Đang tải... (xem toàn văn)
Hướng dẫn 1. Kiểm tra dải tốc độ, áp suất, nhiệt độ, chất lượng dịch, độ nhớt và quay bơm. 2. Kiểm tra các điều kiện đầu vào của bơm, nếu nó có thể chấp nhận yêu cầu ứng dụng....
Vane Pump Series SDV SDV Hydraulics Fixed Displacement zp14 Catalogue HY0738-A/CH November 2004 Hydraulics Parker Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Contents Vane Pump Series SDV Introduction General applications instructions Maximum speed Pressure ratings Minimum allowable inlet pressure General characteristics SDV10 Ordering code Operating characteristics Technical data Dimensions SDV20 Ordering code Operating characteristics Technical data Dimensions SDV2010 Ordering code Operating characteristics Technical data Dimensions SDV2020 Ordering code 10 Operating characteristics 10 Technical data 10 Dimensions 11 General aplications Instructions Check speed range, pressure, temperature, fluid quality, viscosity and pump rotation Check inlet conditions of the pump, if it can accept application requirement Type of shaft : if would support operating torque Coupling must be chosen to minimize pump shaft load (misalignment,weight) Filtration : must be adequate for lowest contamination level Environment of pump : avoid pollution,shocks and noise reflection Hydraulics Parker Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Technical data Vane Pump Series SDV Minimum and maximum speed, pressure ratings Series Size 7 11 12 13 SDV10 SDV20 Theoretical Displacement Vi cm3/rev (in3/rev) 3,3 (.20) 6,6 (.40) 9,8 (.60) 13,1 (.80) 16,4 (1.00) 19,5 (1.19) 22,8 (1.39) 19,5 (1.19) 22,8 (1.39) 26,5 (1.62) 29,7 (1.81) 36,4 (2.22) 39,0 (2.38) 42,4 (2.59) Maximum speed HF-0, HF-1 HF-3, HF-4 HF-5 HF-2 RPM RPM 4200 1800 4200 1800 3900 1800 3000 1800 2400 1800 2100 1800 1800 1800 3600 1800 2700 1800 2400 1800 2100 1800 1800 1800 1800 1800 1800 1800 HF-0, HF-2 Int Bar (psi) 175 (2500) 175 (2500) 175 (2500) 175 (2500) 175 (2500) 150 (2200) 140 (2000) 175 (2500) 175 (2500) 175 (2500 175 (2500) 175 (2500) 150 (2200) 150 (2200) Maximum pressure HF-1, HF-4, HF-5 Cont Cont Bar (psi) 160 (2250) 160 (2250) 160 (2250) 160 (2250) 160 (2250) 140 (2000) 140 (2000) 160 (2250) 160 (2250) 160 (2250) 160 (2250) 160 (2250) 140 (2000) 140 (2000) HF-3 Cont Bar (psi) 130 (1900) 130 (1900) 130 (1900) 130 (1900) 130 (1900) 130 (1900) 130 (1900) 130 (1900) 130 (1900) 130 (1900) 130 (1900) 110 (1600) 110 (1600) 110 (1600) Bar (psi) 100 (1500) 100 (1500) 100 (1500) 100 (1500) 100 (1500) 100 (1500) 100 (1500) 110 (1600) 110 (1600) 110 (1600) 110 (1600) 100 (1400) 100 (1400) 100 (1400) HF-0, HF-2 = Anti-wear petroleum base HF-1 = Non anti-wear petroleum base HF-5 = Synthetic fluids HF-3 = Water-in-oil invert emulsions HF-4 = Water glycol solutions Minimum speed is 600 RPM For further information, if the performance characteristics outlined above not meet your own particular requirements, please consult your