Tài liệu Single Platform For T1/E1 Concentration to DS3 or STS-1 pptx

4 270 0
Tài liệu Single Platform For T1/E1 Concentration to DS3 or STS-1 pptx

Đang tải... (xem toàn văn)

Thông tin tài liệu

ThinMux Multiplexers • Software configurable mixed T1 and E1 services • Flexible Time Slot Assignment • Complete 1+1 protection • Low power consumption • Integrated forced air cooling • Craft screen and TL-1 management capability • BITS timing input • Telecordia HMA compliant Single Platform For T1/E1 Concentration to DS3 or STS-1 Features: • Industry's smallest form factor multiplexers • Interchangeable DS3 and STS-1 multiplexer options • Compatible with Wideband System 3190 multiplexers • Integrated Test Head functionality • 10Base-T management port • Simple installation via standard high- density connectors ADC’s ThinMux ™ product family helps carriers build today's access networks that can easily adapt to meet tomorrow's needs. Only the ThinMux products provide a single platform to encompass many universal standards (SONET/SDH, DS3, T1/E1). As bandwidth requirements increase and network technologies change, ThinMux is quickly and easily upgraded by replacing the multiplexer card within the chassis. Complete flexibility in delivering unique T1/E1 (or mixed) services without additional provisioning, servicing, inventory or training is possible through the one time ADC ThinMux investment. 1/04 • 100530 ThinMux Description 2 www.adc.com • +1-952-938-8080 ThinMux Product Family The ThinMux multiplexers each consist of a 19” wide, 1 rack unit enclosure containing two multiplexer cards and an air-cooling assembly. The rear panel of the ThinMux chassis terminates all connections for complete rear wiring of the unit. This results in the industry’s most compact and highest service density multiplexer platform. The ThinMux chassis may contain two identical multiplexers providing complete 1+1 board, services and network interface protection. The same chassis is used with all ADC multiplexers, providing a clear migration path and investment protection on installed equipment. Migration from an asynchronous to a synchronous network interface requires no costly and time-consuming reconfiguration of the physical T1 or E1 end user services. All services (DS1 and E1) are provisioned via high density and industry standard 64-pin CHAMP connectors, enabling cost-effective installation and no reconfiguration as the network interface evolves. ThinMux Multiplexers Network Interfaces Multiplexed Services DS3 • 28 T1, 21 E1 or any valid combination on (ADC Catalog No THMX-DS3-L2) a DS3 connection • Software selectable T1/E1 services mix STS-1 • 28 T1, 21 E1 or any valid combination (ADC Catalog No THMX-STS1) on an STS-1 connection • Software selectable T1/E1 services mix Industry Leading Benefits • Credibility: NEBS approved, RBOC endorsed and Telecordia OSMINE (TIRKS, NMA) integrated • Migration Path: multiplexer cards are removable and are capable of being replaced by future ADC multiplexer cards that offer wider standards compliance, higher bandwidths and optical network interfaces • Investment Security: a single chassis, with multichassis compatibility of the multiplexer cards, ensures that any investment will be protected long into the future • One Platform Accommodating Worldwide Networks: service type is software selectable with T1/E1 applications multiplexed onto a single platform • Significant Cost Reduction In Providing T1 or E1 (or mixed) Services: standardization onto a single platform provides tangible benefits through no incurred costs for additional provisioning, servicing, inventory, training or obsolescence • Easy remote management: optional HiView Station Graphical User Interface (GUI) Application • Flexible remote management: TL-1, VT100 Craft Screens or SNMP with HiView manager application software • Multiple management connections: RS232 or 10Base-T Ethernet 3 www.adc.com • +1-952-938-8080 1/04 • 100530 ThinMux Applications Bundled Bandwidth Unbundled T1 Usage The industry leading size and high service density enables ADC’s ThinMux product family to cost-effectively aggregate low speed T1 or E1 subscriber interfaces onto one high-speed DS3 or STS-1 network interface. The rack space in today’s CLEC/DLEC co-location cages or ILEC Central Offices is at a premium – minimizing the space requirements while maximizing the service density significantly lowers service provisioning costs. A fully protected ThinMux multiplexer platform occupies a single rack unit to provide up to 28 T1 or 21 E1 interfaces. Integrated forced air cooling enables shelves to be stacked together with no wasted space for ventilation. Concentration of many low speed access network interfces into a single higher speed interface results in a more cost-effective use of capital intensive equipment such as a voice switch or a SONET ADM Transport Network Element. By utilizing the ThinMux’s flexible capabilities, low speed interfaces on voice switches and SONET ADMs can be replaced with higher speed interfaces, thus extending the life of the existing infrastructure. For Technical Specifications of the ThinMux components, refer to the individual HXU-359, HXU-360 and ACE-COML1 User Manual Chassis Specifications Rear Panel Interfaces DS3/STS-1: BNC, female DS1/E1: 64-pin AMP (champ), female Craft: DB-9, female Ethernet/Telnet: RJ-45 Alarm Contacts: wirewrap pins, CRT, MAJ, MIN Audible Alarm: wirewrap pins, NO, NC Visible Alarm: wirewrap pins, NO, NC Power: dual screw terminals BITS A/B: wirewrap pins Physical Specifications Height: 1.75” (1RU) Width: 17.375” Depth: 12” Weight: <10 lbs. (fully configured) Power Requirements Input Voltage Range: -60VDC to -42.5VDC Input Current: refer to HXU multiplexer specifications Power Dissipation: refer to HXU multiplexer specifications Environmental Operating Temperature: -40ºC to 65ºC ambient Requirements Storage Temperature: -40ºC to 70ºC Relative Humidity: 10% to 95% (non-condensing) Altitude: 0 to 4000 m Electrostatic Discharge: up to 15K volts Regulatory Approvals FCC Part 15, Class A, Part 68 UL 1950, CAN/CSA-C22.2, Number 950-95 NEBS Compliance GR-63-CORE, Level 3 GR-1089-CORE, Type 2 and 4 Specifications Catalog No. THMX-DS3-L2 THMX-STS1 Description ThinMux Multiplexer Kit: ACE-COML1 multiplexer enclosure with fans, two ADC HXU-360 DS3 multiplexers and ACE-MK mounting hardware ThinMux Multiplexer Kit: ACE-COML1 multiplexer enclosure with fans, two ADC HXU-359 STS-1 multiplexers ACE-MK mounting hardware Ordering Information ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer. 100530 1/04 Revision © 2001, 2004 ADC Telecommunications, Inc. All Rights Reserved Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 For a listing of ADC's global sales office locations, please refer to our web site. . Integrated forced air cooling • Craft screen and TL-1 management capability • BITS timing input • Telecordia HMA compliant Single Platform For T1/E1 Concentration to. ThinMux multiplexer platform occupies a single rack unit to provide up to 28 T1 or 21 E1 interfaces. Integrated forced air cooling enables shelves to be stacked together

Ngày đăng: 17/01/2014, 10:20

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan