... On the other hand, it has been shown [23] that spatially compact currents produce highly localized fields Therefore, the sparsity of the matrix is the direct result of thelocal nature of the ... to the nature of the integral kernel The reason is, in scattering problems, the element Zi j of the MoM impedance matrix represent the represents the “radiator/receiver” relationship between the ... below The radius of the patch is 6.70 cm The height of the patch is 0.15875 cm (62.5 mils) and εr = 2.62 The source is offset 5.03 cm from the center, and the probe radius was taken as 0.05 cm The...
... glass electrode method, ORP, BOD and suspended solids (SS) by Standard Method for the Examination of Water and Wastewater (1995), COD by potassium dichromate method, NH4-N by Nessler method, NO2-N ... water changed in the range around 0.1 to 0.4 for all the MSL systems, except for in July 2000 For the other parameters, COD ORP and SS in both river and treated water followed the pattern of BOD ... the surface of zeolite With regards to the removal rate of the pollutants in Table 2, the differences among the MSL systems were small considering with the difference of hydraulic loading rates...
... is the number of occurrences of the word wi in the document dj; – dfi is the number of documents in the corpus where the word wi occurs; – N is the total number of documents in the corpus The ... for the sets which include scores for the MT systems The scores at the top of each cell show the results for the first run of the experiment, which used the “Reference” human translation; the ... the basis of the human reference corpus, all counts for the N-grams containing this word are increased by the value of the respective score (not just by 1, as in the baseline BLEU approach) The...
... 5d, the maximum electric field forms around the edge of the tip and the surface, and therefore the distance between the maximum fields increases as the penetration depth increases Note that the ... created between the native oxide layer and the substrate, which caused the oxyanions (OH-) to drift through the oxide film [3-6] During the AFM local oxidation in contact mode, the tip applied ... in the range of to 15 V and the tip loading force was modulated from approximately 60 nN to approximately 180 nN The scan speed was fixed to 6.028 μm/s, during the process During the AFM local...
... because of the non -local nature of the fractional derivatives In addition to that, to the best of the author’s knowledge, fractional derivatives are introduced here for such problems for the first ... be viewed as an extension of the work in [6] to the fractional order case Indeed, the work in [6] is concerned with the first-order derivatives whereas here we treat the fractional order case where ... differential equations) is the class of neutral differential equations In this type of problems the delayed argument occurs in the derivative of the state variable This is the case, for instance,...
... Another big difference in the 802.11p compared to the original 802.11 is that there is no difference between the nodes in the network, that is, all nodes are peers including the roadside units There ... m/s The different speeds are chosen with the speed regulations of Sweden in mind The vehicles will have the same speed as long as they are staying on the highway and the vehicles not overtake The ... is the MAC method In this paper, we are investigating the ability of a sending node to get access to the channel within a finite upper bound Therefore, we define the MAC channel access delay as the...
... subregions with the spatially invariant PSFs However, rather than deblurring the individual subregions locally and then sewing the individual results together, this method interpolates the individual ... solution of the time-dependent diffusion equation for the instantaneous point source with the use of the FEM methodThe time-gating delays of the receivers were chosen so that the lengths of the outer ... 1.4 cm The result obtained with the spatially variant model is given on the left of Figure The right image represents the restoration with the use of the invariant PSF The crosses in the figure...
... spreading into the core section During basic design, the selection of the frame system parallels the arrangement of the core Fig shows frame deformation after the loss of three columns on the 1st floor ... [3] In the analysis, the vertical load is applied so that the axial force ratio becomes 0.35 As shown in the figure, in cases with the functional loss of three columns (except for themoment ... protection) for the key elements that enhance redundancy in the sections where they are located The detail design stage includes the design of beam-column connections, the design of floor systems, the design...
... rather walk the inevitable horizontal edge straight away Then we insert the new LR pairs as prescribed by the fourth component of the Follower Now we number the resulting new intervals (of the ... interfaces, then another, then yet another, and so on So every word in the alphabet whose letters are all the 511 non-empty subsets of the set of nine interfaces {0, −1, 1}2 , introduces yet another ... as long as the total number does not exceed the maximal allowed number, r Of course, these new pairs behave like the ones at the very beginning, they come in adjacent LR pairs Also they may only...
... and the SCN methodThe table summarizes the comparison between the average of IISH and the SCN method In this table, the averages of IISH were generated from the range of 1.4 × 1.4 µm based on the ... http://www.jnanobiotechnology.com/content/5/1/7 Figure The results of the SCN method and ISH The results of the SCN method and ISH (a-c) Each square indicates the region of the AFM probe insertion Numbers in lower ... darkness of each point on the cell according to the average of the back- Figure Experimental overview of the SCN method and ISH Experimental overview of the SCN method and ISH The AFM probe was inserted...
