... classless end Cấu hình ban đầu cho router : R1 Router# configure terminal Enter configuration commands, one per line End with CNTL/Z Router(config)#hostname R1 R1(config)#line console R1(config-line)#password ... R1(config)# cấu hình cho router R2 : Router>enable Router#configure terminal Enter configuration commands, one per line End with CNTL/Z Router(config)#hostname R2 R2(config)#line console R2(config-line)#password ... R2(config-if)#exit R2(config)#^Z R2# cấu hình cho router R3 : Router# configure terminal Enter configuration commands, one per line End with CNTL/Z Router(config)#hostname R3 R3(config)#line console R3(config-line)#password...
... algorithm SPF algorithm • Hellos create and maintain adjacencies • Hellos create and maintain adjacencies • Hellos and holdtime may be configured • Hellos and holdtime may be configured Subnet ... (ABR) Level Backbone router LSP (link-state packet) LSA (link-state advertisement) CSNP and PSNP (complete and partial sequence Link-state acknowledgement packet Router Autonomous system number ... PDUs) PDU (protocol data unit) Packet NET (network entity title) IP destination address (subnet and host), used in a similar way to router ID NSAP (network service access point) IP destination...
... với ISIS để tối ưu place Công việc cuối ta kích chọn vào “auto route” toolbar tiếp chọn vào “edit strategies để thay đổi nội dung đường mạch cụ thể có phân vùng “power” (đường nguồn) “signal” (tín...
... Bài : Mạch dao động RLC Bài : Mạch Trigger Schmitt Phần 4: Mô số Bài : Thí nghiệm cổng AND Bài : Dùng cổng NAND thiết kế EX-OR Bài : Đèn sáng dần, tắt dần dùng vòng xoắn Bài : Mạch đếm bất đồng ... dao động RLC 39 Bài : Mạch Trigger Schmitt 49 Phần 4: Mô số 60 Bài : Thí nghiệm cổng AND 61 Bài : Dùng cổng NAND thiết kế EX-OR 66 Bài : Đèn sáng dần, tắt dần dùng vòng xoắn 70 Bài : Mạch đếm bất...
... Bài : Mạch dao động RLC Bài : Mạch Trigger Schmitt Phần 4: Mô số Bài : Thí nghiệm cổng AND Bài : Dùng cổng NAND thiết kế EX-OR Bài : Đèn sáng dần, tắt dần dùng vòng xoắn Bài : Mạch đếm bất đồng ... dao động RLC 39 Bài : Mạch Trigger Schmitt 49 Phần 4: Mô số 60 Bài : Thí nghiệm cổng AND 61 Bài : Dùng cổng NAND thiết kế EX-OR 66 Bài : Đèn sáng dần, tắt dần dùng vòng xoắn 70 Bài : Mạch đếm bất...
... in the corresponding diagram The frame relay cloud between R1, R2, and R3 should be partially meshed with no PVC between R1 and R2 The link from R4 to R5 should be Mbps with R4 providing clocking ... different from R1 and R2 Assign R5 the same Area ID as R4 Phase 4: Basic ISIS Configuration All routers must be configured as Level only R3's E0 must be the DR for the segment between itself and R4 ISIS ... type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR, P - periodic downloaded static route T - traffic...