»Speed Control TM « SPC GAS SPRINGS, cushioned 2 . 21368 . 2007 . 1  Order No 2.5508.00.0307.01000 03/2007 P R O D U C T S ! A P P R O V E D 9 7 / 2 3 / E C 2 . 21369 . 2007 . 1  »Speed Control TM « SPC Gas Springs, cushioned 2486.12. FIBRO SPC Gas Springs »Speed Control TM « are designed to reduce or eliminate the sheet metal retainer bounce back which is often caused by the increased return travel speed in high speed presses (link drive presses). SPC Gas Springs feature an integral return travel delay which reduces the speed of the gas spring to 0.4 m/s over the last 30 mm of travel, allowing a soft arrival for the sheet metal retainer. Benefits of the »Speed Control TM « SPC Gas Springs, cushioned:  Prevents bounce back of sheet metal retainer.  Increased productivity through more efficient transport of components.  Easy to install in existing machines.  For travel 125 - 300 mm.  Can be connected to existing hose system. Installation: Example of how it works: Specifications: SPC Gas Spring 2486.12. P R O D U C T S ! subject to alterations 2 M8 x 13 deep (4x) 2) Option 1 – replace all gas springs with SPC gas springs Option 2 – corner solution (see below) SPC 2480.12./13. or 2484.12./13. LCF SPC Braking distance (~ 30 mm) *At room temperature with free airow »Speed Control TM « SPC Gas Springs provide a 90% reduction in sheet metal retainer bounce back. M8 Filling connection 1) 8 for 2486.12.05000. travel of sheet metal retainer per unit of time stroke in mm time in s sheet metal retainer without SPC sheet metal retainer with SPC SPC reduces speed to 0.4 m/s press speed 1.0 m/s Strokes per minute, depending on stroke travel, at max. 150 bar lling pressure* max strokes per minute (spm) Stroke travel of SPC in mm 2486.12.00750. 2486.12.01500. 2486.12.03000. 2486.12.05000. 1) 2) M10 for 2486.12.03000 and 2486.12.05000 2 . 21370 . 2007 . 1  3 »Speed Control TM « SPC Gas Springs, 2486.12. cushioned subject to alterations Force in daN at Piston Gas 150 bar / +20° C rod Cylinder volume Order no. Stroke max Start End* l ±0,25 l min c Ø d Ø d 1 e Ø f in l 2486.12.00750. 125 0740 0870 360 235 21 25 075,2 28,3 040 0,44 160 430 270 0,55 200 510 310 0,67 250 610 360 0,83 300 710 410 0,98 2486.12.01500. 125 1500 1900 370 245 24 36 095,2 42,4 060 0,73 160 440 280 0,91 200 520 320 1,11 250 620 370 1,36 300 720 420 1,62 2486.12.03000. 125 3000 3800 390 265 25,5 50 120,2 56,6 080 1,15 160 460 300 1,43 200 540 340 1,74 250 3900 640 390 2,14 300 740 440 2,53 2486.12.05000. 125 5000 6400 405 280 27,5 65 150,2 70,7 100 1,90 160 6500 475 315 2,33 200 6600 555 355 2,82 250 6600 655 405 3,43 300 6600 755 455 4,05 Dimensions for SPC Gas Spring 2486.12. Technical data: Installation options: bolted at the base collar ange mounted base ange mounted clamp ange mounting Pressure medium: Nitrogen max. lling pressure: 150 bar (at 20° C) min. lling pressure: 25 bar (at 20° C) Operating temperature: 0° to +80 °C Temperatur related force increase: ± 0.3 %/°C Recommended max. strokes/min.: see specications Braking distance: ~ 30 mm Piston rod speed, decelerated: 0.4 m/s Piston rods: nitrided Cylinder: burnished Spares kit: for all types of gas spring Note: For further informations see Section F in the Main Catalogue. P R O D U C T S ! FIBRO GmbH · Division Standard Parts · Postfach 1120 · DE-74851 Hassmersheim · Tel. 0 62 66-73-0* · Fax 0 62 66-73-237 · info@fibro.de · www.fibro.com 2 . 21371 . 2007 . 1  Overview of Gas Springs . 2.5508.00.0307.01000 03/2007 P R O D U C T S ! A P P R O V E D 9 7 / 2 3 / E C 2 . 21369 . 2007 . 1  Speed Control TM « SPC Gas Springs, cushioned 2486.12. FIBRO SPC Gas Springs Speed Control TM « are designed to reduce. 21370 . 2007 . 1  3 Speed Control TM « SPC Gas Springs, 2486.12. cushioned subject to alterations Force in daN at Piston Gas 150 bar / +20° C rod