Value-Added Module System LGX Compatible ADC's Value-Added Module (VAM) System can now be incorporated into installed LGX fiber frames ADC's LGX-compatible products encourage lineup consistency while improving fiber cable management ADC's LGX-compatible VAMs allow service providers to incorporate optical splitters for circuit monitoring and video distribution VAMs can also be configured with wavelength division multiplexing capabilities to increase transmission capacity over existing fiber lines Various input and output interface options are available Features: • Enclosed plug-in modules Optical components are protected from physical and environmental damage • Monitor and/or test Enables providers to troubleshoot networks without forcing disruption of service • Removable straight retainers Maintain minimum bend radius of fiber patch cords and allow single fiber access • Custom configurations Custom splitter configurations available upon request • Flexible platform Modules can be created for new applications quickly and easily to meet customer requirements Value-Added Module System LGX Compatible Value-Added Module System LGX Chassis The 7" (17.78 cm) LGX VAM chassis is designed to fit into any open chassis location within new or existing LGX-compatible fiber frames It can accommodate a maximum of 12 plug-in modules, 12 bulkhead plates, 12 blank plates, or any combination thereof The mounting slots are oriented vertically The 3.5" (8.89 cm) LGX VAM chassis is designed to fit into any 19" (48.26 cm) or 23" (58.42 cm) environment It can accommodate a maximum of four plug-in modules, four bulkhead plates, four blank plates or any combination thereof The mounting slots are oriented horizontally to allow standard LGX plug-in modules to be used while maximizing density and minimizing rack space allotment Ordering Information Dimensions (HxWxD) Description Catalog Number FVM-VLM19X700-W 7" unloaded chassis; 7" x 19/23" x 11" VAMs mount vertically; (17.78 x 48.26/58.42 x 27.94 cm accommodates up to 12 modules Description 3.5" unloaded chassis; VAMs mount horizontally; accommodates up to modules Dimensions (HxWxD) Catalog Number 3.50" x 18.76" x 11" (8.89 x 47.65 x 27.94 cm) FVM-LGX19X350-W 12/01 • 891-LGX Ordering Information w w w a d c c o m • + - - - 8 • - 0 - 6 - Value-Added Module System LGX Compatible Video Splitter Module Ordering Information 12/01 • 891-LGX Value-Added Module System Catalog Number VLM- Module Option Input front, output front Input rear, output front Split Ratio 2000 1x2 2100 1x2 2200 1x2 2300 1x2 2350 1x2 2400 1x2 2500 1x2 2600 1x2 2700 1x2 2800 1x2 2900 1x2 2950 1x2 2030 1x2 3900 1x3 4900 1x4 5300 1x5 6000 1x6 7000 1x7 8000 1x8 9000 1x9 A110 1x10 B111 1x11 C112 1x12 D113 1x13 E114 1x14 F115 1x15 G116 1x16 M132 1x17 Input Connector/Adapter Singlemode 2U FC ultra polish 2A FC angled polish 4U ST® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5® angled polish 00 Bare fiber or Multimode** 5F ST® 50/125 5U ST® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5® 62.5/125 LN LX.5® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber Output Connector/Adapter Singlemode 2U FC ultra polish 2A FC angled polish 4U ST® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5® angled polish 00 Bare fiber or w w w a d c c o m • 50/50 55/45 60/40 65/35 66.6/33.3 70/30 75/25 80/20 85/15 90/10 95/5 99/1 50/50 33/33/33 25/25/25/25 20/20/20/20/20 16.6/16.6/ 16.6 14.3/14.3/ 14.3 12.5/12.5/ 12.5 11.1/11.1/ 11.1 10/10/10/ 10 9.1/9.1/ 9.1 8.33/8.33 8.33 7.7/7.7/ 7.7 7.14/7.14 7.14 6.66/6.66/ 6.66 6.25/6.25/ 6.25 3.125/3.125/ 3.125 Output Pigtail Length† (in meters) Example: 00 = No pigtail 01 = meter 10 = 10 meters Input Pigtail Length† (in meters) Example: 00 = No pigtail 01 = meter 10 = 10 meters † Leave 00 for adapter option Number of Splitters A Single splitter B Dual splitter C Triple splitter Other split ratios are available Call ADC Technical