local Parker office Minimum allowable inlet pressure (bar absolute / psi) Series Ring size SDV10 7 SDV20 11 12 13 1500 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,85 (12.3) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,85 (12.3) 0,95 (13.8) 1800 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,85 (12.3) 1,00 (14.5) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,95 (13.8) 1,03 (14.9) 1,05 (15.2) 2100 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,85 (12.3) 1,00 (14.5) 2400 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 0,95 (13.8) 0,80 (11.6) 0,80 (11.6) 0,85 (12.3) 0,95 (13.8) 0,80 (11.6) 0,80 (11.6) 0,95 (13.8) Speed (RPM) 2700 3000 0,80 0,80 (11.6) (11.6) 0,80 0,80 (11.6) (11.6) 0,80 0,80 (11.6) (11.6) 0,85 0,95 (12.3) (13.8) 3300 0,80 (11.6) 0,80 (11.6) 0,80 (11.6) 3600 0,80 (11.6) 0,80 (11.6) 0,85 (12.3) 3900 0,80 (11.6) 0,80 (11.6) 0,95 (13.8) 4200 0,80 (11.6) 0,80 (11.6) Size 0,80 (11.6) 0,80 (11.6) 0,85 (12.3) 0,95 (13.8) 1,01 (14.6) 11 12 13 Multiply absolute pressure by 1,25 for HF-3, HF-4 fluids by 1,35 for HF-5 fluids by 1,10 for ester or rapeseed base Use the cartridge with the highest absolute pressure for double pumps General characteristics Series Mounting standard Weight kg (lb) Moment of inertia kgm2x10-4 (lb.in2) Code Port connections Suction P Pressure S B P S SDV10 SAE A 4.5-6.8 (10 -15) 0.5 (0.17) NPTF 1-5/16 12UNF-2B G1 1/2 NPTF SDV20 SAE A 7.3-8.2 (16-18) 2.2 (0.75) 1-1/4 NPTF 1-5/8 12UNF-2B G 1-1/4 3/4 NPTF Code F B 3/4 16UNF-2B G 1/2 1-1/16 12UNF-2B G 3/4 S B P1* SDV2010 SAE B 13.6 ( 30.0) 2.6 (0.90) SDV2020 SAE B 15.9 (35.0) 4.3 (1.50) * P1 = Pressure port near the shaft bolts flange 1-1/2 dia bolts flange ** P2 = Pressure port near the cover end Hydraulics dia P2** P1-P2 1-1/16 12UNF-2B 3/4 16UNF-2B *** 1-1/16 12UNF-2B 1-1/16 12UNF-2B G 3/4 *** P1 = G 3/4 P2 = G 1/2 Parker Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Ordering code Vane Pump Series SDV10 Model No SDV 10 - P S - C L - P Vane pump Series Identity Series 10 Shaft rotation (view on shaft end) L = Counter-clockwise Omit for clockwise Mounting = 2-bolt flange, 1/4 pilot (SAE A) (standard) Position of outlet port (Viewed from cover end of pump) A = Opposite inlet port B = 90 CCW from inlet C = In line with inlet D = 90 CW from inlet Shaft = Straight keyed 11 = Splined 38 = 11 teeth - 3/4 OD Inlet port connections P = NPTF thread S = 5/16-12 UNF-2B thread B = G (BSPP) Ring size (Delivery at 1200 rpm and 100 psi) = USgpm = USgpm = USgpm = USgpm = USgpm = USgpm = USgpm Outlet port connections P = 1/2 NPTF thread S = 3/4 -16 UNF-2B thread B = G 1/2 (BSPP) Operating characteristics Model Series Displ cm3/rev (in3/rev) Ring Size Max Pressure bar (psi) 3,3 (.20) 175 (2500) 6,6 (.40) 175 (2500) 9,8 (.60) 175 (2500) 13,1 (.80) 175 (2500) 16,4 (1.00) 175 (2500) 19,5 (1.19) 152 (2200) 22,8 (1.39) 138 (2000) SDV10 Speed RPM 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 