1 MPLS Curriculum— Lab Setup Guide Overview This document describes the MPLS curriculum lab setup. It also contains the necessary initial router configurations. Lab Setup Guide Follow these steps to set up the laboratory for MPLS Curriculum exercises: n Wire the laboratory equipment according to the setup specified in the MPLS Curriculum Management Guide n Download the initial configurations to the Good, Cheap, NMS and Client routers. NMS.txt Good.txt Cheap.txt Client.txt n Download the initial configurations to the router acting as Frame Relay switch MPLS_WAN_Switch.t xt n Download the initial configuration to the routers inside the workgroup, named A1, A2, B1, B2, PE1, PE2, PE3, PE4 and P (see MPLS Curriculum Management guide for lab kit list details) WG1A1.txt WG1A2.txt WG1B1.txt WG1B2.txt WG1PE1.txt WG1PE2.txt WG1PE3.txt WG1PE4.txt WG1P.txt Note The above workgroup router configurations are specified for workgroup number 1, for any additional workgroup the configurations need to be modified appropriately. Note To detach the above files use the following procedure: select icon, copy it to the clipboard and detach it in your Windows Explorer to appropriate directory! . 1 MPLS Curriculum— Lab Setup Guide Overview This document describes the MPLS curriculum lab setup. It also contains the necessary. configurations. Lab Setup Guide Follow these steps to set up the laboratory for MPLS Curriculum exercises: n Wire the laboratory equipment according to the setup