Assistance Center at 1-800-366-3891, Ext 73475 or visit our website at www.adc.com Multimode** 5F ST® 50/125 5U ST® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5® 62.5/125 LN LX.5® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber Splitter Type LEAVE Wideband 1310 and BLANK 1550 nm G 1310 nm wavelength flattened J 1550 nm wavelength flattened Input Front, Output Front REAR Input Rear, Output Front FRONT REAR **Contact ADC for multimode specifications and available split ratios FRONT OUT OUT IN OUT 1xN IN OUTPUT OUTPUT INPUT OUT 1xN OUTPUT OUTPUT INPUT + - - - 8 • - 0 - 6 - Value-Added Module System LGX Compatible Singlemode Wideband Optical Splitter Specifications 12/01 • 891-LGX Value-Added Module System Other splitter configurations are available Please call ADC Technical Assistance Center, 1-800-366-3891, ext 73475, or visit our website at www.adc.com Splitter Number Splitter Type 2000 2100 2200 2300 2350 2400 2500 2600 2700 2800 2900 2950 2030 3900 4900 5300 6000 7000 8000 9000 A110 B111 C112 D113 E114 F115 G116 M132 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 2x2 1x3 1x4 1x5 1x6 1x7 1x8 1x9 1x10 1x11 1x12 1x13 1x14 1x15 1x16 1x32 Splitter Ratio 50/50 55/45 60/40 65/35 66.6./33.3 70/30 75/25 80/20 85/15 90/10 95/5 99/1 50/50 33/33/33 25/25/25/25 20/20/20/20/20 16.6/16.6/ 16.6 14.3/14.3/ /14.3 12.5/12.5/ 12.5 11.1/11.1/ /11.1 10/10/10 /10 9.1/9.1/ /9.1 8.3/8.3/ /8.3 7.7/7.7/ /7.7 7.14/7.14/ /7.14 6.66/6.66/ /6.66 6.25/6.25/ 6.25 3.13/3.13/ 3.13 Maximum Insertion Loss* 3.7/3.7 3.2/4.1 2.7/4.7 2.3/5.3 2.2/5.5 2.0/6.0 1.6/6.8 1.3/7.8 1.0/9.2 8/11.2 5/14.4 0.3/22.5 3.7/3.7 5.9/5.9/5.9 7.4/7.4/7.4/7.4 8.6/8.6/8.6/8.6/8.6 9.8/9.8/9.8/ /9.8 10.6/10.6/ /10.6 11.3/11.3/ /11.3 11.5/11.5/ /11.5 12.1/12.1/ /12.1 13.1/13.1/ /13.1 13.3/13.3/ /13.3 13.8/13.8/ /13.8 13.8/13.8/ /13.8 14.5/14.5/ /14.5 14.9/14.9/ 14.9 18.5/18.5/ 18/5 Typical Insertion Loss* 3.1/3.1 2.7/3.6 2.3/4.1 2.0/4.7 1.9/5.0 1.7/5.4 1.4/6.2 1.1/7.1 8/8.4 6/10.2 4/13.2 NA/NA 3.1/3.1 5.0/5.0/5.0 6.2/6.2/6.2/6.2 7.3/7.3/7.3/7.3/7.3 8.1/8.1/8.1 /8.1 8.9/8.9/ /8.9 9.5/9.5/ /9.5 9.9/9.9/ /9.9 10.4/10.4/ /10.4 10.9/10.9/ /10.9 11.3/11.3/ /11.3 11.6/11.6/ /11.6 11.8/11.8/ /11.8 12.4/12.4/ /12.4 12.6/12.6/ 12.6 15.8/15.8/ 15.8 * Does not include connector loss See table on the following page or call ADC Technical Assistance Center, 1-800-366-3891, ext 73475 Maximum Insertion Loss Maximum insertion loss is the upper limit of insertion loss for the coupler and applies over the entire wavelength range specified in the bandpass Typical Insertion Loss Typical insertion loss is the expected insertion loss value for the coupler measured at the specified center wavelength (i.e., 1310 nm and/or 1550 nm) w w w a d c c o m • + - - - 8 • - 0 - 6 - Value-Added Module System LGX Compatible MATERIAL Fiber: Jacket: Housing: Corning SMF-28 0.900 mm hytrel tube Stainless steel tube OPTICAL Bandpass Wavelength 1: Wavelength 2: Directivity: Reflectance: Polarization Stability: 1260/1360 nm 1430/1580 nm 55 dB minimum < -55 dB dB maximum MECHANICAL Cable Retention: 45 kg (1.0 lb.) maximum for 25 mm and 900 mm fiber, kg (2.2 lbs.) maximum for cabled fiber assemblies 300 cycles; 45 kg (1.0 lb.) maximum load (fiber cable only) 100 cycles; 45 kg (1.0 lb.) maximum load (fiber cable only) 10-55 Hz per FOTP II condition I drops from 1.5 meters All materials used in fabrication of coupler housing meet UL 94, Level V-I requirements Flex: Twist: Vibration: Impact: Flammability: ENVIRONMENTAL Humidity: Thermal Aging: Temperature Cycling: 336 hours, 60°C at 95% relative humidity 336 hours, 85°C 336 hours, -40°C to 85°C Singlemode Optical Connector Specifications INSERTION LOSS (dB) RETURN LOSS (dB) Ultra Polish PC Connectors: 0.3 dB maximum 0.15 dB typical 57 dB minimum Angled Polish Connectors: 0.5 dB maximum 0.2 dB typical 65 dB minimum 12/01 • 891-LGX Value-Added Module System Singlemode Optical Splitter Specifications