... your dealer on other available options or equipment. Throughout this booklet, left is designated as the driver’s side of the vehicle, and right as the pas-senger’s side of the vehicle. Text, ... Note to owners In Canada, this manual is also available in French. To obtain a copy contact your dealer or write to: Note aux proprietaires Au Canada, ce manuel est également disponible en ... Vehicles with manual transmission:Adjust the seat until, with the clutch pedal fully depressed, your leg remains at a slight angle.Vehicles with Tiptronic S:Adjust the seat until, with your left...
... more portable than ZIP drives and other remote-storage devices, and are more convenient (and less fragile) than CD-RW disks. In short, USB Flash Drives may just be the perfect removable storage ... quickly, log in as the Administrator and copy the Ntuser.dat files for each existing user profile (more detailed information on user profiles will be provided in Chapter 10. Restoring the registry ... that of theft or loss of software and confidential data. Unless you disable all of the USB ports in your environment, they are impossible to defend against. Protective measures that you can take...
... OIL COOLER(a) Disconnect the 2 oil cooler hoses from the oil cooler.(b) Remove the oil cooler union bolt, plate washer, nut, oil cooler and O-ring.INSPECTION1. INSPECT ENGINE OIL COOLER(a) ... LUBRICATION – ENGINE OIL COOLER (w/ Oil Cooler)LU–19LUENGINE2AZ-FE LUBRICATIONENGINE OIL COOLER (w/ Oil Cooler)COMPONENTSWATER BY-PASS HOSEO-RINGENGINE OIL COOLEROIL FILTER SUB-ASSEMBLY9.0 ... OIL COOLER(a) Clean the oil cooler contact surface.(b) Install a new O-ring to the oil cooler.(c) Apply a light coat of engine oil to the threads and under the head of the oil cooler union...
... SYSTEMCH–5CHON-VEHICLE INSPECTION1. CHECK BATTERY ELECTROLYTE LEVEL(a) Check the electrolyte level.(1) If the electrolyte level is low, replace the battery (or add distilled water) and check ... WEARREPLACE CLUTCH PULLEY4CHECK FOR NOISE WHILE CLUTCH PULLEY IS OPERATINGREPLACE CLUTCH PULLEYREPLACE GENERATOR ASSEMBLY CH–42AZ-FE CHARGING – CHARGING SYSTEMCHPROBLEM SYMPTOMS TABLEResultSymptom ... pulley installed in the vehicle.(1) Visually check that the rotor in the generator operates with the engine started.(b) Check the lock function with the pulley removed from the vehicle.(1)...
... CONNECT OIL COOLER OUTLET HOSE (for Automatic Transaxle)(a) Connect the oil cooler outlet hose to the radiator assembly.7. CONNECT OIL COOLER INLET HOSE (for Automatic Transaxle)(a) Connect ... Transaxle)(a) Disconnect the oil cooler inlet hose from the radiator assembly.15. DISCONNECT OIL COOLER OUTLET HOSE (for Automatic Transaxle)(a) Disconnect the oil cooler outlet hose from the radiator ... Slowly fill the radiator with TOYOTA Super Long Life Coolant (SLLC).Specified capacity:6.2 liters (6.6 US qts, 5.5 lmp. qts)HINT:ã TOYOTA vehicles are filled with TOYOTA SLLC at the factory....
... AIR INLET LINE(a) Disconnect the air inlet line hose from the charcoal canister.(b) Check that air can flow freely into the air inlet line.If air cannot flow freely into the air inlet line, ... SYSTEMEC–5ECON-VEHICLE INSPECTION1. VISUALLY INSPECT HOSE, CONNECTIONS AND GASKETS(a) Check that there are no cracks, leaks or damage.HINT:ã Detachment or other problems with the engine oil dipstick, filler ... canister assembly.Purge PortVent PortAir Inlet PortAirA111044E02Purge PortAir Inlet PortAirVent PortA111043E02Vent PortPurge PortAir Inlet PortPressure GaugeSSTA111042E02AirABA112886E01...
... engine running time -TIME DTC CLEAR Cumulative time after DTC cleared -DIST DTC CLEAR Accumulated distance from DTC cleared -WU CYC DTC CLEAR Warm-up cycle after DTC cleared -LABEL(Intelligent ... the tester: UNABLE TO CONNECT TO VEHICLE), a problem exists in either the vehicle or tester. In order to identify the location of the problem, connect the tester to another vehicle.If communication ... rpm650 to 750 rpm: Idling (Manual transaxle)610 to 710 rpm: Idling (Automatic transaxle)-VEHICLE SPDVehicle speed:Min.: 0 km/h, Max.: 255 km/hActual vehicle speed Speed indicated on...
... AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY(a) Remove the air cleaner filter element sub-assembly.(b) Visually check that there is no dirt, blockage, and/or damage to the air cleaner filter element.HINT:ã ... dirt or a blockage in the air cleaner filter element, clean it with compressed air.ã If any dirt or a blockage remains even after cleaning the air cleaner filter element with compressed air, ... MECHANICAL – VALVE CLEARANCEEMStandard exhaust valve clearance (cold):0.38 to 0.48 mm (0.0150 to 0.0189 in.)EXAMPLE:The 5.340 mm (0.2102 in.) lifter is installed, and the measured clearance is...
... that the fuel tube joint is pulled off.4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL5. CHECK FOR FUEL LEAKS (See page FU-8)6. INSTALL REAR FLOOR SERVICE HOLE COVER(a) Connect the fuel pump ... wiring connector.(b) Check for fuel leaks.(1) Check that there are no fuel leaks anywhere on the system after performing maintenance. If there is a fuel leak, repair or replace parts as necessary.(c) ... the No. 1 fuel pipe clamp.5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See page ES-419)6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL7. CHECK FOR FUEL LEAKSHINT:See page FU-9.8. INSTALL NO....