automatic transmission advanced automatic transmission diagnosis student reference book COURSE CODE: 37S07T0 ORDER NUMBER: FCS-14359-REF Updated January, 2006 Ford Customer Service Division Technical Training Course 37S07T0, Slide FCS-14359-REF Course 37S07T0, Slide Appropriate service methods and proper repair procedures are essential for the safe, reliable operation of all motor vehicles, as well as the personal safety of the individual doing the work This document provides general directions for accomplishing service and repair work with tested, effective techniques Following them will help assure reliability There are numerous variations in procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the individual doing the work This document cannot possibly anticipate all such variations and provide advice or cautions as to each Accordingly, anyone who departs from instructions provided in this document must first establish that he compromises neither his personal safety nor the vehicle integrity by his choice of methods, tools or parts As you read through the shop manual procedures, you will come across NOTES, CAUTIONS, and WARNINGS Each one is there for a specific purpose NOTES give you added information that will help you to complete a particular procedure CAUTIONS are given to prevent you from making an error that could damage the vehicle WARNINGS remind you to be especially careful in those areas where carelessness can cause personal injury The following list contains some general WARNINGS that you should follow when you work on a vehicle x x x x x x x x x Always wear safety glasses for eye protection Use safety stands whenever a procedure requires you to be under the vehicle Be sure that the ignition switch is always in the OFF position, unless otherwise required by the procedure Set the parking brake when working on the vehicle If you have an automatic transmission, set it in PARK unless instructed otherwise for a specific service operation Operate the engine only in a well-ventilated area to avoid the danger of carbon monoxide Keep yourself and your clothing away from moving parts when the engine is running, especially the fan and belts To prevent serious burns, avoid contact with hot metal parts such as the radiator, exhaust manifold, tail pipe, catalytic converter and muffler Do not smoke while working on the vehicle To avoid injury, always remove rings, watches, loose hanging jewelry, and loose clothing before beginning to work on a vehicle Tie long hair securely behind your head Keep hands and other objects clear of the radiator fan blades Electric cooling fans can start to operate at any time by an increase in under hood temperatures, even though the ignition is in the OFF position Therefore, care should be taken to ensure that the electric cooling fan is completely disconnected when working under the hood Course 37S07T0, Slide Course 37S07T0, Slide Course 37S07T0, Slide Core Electrical (34) Prerequisites The Automatic Transmission Curriculum consists of courses addressing automatic transmission theory of operation, diagnosis, and service Each course in the curriculum is a “building block” for the next course in the curriculum This curriculum is designed for technicians who want to learn the methods and techniques to properly diagnose and service automatic transmission systems and components The skills and knowledge gained from this curriculum will enable technicians to pursue training in other service specialty areas The Automatic Transmission Update course is a Web-based Training (WBT) course designed as an ongoing source of information on new transmissions/transmission/transaxles The course is required for currently certified technicians New technicians not have to take it Currently this course addresses the TorqShift transmission Future versions of the course will cover new content All technicians will be required to take future versions of the Automatic Transmission Update course to remain certified Technicians will be notified of need to take the course by electronic field communication When technicians take the course, it sets the time clock for when they have to take the next update course Course 37S07T0, Slide 57 Course 37S07T0, Slide 58 Course 37S07T0, Slide 59 Course 37S07T0, Slide 60 Course 37S07T0, Slide 61 Course 37S07T0, Slide 62 Course 37S07T0, Slide 63 Course 37S07T0, Slide 64 Course 37S07T0, Slide 65 Course 37S07T0, Slide 66 Course 37S07T0, Slide 67 Course 37S07T0, Slide 68 Course 37S07T0, Slide 69 Course 37S07T0, Slide 70 ... course Course 37S07T0, Slide Course 37S07T0, Slide Course 37S07T0, Slide 10 Course 37S07T0, Slide 11 Course 37S07T0, Slide 12 Course 37S07T0, Slide 13 Course 37S07T0, Slide 14 Course 37S07T0, Slide... hood Course 37S07T0, Slide Course 37S07T0, Slide Course 37S07T0, Slide Core Electrical (34) Prerequisites The Automatic Transmission Curriculum consists of courses addressing automatic transmission. .. the next update course Course 37S07T0, Slide The Automatic Transmission Curriculum consists of courses addressing automatic transmission theory of operation, diagnosis, and service Each course