w w w a d c c o m • + - - - 8 • - 0 - 6 - Value-Added Module System LGX Compatible 12/01 • 891-LGX Value-Added Module System WDM Module Ordering Information Catalog Number VLM-W Configuration MUX front, DEMUX front MUX rear, DEMUX front Mux Port Connector/Adapter 2U FC ultra polish 2A FC angled polish 4U ST® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5® angled polish 00 Bare fiber Demux Port Pigtail Length Length† (in meters) Example: 00 = No pigtail 01 = meter 10 = 10 meters Module Configuration A Single B Dual C Triple WDM Type (λ , λ ) A Undirectional multiplexer C Undirectional demultiplexer E Bidirectional λ Tx/λ Rx G Bidirectional λ Rx/λ Tx J 45 dB isolation, pass 1310 K 45 dB isolation, pass 1550 L (Dual only) unidirectional multiplexer, undirectional demultiplexer* M (Dual only) bidirectional λ Tx/λ Rx, bidirectional λ Tx/λ Rx Demux Port Connector/Adapter 2U FC ultra polish 2A FC angled polish 4U ST® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5® angled polish 00 Bare fiber 2 2 * WDM Type "L" includes (1) unidirectional multiplexer (standard isolation) and (1) unidirectional demultiplexer (isolation specified by next character) Mux Port Pigtail Length Length† (in meters) Example: 00 = No pigtail 01 = meter 10 = 10 meters † Leave 00 for adapter option Wavelength A 1310 (λ )/1550(λ ) B 1533 (λ )/1557(λ ) E 1550 (λ )/1625(λ ) F 1310 (λ )/1625(λ ) 2 2 Isolation Standard High Very high In the ordering charts, the abbreviation “mux” references the multiplexed side of the WDM, the side where two optical signals coexist on one fiber The abbreviation “demux” references the demultiplexed side of the WDM, the side where each signal appears on its own fiber Both unidirectional and bidirectional WDMs are available as shown below UNIDIRECTIONAL MULTIPLEXER 1310 UNIDIRECTIONAL DEMULTIPLEXER 1310 1550 1310 1550 MUX MUX DEMUX BIDIRECTIONAL TRANSMISSION 1310 DEMUX 1310 1550 1550 1310 1550 DEMUX MUX 1550 1310 1310 1550 MUX DEMUX 1550 w w w a d c c o m • + - - - 8 • - 0 - 6 - Value-Added Module System LGX Compatible Mux Front, Demux Front REAR FRONT Demux Demux WDM Mux FRONT Demux Demux WDM Mux 12/01 • 891-LGX Value-Added Module System REAR Mux Rear, Demux Front w w w a d c c o m • + - - - 8 • - 0 - 6 - Value-Added Module System LGX Compatible 12/01 • 891-LGX Value-Added Module System Singlemode WDM Specifications MATERIAL Fiber: Jacket: Corning SMF-28 0.900 mm OPTICAL Uniformity: Polarization Stability: Bandpass: Insertion Loss: Reflectance: Isolation Near End: Far End: 1.0 Log2N (where N = number of channels) 0.5 dB maximum (see table below) (see table below) < -55 dB 55 dB (see table below) MECHANICAL Cable Retention: 45 kg (1.0 lb.) maximum for 250 mm and 900 mm fiber; 1.0 kg (2.2 lbs.) maximum for cabled fiber assemblies 300 cycles; 45 kg (1.0 lb.) maximum load (fiber cable only) 100 cycles; 45 kg (1.0 lb.) maximum load (fiber cable only) 10-55 Hz per FOTP II condition I drops from 1.5 meters All materials used in fabrication of the coupler housing meet UL 94, Level V-I requirements Flex: Twist: Vibration: Impact: Flammability: ENVIRONMENTAL Humidity Resistance: Thermal Aging: Temperature Cycling: 336 hours, 60°C at 95% relative humidity 336 hours, 85°C 336 hours, -40°C to 85°C 1310/1550 nm MAXIMUM INSERTION LOSS* MINIMUM ISOLATION (dB) (dB) PASSBAND (nm) Multiplexer/Demultiplexer: High Isolation Demultiplexer: Very High Isolation Demultiplexer: Wavelength Filters: 1310 ± 20 nm and 1550 ± 20 nm 1310 ± 20 nm and 1550 ± 20 nm 0.3 0.7 15 30 1310 ± 20 nm and 1550 ± 20 nm 1310 ± 20 nm and 1550 ± 20 nm 1.0 0.3 45 15 1533/1557 nm Unidirectional Multiplexer: High Isolation Undirectional Multiplexer or Bidirectional Multiplexer/Demultiplexer: Very High Isolation Undirectional Multiplexer or Bidirectional Multiplexer/Demultiplexer: Filter Passing 1533 nm: Filter Passing 1557 nm: PASSBAND (nm) MAXIMUM INSERTION LOSS* (dB) MINIMUM ISOLATION (dB) 1533 ±3 and 