Typical delivery L/min (Usgpm) bar 4,0 5,0 5,9 7,9 9,9 11,9 11,8 14,7 17,6 15,7 19,7 23,6 19,7 24,6 29,5 23,4 29,3 35,1 27,4 34,2 41,0 PSI 1,0 1,3 1,6 2,1 2,6 3,1 3,1 3,9 4,7 4,2 5,2 6,2 5,2 6,5 7,8 6,2 7,7 9,3 7,2 9,0 10,8 Typical input power KW (hp) 150 bar 2000 PSI 2,0 0,5 3,0 0,8 3,9 1,0 5,9 1,6 7,9 2,1 9,9 2,6 9,8 2,6 12,7 3,4 15,6 4,1 12,3 3,3 16,3 4,3 20,2 5,3 16,3 4,3 21,2 5,6 26,1 6,9 19,2 5,1 25,1 6,6 30,9 8,2 23,2 6,1 30,0 7,9 36,8 9,7 0 35 500 70 1000 105 1500 140 2000 175 Lp Noise level [db(A)] m ISO 4412 75 Internal leakage qVs l/min [GPM] 25 50 70 & rings & rings 1, & rings 2500 2500 PSI 0,96 1,44 1,93 2,89 3,86 4,83 4,77 6,21 7,65 6,02 7,94 9,87 7,96 10,36 12,77 9,39 12,25 15,11 11,32 14,67 18,01 65 60 55 40 580 80 1160 120 1740 160 2300 Pressure p bar [PSI] Hydraulics 175 bar 0,71 1,08 1,44 2,16 2,88 3,60 3,56 4,63 5,70 4,49 5,92 7,36 5,94 7,73 9,52 7,00 9,13 11,27 8,44 10,94 13,43 1200 RPM 1500 RPM 1800 RPM Pressure p bar [PSI] Do not operate pump more than seconds at any speed or viscosity if internal leakage is higher than 50% of theoretical flow Total leakage is the sum of each section loss at its operating conditions 80 PSI 0,09 0,12 0,14 0,18 0,23 0,28 0,27 0,34 0,41 0,37 0,46 0,55 0,46 0,57 0,69 0,55 0,68 0,82 0,64 0,80 0,96 Noise level (typical) SDV10 - Internal leakage (typical) bar 0,07 0,09 0,10 0,14 0,17 0,21 0,20 0,26 0,31 0,27 0,34 0,41 0,34 0,43 0,51 0,41 0,51 0,61 0,48 0,60 0,71 Parker Hannifin China Hydraulic Vane Pump Shanghai, China 200 2900 Catalogue HY0738-A/CH Dimensions Inlet port 1"5/16 - 12 UNF - 2B thd (shown) or 1" NPTF thd or G 1" 19,05 19,02 (DIA 1.81) 82,55 82,50 (DIA 3.250/3.248) Vane Pump Series SDV10 46 (DIA 1.81) 12,70 (.50) 7,9 (.31) Outlet port 3/4" - 16 UNF - 2B thd (shown) or 1/2" NPTF thd or G 1/2" 76,20 (3.00) 24,60 (.97) 44,40 (1.75) B A Sq 4,75 (.187) key 25,4 (1.00) long Clockwise rotation 40,0 (DIA 1.57) SAE "A" flange 38,10 (1.50) 62,70 (2.47) 34,3 (DIA 1.35) 38,10 (1.50) 21,13/21,00 (.832/.827) 46 (DIA 1.81) 2,2 (.087) 6,35 / 6,10 (.250/.240) 11.1(DIA .437) holes Number 11 shaft 53,15 (2.09) 95,2 (DIA 3.75) 106,30 (4.19) 130,00 (DIA 5.12) Number 38 shaft 31,80 (1.25) 31,8 (1.25) 15,2 (DIA .598) Involute spline Flat root - teeth 16/32 diametral pitch 30 pressure angle Pitch dia - 14.29 (.5652) Major dia - 15,82/15,80 (.623/.622) Minor dia - 12,28/12,00 (.4835/.4725) 7,90 (.31) Dimensions Weight Kg (lb) Ring size A 15,6 (4.55) 91,9 (3.62) 115,6 (4.55) 91,9 (3.62) 4,5 - (10.0) 115,6 (4.55) 91,9 (3.62) 4,5 - (10.0) 121,9 (4.80) 98,3 (3.87) 5,6 - (12.5) 121,9 (4.80) 98,3 (3.87) 5,6 - (12.5) 127,0 (5.00) 103,4 (4.07) 6,8 - (15.0) 127,0 (5.00) 103,4 (4.07) 6,8 - (15.0) 20,6 (.811) 4,5 - (10.0) Involute spline Flat root - 11 teeth 16/32 diametral pitch 30 pressure angle Pitch dia - 17.46 (.6874) Minor dia - 15,87/15.62 (.6248/.6150) 19,01 18,93 (DIA .748/.745) 14,70 (.58) B Weight: SDV 10 Series: 