975 14 TiêuchuẩnASTM D 975 - Standard Specification for Diesel Fuel Oils tiêuchuẩn qui định cho diesel khoáng Đặc điểm kỹ thuật bao gồm bảy ... số tiêu kĩ thuật quan trọng diesel N0.2D tiêuchuẩnASTM D975 với biodiesel tiêuchuẩnASTM D6751” đạt kết sau: Tìm hiểu thông tin diesel N0.2D biodiesel Tìm hiểu sơ lược tiêuchuẩnASTM D975 ASTM...
... Túi may đáp, diễu hai đường song song cách 5,6cm Đô áo Xếp plis 1cm qui cách may theo áo mẫu Sườn vai May lộn Tay áo Tra tay lộn, machette tra lộn Sườn áo May lộn Cổ áo Lá cổ, chân cổ hai lớp ... cách may sản phẩm chemise nên bổ sung thêm phần kí hiệu thiết bị may, ví dụ minh h a sau: Ứng dụng tiêuchuẩnASTM D6193 Hình Kết cấu đường may áo chemise nam (có thể ký hiệu thiết bị may) Như ... ứng dụng: Hình Loại mũi may sử dụng - Thiết bị sử dụng: Hình Thiết bị sử dụng cho đường may lai - Qui tắc đan mũi may Ứng dụng tiêuchuẩnASTM D6193 Hình Quy tắc đan mũi may ...
... pipe grade (ASTM plate specification designation and plate grade, when applicable) 16.2 Certification—Upon request of the purchaser in the contract or order, a manufacturer’s certification that the ... order, a manufacturer’s certification that the material was manufactured and tested in accordance with this specification, including year date, together with a report of the chemical and tensile ... shall afford the inspector all reasonable facilities to satisfy him that the material is being furnished in accordance with this specification All tests and inspection shall be made at the place...
... BITUMEN—AGGREGATE APPLICATIONS Relating in General to the Application of Bituminous Material on Prepared Aggregate or Pavement Surfaces which are Covered with Mineral Aggregate penetration macadam, ... n a pavement layer containing essentially one-size coarse aggregate, penetrated in place by a heavy application of bituminous material, followed by an application of a smaller size coarse aggregate, ... aggregate, and compacted Multiple layers containing still smaller coarse aggregate may be used surface treatment, n—an application of bituminous material followed by a layer of mineral aggregate...
... bearing plates and then adjust the spherical seats so that the specimen is loaded uniformly and axially 17.3 Speed of Testing— For measuring load-deformation data, apply the load at a constant ... the load may be applied at a constant rate of grip motion so that maximum load is achieved in about 10 but not less than nor more than 20 33.4 Load-Elongation Curves—If load-elongation data have ... securely clamp the specimen with either bolts or wedge-shaped jaws If the latter are employed, apply a small preload to ensure that all jaws move an equal amount and maintain axial-alignment of...
... grease will be worked as little as possible Jar the cup to drive out trapped air and pack the grease with the spatula, with as little manipulation as possible, to obtain a cupful without air ... a grease cup, cover, and plunger assembly, in accordance with A1 .4, constructed for either manual or mechanical operation 6.3.1 Grease Worker Drive, Manual, in accordance with A1 .5, which allows ... prepared faces upward, and a prepared face against the base plate or guide of the cutter Bring the temperature of the prepared specimen to 25 0.5°C (77 1°F) by placing it in a temperature bath maintained...
... accurate results are desired, analytical test methods shall be chosen so that sulfate and sulfide can be reported separately 4.2 Apparatus and Materials: 4.2.1 Balance—The analytical balance used in ... for analysis of hydraulic cement, each test method (see 3.3.1) must be qualified individually for such analysis Qualification data, or if applicable, requalification data, shall be made available ... by the American Chemical Society, see Analar Standards for Laboratory Chemicals, BDH Ltd., Poole, Dorset, U.K., and the United States Pharmacopeia and National Formulary, U.S Pharmacopeia Convention,...
... Flow Table and Accessory Apparatus (Partial) (In./Lb) values obtained with a suitable calibration material.2,3 pedestal shall be obtained at all points No nuts or other such leveling devices shall ... National Institute of Standards and Technology, Gaithersburg, MD 20899 Supporting Data are available from ASTM Headquarters Request RR: C01–1006 C 230/C 230M FIG Flow Table and Accessory Apparatus ... pedestal The pedestal shall be cast inverted on the base plate A positive contact between the base plate and the Such a material can be obtained from the Cement and Concrete Reference Laboratory at...
... tiêu thụ oxi (hay tốc độ oxi h a) cao, có gấp lần giai đoạn thứ hai - Giai đoạn thứ ba: sau thời gian dài tốc độ oxi h a cầm chừng (hầu thay đổi) có chiều hướng giảm, lại thấy tốc độ tiêu thụ oxi ... NƯỚC THẢI BỆNH VIỆN ĐÃ ĐƯỢC ÁP DỤNG 3.1 Ao hồ sinh học (ao hồ ổn định nước thải-Waste Water Stabilization ponds and lagoons) Cơ sở khoa học phương pháp d a vào khả tự làm nước, chủ yếu vi sinh ... metan cần làm giảm thể tích Quá trình oxi h a chất bẩn hữu xảy aeroten qua ba giai đoạn: - Giai đoạn thứ nhất: tốc độ oxi h a tốc độ tiêu thụ oxi Ở giai đoạn bùn hoạt tính hình thành phát triển...
... X et Y coordonnees des points en cm R=rayon de la charge en cm P=pression de contact en bars T=cisaillement horizontal en bars Vi du so sanh ket qua TABLEAU : DEFLEXIONS ********************************* ... X et Y coordonnees des points en cm R=rayon de la charge en cm P=pression de contact en bars T=cisaillement horizontal en bars Vi du so sanh ket qua TABLEAU : DEFLEXIONS ********************************* ... thuyết a0 , b0 Việc chọn hệ số a, b thay cho a0 , b0 ch a biết d a phương pháp bình phương bé ; a, b chọn để ước lượng cho a0 , b0 a, b làm cực tiểu hố tổng sau : Q (A , B) = n ∑ ( yi − A. xi − B...