1557 ±3 nm 0.9 N/A 1533 ±3 and 1557 ±3 nm 1.8 20 1533 ±3 and 1557 ±3 nm 1533 ±3 nm 1557 ±3 nm 2.1 0.9 0.9 35 13 13 * Maximum Insertion Loss does not include connector loss See pages 4-5 for connector specifications and definitions w w w a d c c o m • + - - - 8 • - 0 - 6 - Value-Added Module System LGX Compatible 12/01 • 891-LGX Value-Added Module System Monitor Module Ordering Information Catalog Number VLM-M Input Connector Type Singlemode 2U FC ultra polish 2A FC angled polish 4U ST® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5® angled polish 00 Bare fiber or Multimode** 5F ST® 50/125 5U ST® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5® 62.5/125 LN LX.5® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber Output Connector Type Singlemode 2U FC ultra polish 2A FC angled polish 4U ST® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5® angled polish 00 Bare fiber or Multimode** 5F ST® 50/125 5U ST® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5® 62.5/125 LN LX.5® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber w w w a d c c o m • Monitor Pigtail Length Number of Circuits per VAM 1 circuit 2 circuits 3 circuits Split A B C E F H J K Output Pigtail Length Input Pigtail Length Length† (in meters) Example: 00 = No pigtail 01 = meter 10 = 10 meters Ratio 90/10 95/05 50/50 80/20 75/25 70/30 60/40 99/01 † Leave 000 for adapter option Monitor Connector Type Singlemode 2U FC ultra polish 2A FC angled polish 4U ST® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5® angled polish 00 Bare fiber or Multimode** 5F ST® 50/125 5U ST® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5® 62.5/125 LN LX.5® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber + - - - 8 • Module Style B Cross-connect customer premises D Dual monitor cross-connect G Dual monitor cross-connect J Dual monitor P Customer premises R Single monitor cross-connect * See detailed splitter and connector specifications on pages 4-5 Contact ADC for multimode specifications and available split ratios at 1-800-366-3891, Ext 73475 or visit our website at www.adc.com - 0 - 6 - 9 Value-Added Module System LGX Compatible B Customer Premises Monitor Module D Dual Monitor Cross-Connect Dual Monitor Cross-Connect G XX% XX% CUST MON Tx SRC MON 10% XX% SPLITTER SRC Rx 1x2 SPLITTER A 90% Rx MON Tx Mon Tx 1x2 10% CUST Rx 90% Rx SPLITTER Tx CUST Tx Tx Rx SRC Tx Dual Monitor Cross-Connect Rx Mon Tx MON XX% J 1x2 Rx Rx P Customer Premises Monitor Module R Single Monitor Cross-Connect Mon Tx 1x2 Mon Rx CUST Rx XX.XX% CUST MON 1x2 SPLITTER XX.XX% CUST Tx XX.XX% Tx AI XX.XX% Tx Rx 1x2 1x2 SPLITTER SRC MON SRC Rx XX.XX% 1x2 SPLITTER Rx XX.XX% Tx MON A2 Tx A SRC Tx Tx SRC Rx Rx SRC 12/01 • 891-LGX Value-Added Module System 1x2 SPLITTER B w w w a d c c o m • + - - - 8 • - 0 - 6 - 10 Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891, Ext 73475 • Outside of North America: +1-952-938-8080 Fax: +1-952-946-3292 For a complete listing of ADC's global sales office locations, please refer to our web site ADC Telecommunications, Inc., P.O Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products or features contained herein may be covered by one or more U.S or foreign patents An Equal Opportunity Employer 891-LGX 12/01 Original © 2001 ADC Telecommunications, Inc All Rights Reserved .. .Value-Added Module System LGX Compatible Value-Added Module System LGX Chassis The 7" (17.78 cm) LGX VAM chassis is designed to fit into any open chassis location within new or existing LGX- compatible. .. 891 -LGX Value-Added Module System Singlemode Optical Splitter Specifications w w w a d c c o m • + - - - 8 • - 0 - 6 - Value-Added Module System LGX Compatible 12/01 • 891 -LGX Value-Added Module. .. 891 -LGX Ordering Information w w w a d c c o m • + - - - 8 • - 0 - 6 - Value-Added Module System LGX Compatible Video Splitter Module Ordering Information 12/01 • 891 -LGX Value-Added Module System