4,5 - 6,8kg (10 - 15 lb) Hydraulics Parker Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Ordering code Vane Pump Series SDV20 Model No SDV 20 - P S - C L - P Series Identity Vane pump Series 20 Shaft rotation (view on shaft end) L = Counter-clockwise Omit for clockwise Mounting = 2-bolt flange, 1/4 pilot (standard) Position of outlet port (Viewed from cover end of pump) A = Opposite inlet port B = 90 CCW from inlet C = In line with inlet D = 90 CW from inlet 62 = Splined Shaft = Straight keyed 11 = Splined 38 = 11 teeth - 3/4 OD Inlet port connections P = 1/4 NPTF thread S = 5/8 - 12 UNF-2B thread B = G 1/4 (BSPP) Ring size (Delivery at 1200 rpm and 100 psi) 6=6 USgpm 7=7 USgpm 8=8 USgpm 9=9 USgpm 10=10 USgpm 11=11 USgpm 12=12 USgpm 13=13 USgpm Outlet port connections P = 3/4 NPTF thread S = 1/16-12UNF-2B thread B = G 3/4 (BSPP) Operating characteristics Model Series Displ cm3/rev (in3/rev) Ring Size Max Pressure bar (psi) 19,5 (1.19) 175 (2500) 22,8 (1.39) 175 (2500) 26,5 (1.62) 175 (2500) 29,7 (1.81) 175 (2500) 11 36,4 (2.22) 175 (2500) 12 39,0 (2.38) 152 (2200) 13 42,4 (2.59) Speed RPM 152 (2200) SDV20 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 bar 23,40 29,25 35,10 27,36 34,20 41,04 31,80 39,75 47,70 35,64 44,55 53,46 43,68 54,60 65,52 46,80 58,50 70,20 50,88 63,60 76,32 Typical delivery L/min (Usgpm) PSI 150 bar 2000 PSI 6,18 19,80 5,23 7,73 25,65 6,78 9,27 31,50 8,32 7,23 21,96 5,80 9,04 28,80 7,61 10,84 35,64 9,42 8,40 26,40 6,97 10,50 34,35 9,08 12,60 42,30 11,18 9,42 30,24 7,99 11,77 39,15 10,34 14,12 48,06 12,70 11,54 40,28 10,64 14,43 51,20 13,53 17,31 62,12 16,41 12,36 42,60 11,25 15,46 54,30 14,35 18,55 66,00 17,44 13,44 46,68 12,33 16,80 59,40 15,69 20,16 72,12 19,05 70 Lp Noise level [db(A)] m ISO 4412 1.5 Internal leakage qVs l/min [GPM] 25 50 75 1.0 1.25 7,8 & rings 12 & 13 rings ring 11 ring 0 35 500 70 1000 105 1500 140 1200 RPM 1500 RPM 1800 RPM 70 65 60 55 2000 Pressure p bar [PSI] 40 580 80 1160 120 1740 160 2300 Pressure p bar [PSI] Do not operate pump more than seconds at any speed or viscosity if internal leakage is higher than 50% of theoretical flow Total leakage is the sum of each section loss at its operating conditions Hydraulics 2500 PSI 9,1 11,8 14,5 10,1 13,3 16,4 12,1 15,8 19,5 13,9 18,0 22,1 18,5 23,6 28,6 19,6 25,0 30,4 21,5 27,3 33,2 Noise level (typical) SDV20 - 13 Internal leakage (typical) bar 0,4 0,5 0,5 0,4 0,5 0,6 0,5 0,6 0,7 0,6 0,7 0,8 0,7 0,8 1,0 0,7 0,9 1,1 0,8 1,0 1,2 Typical input power KW (hp) 80 PSI 175 bar 0,5 6,8 0,6 8,8 0,7 10,8 0,6 7,5 0,7 9,9 0,9 12,2 0,7 9,1 0,8 11,8 1,0 14,5 0,7 10,4 0,9 13,4 1,1 16,5 0,9 13,8 1,1 17,6 1,4 21,3 1,0 14,6 1,2 18,6 1,5 22,6 1,1 16,0 1,3 20,4 1,6 24,7 Parker Hannifin China Hydraulic Vane Pump Shanghai, China 200 2900 Catalogue HY0738-A/CH Dimensions Vane Pump Series SDV20 Outlet port 1"1/16 - 12 UNF - 2B thread SAE O-ring boss connection or 3/4" NPTF thd or G 3/4" 