... perspective [11] Therefore, we explored in this study whether the QIC method was applied to complex process redesign projects in a process redesign collaborative in the Netherlands Methods The collaborative ... describe the collaborative process and to assess the applicability of the QIC method to process redesign Additional information about the preconditions was gathered to evaluate whether they could ... using the QIC method Non-optimal fit between the QIC method and process redesign First, a lot of the project teams needed customised solutions for their process redesign, while the QIC method...
... were unable to determine the kappa value of feature There were disagreements about the feature in 22 out of 96 cases (23%) between two nurses The kappa values of the other features were 0.91, ... nurse and the psychiatric expert The sensitivities of the two nurses’ evaluations using the Korean CAM-ICU compared with the reference standard were 89.80% for nurse and 77.40% for nurse Their specificities ... during the introductory period We hope that the Korean CAM-ICU will help clinicians detect delirium in the ICU and eventually improve the outcome of patients in the ICU through reducing the incidence...
... perspective [11] Therefore, we explored in this study whether the QIC method was applied to complex process redesign projects in a process redesign collaborative in the Netherlands Methods The collaborative ... describe the collaborative process and to assess the applicability of the QIC method to process redesign Additional information about the preconditions was gathered to evaluate whether they could ... using the QIC method Non-optimal fit between the QIC method and process redesign First, a lot of the project teams needed customised solutions for their process redesign, while the QIC method...
... mean that the physiological status of the patient has changed The error of the measuring technique is directly related to the magnitude of the least significant change (LSC) The LSC is the minimum ... is the precision of the studied technique as measured by the worked example, and PE is the percentage error for the Bland-Altman plot for the reference technique minus the studied technique The ... above), it is then possible to calculate the CV of the tested device, which in this case is 15% It is then obvious that, although the combined PE is almost adequate, the precision of the new technique...
... rates, the metabolite concentrations rather than the enzyme reaction rates themselves were used The second term in the fitness function evaluates the ratio of static enzymes included in the metabolic ... for the E coli model and 60 s for the S cerevisiae model; these settings were chosen to allow time for the change from the original steady state to another steady state after the perturbation The ... rates themselves, the reproduced metabolite concentrations were employed for the evaluation, as explained in the Methods Therefore, the accuracy of the estimated reaction rates of the internal enzymes...
... know how far the trend will carry the position and by trailing the stop, you have the chance to further maximize your gains The 5-Day Momentum Method Page 32 CHART: The 5-Day Momentum Method Page ... in -the- money to minimize the option premium In the above example, we used 57 3/4 as the trigger price Therefore the 55 calls are one strike in the money and the 50 calls The 5-Day Momentum Method ... further The 5-Day Momentum Method Page 24 The Day Exit Research on The Day Momentum Method has found that the average period to maximize gains after being tilled is five trading days (hence, the...
... towards the basilica vein The lymphatic vessels draining the antero – lateral aspect of the arm drain across the upper part of the arm and into the apical lymph nodes in the axilla The lymph from the ... Ducts There are two main ducts in the body; the right lymphatic duct and the thoracic duct The right lymphatic duct transports lymph from the right side of the head and neck, the right arm, the ... further aim was to investigate whether themethod was sensitive to change in hand size over time and whether it was as sensitive as the clinically used circumferential method 1.3 Contents of thesis...
... assigned as the control group and the other as the experimental group The experimental group received the translation method as the treatment; and the control group received the non-translation method ... inspired her to conduct the study as well as the research questions The author also presented the scope of the study that the thesis‟s focus was the application of Translation Method in vocabulary ... analysis The study consisted of chapters which covered the introduction of the research, the literature review, the methodology, the data analysis and discussion and the conclusion chapter There...
... hoạt hoá tinh trùng v TTON, theo dõi phát triển phôi Thí nghiệm đợc tiến h nh phòng thí nghiệm Viện Chăn Nuôi Đánh giá phân loại phôi Phân loại phôi theo chất lợng v theo giai đoạn phát triển Báo ... (Vitrification method) để nâng cao tỷ lệ phôi sống sau giải đông Tài liệu tham khảo Saito,N., K.Imai,M.Tomizawa Effect of sugar-addition on the survival of vitrified bovine blastocysts produced in vitro Theriogenology, ... vitro Theriogenology, 41,1053-1060,1994 Saito,N., K.Imai The effect of addition of various monosacchorides to vitrification solutions on the survival of bovine blastocysts produced in vitro Cryobiology...