82,55 82,50 (DIA 3.250/3.248) Number Shaft Inlet port 1"1/4 NPTF or 1"5/8 - 12 UNF - 2B thd SAE O-ring boss connection or G 1"1/4 Clockwise rotation 12,70 (.50) 31,0 (1.22) A 4,00 (.156) 55,60 (2.19) Dimensions A 11 12 13 125,2 (4.93) 131,6 (5.18) 131,6 (5.18) 131,6 (5.18) 136,6 (5.38) 140,2 (5.52) 140,2 (5.52) B 102,1 (4.02) 108,4 (4.27) 108,4 (4.27) 108,4 (4.27) 113,5 (4.47) 117,1 (4.61) 117,1 (4.61) 40,95 (DIA 1.612) 19,05 / 19,02 (DIA .750/.749) 21,10 / 21,00 (.832/.827) 31,8 (1.25) Involute spline Flat root - teeth 16/32 diametral pitch 30 pressure angle Pitch dia - 14.29 (.5652) Major dia - 15.82/15.80 (.623/.622) Minor dia - 12.28/12.00 (.4835/.4725) 7,9 (.31) Involute spline Flat root - 11 teeth 16/32 diametral pitch 30 pressure angle Pitch dia - 17.46 (.6874) Minor dia - 15.87/15.62 (.6248/.6150) 20,6 (.811) Weight Kg (lb) 7,3 - (16.0) 7,7 - (17.0) 7,7 - (17.0) 7,7 - (17.0) 8,0 - (17.5) 8,2 - (18,0) 8,2 - (18.0) Weight: SDV 20 Series: 7,3 - 8,2kg (16 - 18 lb) Hydraulics 130,0 (DIA 5.12) 19,01 18,93 (DIA .748/.745) 19,01 18,93 (DIA .748/.745) 14,70 (.58) Involute spline Flat root - 11 teeth 16/32 diametral pitch 30 pressure angle Pitch dia - 17.46 (.6874) Minor dia - 15.87/15.62 (.6248/.4725) 95.2 (DIA 3.75) Number 38 shaft 31,80 (1.25) 37,30 (1.47) Ring size 11.1 (DIA .437) holes Number 62 shaft 74,80 (2.94) SAE "A" flange 29,5 (DIA 1.161) 55,60 (2.19) 2,0 (.08) 3,8 (.148) 4,4 (.173) Number 11 shaft 53,15 (2.093) 3,2 (.126) Sq 4,76 (.1875) key 41,1 (1.62) long 66,00 (2.60) 55,60 (2.19) 106,30 (4.187) 67,60 (2.66) 47,0 (DIA 1.85) B Parker Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Ordering code Model No Vane Pump Series SDV2010 SDV 2010 - F 13 S S - CC - L - P Vane pump Series Identity Series 2010 Shaft rotation (view on shaft end) L = Left hand for counter-clockwise Omit for right hand Mounting = 2-bolt flange, pilot (standard) Position of outlet port (Viewed from cover end of pump) With n outlet opposite inlet AA = N outlet 135 CCW from inlet AB = N outlet 45 CCW from inlet AC = N outlet 45 CW from inlet AD = N outlet 135 CW from inlet With n outlet 90 CCW from inlet BA = N outlet 135 CCW from inlet BB = N outlet 45 CCW from inlet BC = N outlet 45 CW from inlet BD = N outlet 135 CW from inlet With n outlet in line with inlet CA = N outlet 135 CCW from inlet CB = N outlet 45 CCW from inlet CC = N outlet 45 CW from inlet CD = N outlet 135 CW from inlet With n outlet 90 CW from inlet DA = N outlet 135 CCW from inlet DB = N outlet 45 CCW from inlet DC = N outlet 45 CW from inlet DD = N outlet 135 CW from inlet Inlet port connections F = bolt flange 1/2 dia Shaft-end pump ring size (Delivery at 1200 rpm and 100 psi) = USgpm = USgpm = USgpm = USgpm 11 = 11 USgpm 12 = 12 USgpm 13 = 13 USgpm No outlet port (shaft end) S = 1/16 - 12 UNF-2B thd B = G 3/4 (BSPP) Cover-end pump ring size (Delivery at 1200 rpm and 100 psi = USgpm = USgpm = USgpm = USgpm = USgpm = USgpm = USgpm Shaft = Straight keyed 11 = Splined N outlet port (cover end) S = 3/4 -16 UNF-2B thread B = G 1/2 (BSPP) Operating characteristics Ring Size Displ cm3/rev (in3/rev) Max Pressure bar (psi) 19,5 (1.19) 175 (2500) 22,8 (1.39) 175 (2500) Model Series 26,5 (1.62) 175 (2500) 29,7 (1.81) 175 (2500) P1 11 36,4 (2.22) 175 (2500) 12 39,0 (2.38) 152 (2200) 13 42,4 (2.59) 152 (2200) 3,3 (.20) 175 (2500) 6,6 (.40) 175 (2500) 9,8 (.60) 175 (2500) 13,1 (.80) 175 (2500) 16,4 (1.00) 175 (2500) 9,5 (1.19) 152 (2200) 22,8 (1.39) Please refer to page 138 (2000) P2 Please refer to page Hydraulics Parker Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Dimensions Vane Pump Series SDV2010 Number shaft extension 12,70 (.50) Number 11 shaft 7,8 (.31) 9,40 (.37) 69,85 (2.750) 34,925 (1.375) 17,90 ((DIA .703) 29,20 (DIA 1.50) 1/2"-13 UNC-2B THD 22,35 (.88) DEEP HOLES 35,71 (1.406) 17,85 (.703) N OUTLET PORT 1"1/16 - 12 UNF - 2B THD or G 3/4" INLET PORT 38,1 (DIA 1.50) N OUTLET PORT 1"1/16 - 12 UNF - 2B THD or G 3/4" A 58,70 (2.31) B A C 45 76,20 3.00) 66,50 (2.62) 10 50,8 2.00) 55,60 (2.19) Ring size 106,30 (4.187) 24,54 / 24,41 (DIA .966/.961) 101,60 / 101,55 (DIA 4.000/3.998) Dimension Cover end Shaft end 120.7 (DIA 4.75 10 ,5 ) 60 38 (2 55,60 (2.19) 146,10 (5.75) 73,2 (2.88) 26,90 (1.06) VIEW - AA A 111,20 (4.38) Clockwise rotation nvolute spline Flat root - 13 teeth 30 pressure angle Pitch dia - 20.64 (.8125) Major dai - 22.13/22.15 (.873/.872) Minor dai - 18.63/18.35 (.7335/.7225) A 14.2 (DIA .56) THRU HOLES Ring size B Dimension Cover end Shaft end C 22,23 22,20 (DIA .875/.874) A B Weight Kg(Ib) C 1,2, 3, 207 (8 157) 183 (7.224) 107 (4 217) 4, 10, 11 225 (8 858) 201 (7 925) 118 (4 665) 1,2, 3, 7, 8, 213 (8 409) 189 (7.476) 113 (4 469) 4, 12, 13 228.5 (8 996) 204 (8 063) 122 (4 803) 1,2, 3, 10,11 218 (8 606) 194 (7.673) 118 (4 665) 6, 218.6 (8 606) 194 (7 673) 107 (4 217) 1,2, 3, 12,13 222 (8 744) 198 (7.811) 122 (4 803) 6, 7,8, 225 (8 858) 201 (7 925) 113 (4 469) 4,5 213 (8 409) 189 (7.476) 107 (4 217) 6, 10, 11 230 (9 055) 206 (8 122) 118 (4 665) 4,5 7, 8, 220 (8 661) 196 (7.728) 113 (4 469) 6, 12, 13 233.5 (9 193) 209 (8 260) 122 (4 803) Noise level (typical) SDV2010 - 13 - Internal leakage (typical) 75 Internal leakage qVs l/min [GPM] 25 50 75 1.0 1.25 1200 RPM 1500 RPM 1800 RPM V20 7, & rings V20 12 & 13 rings V20 ring V20 11 ring V10 & rings V10 & rings V10 1, & rings 0 35 70 105 140 175 500 1000 1500 2000 Lp Noise level [db(A)] m ISO 4412 13.6(30) 2500 65 60 0 40 580 80 1160 120 1740 160 2300 200 2900 Pressure p bar [PSI] Pressure p bar [PSI] Do not operate pump more than seconds at any speed or viscosity if internal leakage is higher than 50% of theoretical flow Total leakage is the sum of each section loss at its operating conditions Double pump noise level is given with each section discharging at the pressure noted on the curve Hydraulics 70 Parker Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Ordering code Model No Vane Pump Series SDV2020 SDV 2020 - F 13 S - CC - L - P Vane pump Series Identity Series 2020 Shaft rotation (view on shaft end) L = Left hand for counter-clockwise Omit for right hand Mounting = 2-bolt flange, pilot (standard) = 2-bolt flange, 1/4 pilot (optional) Position of outlet port (Viewed from cover end of pump) With n outlet opposite inlet AA = N outlet opposite inlet AB = N outlet 90 CCW from inlet AC = N outlet in line with inlet AD = N outlet 90 CW from inlet With n outlet 90 CCW from inlet BA = N outlet opposite inlet BB = N outlet 90 CCW from inlet BC = N outlet in line with inlet BD = N outlet 90 CW from inlet With n outlet in line with inlet CA = N outlet opposite inlet CB = N outlet 90 CCW from inlet CC = N outlet in line with inlet CD = N outlet 90 CW from inlet With n outlet 90 CW from inlet DA = N outlet opposite inlet DB = N outlet 90 CCW from inlet DC = N outlet in line with inlet DD = N outlet 90 CW from inlet Inlet port connections F = bolt flange 2.00 dia Shaft-end pump ring size (Delivery at 1200 rpm and 100 psi) = USgpm = USgpm = USgpm = USgpm 11 = 11 USgpm 12 = 12 USgpm 13 = 13 USgpm No outlet port (shaft end) S = 1/16 - 12 UNF-2B thd B = G 3/4 (BSPP) Cover-end pump ring size (Delivery at 1200 rpm and 100 psi = USgpm = USgpm = USgpm = USgpm 11 = 11 USgpm Shaft = Straight keyed 11 = Splined N outlet port (cover end) S = 1/16 - 12 UNF-2B thread B = G 3/4 (BSPP) Operating characteristics Model Series Ring Size Displ cm3/rev (in3/rev) Max Pressure bar (psi) 172 (2500) P1 & P2 19,5 (1.19) 22,8 (1.39) 172(2500) 26,5 (1.62) 172 (2500) 29,7 (1.81) 172(2500) 11 36,4 (2.22) 172 (2500) 12 39,0 (2.38) 152 (2200) 13 42,4 (2.59) 152 (2200) Speed RPM 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 Typical delivery L/min (Usgpm) bar 23,40 29,25 35,10 27,36 34,20 41,04 31,80 39,75 47,70 35,64 44,55 53,46 43,68 54,60 65,52 46,80 58,50 70,20 50,88 63,60 76,32 PSI 6,18 7,73 9,27 7,23 9,04 10,84 8,40 10,50 12,60 9,42 11,77 14,12 11,54 14,43 17,31 12,36 15,46 18,55 13,44 16,80 20,16 10 Hydraulics 150 bar 2000 PSI 19,80 5,23 25,65 6,78 31,50 8,32 21,96 5,80 28,80 7,61 35,64 9,42 26,40 6,97 34,35 9,08 42,30 11,18 30,24 7,99 39,15 10,34 48,06 12,70 40,28 10,64 51,20 13,53 62,12 16,41 42,60 11,25 54,30 14,35 66,00 17,44 46,68 12,33 59,40 15,69 72,12 19,05 Typical input power KW (hp) bar 0,4 0,5 0,5 0,4 0,5 0,6 0,5 0,6 0,7 0,6 0,7 0,8 0,7 0,8 1,0 0,7 0,9 1,1 0,8 1,0 1,2 80 PSI 0,5 0,6 0,7 0,6 0,7 0,9 0,7 0,8 1,0 0,7 0,9 1,1 0,9 1,1 1,4 1,0 1,2 1,5 1,1 1,3 1,6 175 bar 6,8 8,8 10,8 7,5 9,9 12,2 9,1 11,8 14,5 10,4 13,4 16,5 13,8 17,6 21,3 14,6 18,6 22,6 16,0 20,4 24,7 Parker Hannifin China Hydraulic Vane Pump Shanghai, China 2500 PSI 9,1 11,8 14,5 10,1 13,3 16,4 12,1 15,8 19,5 13,9 18,0 22,1 18,5 23,6 28,6 19,6 25,0 30,4 21,5 27,3 33,2 Catalogue HY0738-A/CH Dimensions Vane Pump Series SDV2020 N OUTLET PORT 1"1/16 - 12 UNF - 2B thd or G 3/4" Inlet port 50.8 (DIA 2.00) 9,40 (3.70) C B A Sq 4,8 (.187) key 31,8 (1.25) long Number shaft Ring size Dimension Cover end Shaft end 7, 8, A 14.3 (DIA .562) thru - holes Weight Kg(Ib) Dimension Cover end Shaft end C 121 (DIA 4.75) 22,23 / 22,20 (DIA 875/.874) Ring size B 29,20 (DIA 1.150) 174,80 (6.88) 146.05 (DIA 5.75) SAE "B" flange 55,60 (2.19) 111,20 (4.38) Clockwise rotation 101,60 / 101,55 (DIA 4.000/3.995) 24,54 / 24,41 (.966/.961) 55,60 (2.19) 69,80 (2.75) 74,70 (2.94) 58,70 (2.31) Involute spline Flat root - 13 teeth 16/32 diametral pitch 30 pressure angle Pitch dia - 20.64 (.8125) Major dai - 22.13/22.15 (.873/.872) Minor dai - 18.63/18.35 (.7335/.7225) 66,50 (2.62) N outlet port 1"1/16 - 12 UNF - 2B thd or G 3/4" 41,10 (1.62) 7,8 (.31) 77,80 (3.063) 38,90 (1.531) 1/2" - 13 UNC - 2B thd .94 deep - holes Number 11 shaft 12,70 (.50) 9,40 (3.70) 17,90 (DIA .703) 42,80 (1.687) 21,40 (.843) A B 211 (8 339) 188 (7 425) 114 (4 508) 7, 8, 10, 11 223 (8 787) 200 (7 874) C 119 (4 705) 10, 11 216 (8 535) 193 (7 622) 119 (4 705) 7, 8, 12, 13 226 (8 925) 203 (8 012) 123 (4 843) 12, 13 220 (8 673) 197 (7 760) 123 (4 843) 10,11 10, 11 228 (8 984) 205 (8 071) 119 (4 705) 7, 8, 7, 8, 218 (8 591) 195 (7 677) 114 (4 508) 10,11 12, 13 231 (9 122) 208 (8 201) 123 (4 843) 15 9(35) Noise level (typical) SDV2020 - 13 - 11 Internal leakage (typical) 1200 RPM 1200 RPM 1800 RPM 7,8 & rings 12 & 13 rings ring 11 ring 0 35 500 70 1000 105 1500 140 Lp Noise level [db(A)] m ISO 4412 Internal leakage qVs l/min [GPM] 25 50 75 1.0 1.25 75 2000 65 60 0 40 580 80 1160 120 1740 160 2300 200 2900 Pressure p bar [PSI] Pressure p bar [PSI] Do not operate pump more than seconds at any speed or viscosity if internal leakage is higher than 50% of theoretical flow Total leakage is the sum of each section loss at its operating conditions Double pump noise level is given with each section discharging at the pressure noted on the curve 11 Hydraulics 70 Parker Hannifin China Hydraulic Vane Pump Shanghai, China Parker Hannifin Fluid Power Systems and Components(Shanghai) Co.,Ltd Hydraulics 280 Yunqiao Road, Jin Qiao Export Processing Zone, Shanghai 201206,China Tel: 86-21-5031 2525 Fax: 86-21-5834 8975 Internet: www.parker.com 12 Hydraulics Catalogue HY0738-A/CH November 2004 Parker Hannifin China Hydraulic Vane Pump Shanghai, China ... Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Ordering code Vane Pump Series SDV1 0 Model No SDV 10 - P S - C L - P Vane pump Series Identity Series 10 Shaft rotation... Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Ordering code Model No Vane Pump Series SDV2 010 SDV 2010 - F 13 S S - CC - L - P Vane pump Series Identity Series 2010 Shaft... Hannifin China Hydraulic Vane Pump Shanghai, China Catalogue HY0738-A/CH Ordering code Model No Vane Pump Series SDV2 020 SDV 2020 - F 13 S - CC - L - P Vane pump Series Identity Series 2020 Shaft rotation